Question about Suzuki Boulevard C90T Motorcycles

1 Answer

Can i use 55 watt bulbs in the driving lights on a 2006 boulevard c90t

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 484 Answers

If you use higher-wattage lamps in place of the factory ones, you run the risk of blowing fuses. You can calculate how many watts the fuse will handle based on P=IE, that is, watts = amps x volts. So if the factory lamps use 20W bulbs, 2x20=40, 40W=3.3Ax12V. 2x50=100, 100W=8.3Ax12V. So 50W lams will draw 5 more amps. You should not use higher amperage fuses in place of what the factory has installed because you can cause damage to your electrical system. Calculate the rest of the lamps in the circuit using the P=IE formaula and if it falls below the fuse's capacity, go for it.

Hope this helps, e-mail if you have questions,
matt
allrotor13b@gmail.com

Posted on Sep 20, 2009

  • matthew kuhl Sep 20, 2009

    i need to clarify; if the rest of the circuit's amp load PLUS the additional 5 amps of the 50 watt lamps falls below the fuse's amperage, then go ahead.



    matt

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to change rear and front tyre on c90t suzuki boulevard 2013?


Hi, Amir for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Suzuki, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
Suzuki Boulevard front tire removal
2006 Suzuki Boulevard Replace Rear Tire
Removing and replacing motorcycle tire from the rim
Suzuki VL1500 Service Manual
OEM parts for Suzuki
Suzuki VL1500K5 Supplementary Service Manual
Suzuki Intruder VL1500B Owner Manual


May 07, 2017 | 2013 Suzuki Boulevard C90T

1 Answer

2006 Suzuki Boulevard C90T four ways only one in the front and one in the back work any idea what's going on


Hi, Bigdoug44 you may have a faulty turn signal module before diagnosing any turn signal/running light/parking light issue make sure the bulb is good and the light fuse has continuity with a test light. If you have replaced you OEM lights with LED lights you are going to need a load equalizer. If no turn signals work the cause could be a faulty turn signal module or the connector going to it, look for corroded, loose, or broken pins/sockets. Contact spray cleaner is great for removing corrosion. If your speedometer does not function properly it will have to be fixed first because your turn signal module gets the data from the speedometer for normal turn signal function. If your front turn signals don't work use a test light to check for power and ground at the bulb socket, then start backtracking the wiring through every wire connector to the turn signal switch/button and check for continuity, go all the way back to the fuse if necessary to find the cause of the malfunction. If your rear turn signals don't work check your rear fender wiring harness connector first for corroded, broken, loose pins/sockets, power, and a good ground, (the harness connector is usually located under the seat on the front of the rear fender) then keep tracing the wiring look for obvious harness damage caused by the rear tire. If you still can't find the malfunction backtrack from the rear fender wiring harness connector. If one side does not work you could have a faulty turn signal switch or module check for continuity.
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
Suzuki VL1500 Service Manual
OEM parts for Suzuki
Suzuki 2013 C90T Boulevard User Manual
Suzuki Boulevard C90T 2006
Suzuki VL 1500 Intruder LC Boulevard C90

Apr 28, 2017 | 2006 Suzuki Boulevard C90T

1 Answer

2008 Suzuki Boulevard C90T starter solenoid location


Hi, Brett for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Suzuki, despair not, for a mere zero $ you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
2008 Suzuki Boulevard C90T starter solenoid location Google Search
05 C90T Starting Problem Maybe Compression Lock
Suzuki VL1500 Service Manual
OEM parts for Suzuki
Suzuki VZ1500 Owner Manual

Jan 08, 2017 | 2008 Suzuki Boulevard C90T

1 Answer

I have boulevard 2006 c90t did change oil and f1 ligth red is on


try removing positive cable from batt. for 5min.
replace turn ign. switch on about 5sec. dont crank it.
cut it off.now crank it.
see if that correct he problem

Apr 22, 2015 | 2006 Suzuki Boulevard C90T

1 Answer

Wont start no lights 2006 suzuki c90 t


Battery is dead or no capacity. Check charge. A battery can read correct voltage but have no capacity. battery should be 13.8 volts fully charged approximately.

Did this just happen after storage or was it working fine then had the problem>? Needs more details and history to diagnose. How old is the battery??.

Apr 13, 2015 | 2006 Suzuki Boulevard C90T

1 Answer

Remove lower fork tube


http://www.bikebandit.com/2006-suzuki-boulevard-c90t-vl1500t-front-damper/o/m147608sch518555

You'll need to remove bolt (part #11), and probably come up with something to hold (part #14) from spinning while you do.

Apr 15, 2014 | 2006 Suzuki Boulevard C90T

1 Answer

2009 Suzuki Boulevard C90T excessive vibration@


Hi, Anonymous and the usual suspects are:
1. Wheels and or tires worn or damaged.
2. Engine/transmission/vehicle not aligned properly.
3. Primary chain is badly worn or links too tight as a result of insufficient lubrication or misalignment.
4. Engine to transmission mounting bolts loose.
5. Upper engine mounting bracket loose.
6. Ignition timing incorrect due to a poorly tuned engine.
7. Internal engine problem flywheels have shifted.
8. Broken frame.
9. Stabilizer links worn or loose.
10. Rubber mounts loose or worn.
11. Rear fork pivot shaft nuts loose.
12. Front engine mounting bolts loose.
13. Worn out or broken universal joint on shaft drive models.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
C90T vibration and noise
Vibration
Suzuki VL1500 Service Manual
OEM parts for Suzuki
Suzuki 2013 C90T Boulevard User Manual

Mar 26, 2013 | 2009 Suzuki Boulevard C90T

1 Answer

FI light reset


Hi Terry, for more information about your question please visit the website below. Good luck and have a nice day.
2005 2009 Suzuki VL1500 Intruder Boulevard C90 C90T Service Repair Manual...

Mar 25, 2013 | 2006 Suzuki Boulevard C90T

1 Answer

Where are the spark plugs on a 2006 Suzuki C90T Boulevard


Look at the heads of the cylinders on either side of the bike. You will notice that a head on either side has smaller screws then the other. I believe they are 8mm screws. Under those heads (with the smaller screws) are located your spark plugs. When pulling them out make sure you spray comressed air around the plug to ensure no dirt gets in once you pull the plugs all the way out.
Regards,
GGrinds@clubsuzuki.org

Dec 01, 2010 | 2005 Suzuki Boulevard C90T

2 Answers

Where is the air filter located on a 2006 Suzuki C90T Boulevard Motorcycle?


It is not under the cover, If you find one there then you must be riding an 800cc C50.

The filter is under the so called 'tank'. To change it you need to remove the chrome speedo housing, unplug the instruments and you will see it up near your headstock. Remove the three screw that hold it in place and you will be able to lift it out.

Apr 02, 2010 | 2005 Suzuki Boulevard C90T

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

165 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

78267 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

4752 Answers

Richard
Richard

Level 2 Expert

83 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...