What could cause a1991 suzuki samurai to have no fire from a new coil?
no spark from coil directly?
is the cam turning, is the dizzy rotor spinning. ????
check all fuses first. Ig-coil, FI and dome.
then using diagnostic jumper wire or fuse, (as approp)
crank engine look for code 41 o 42.!!!
USA cars , answers only
our cars are all EFI that year.
no engine swaps to Suzuki G16A/B sidekick or tracker engines.!
1: engine cranks
2: no spark
3: The ECu makes spark
the CMP sensor in the DIzzy , (never fails if rotor turns, does rotor turn, if not cam belt igored and now snapped.)
the cam turns. the CMP fires. the ECU takes this CMP signal
and fires the ignitor next to coil and the coil charges, and release and BAM spark.
that is it.
the ECU will tell you when the CMP dies or the Ignitor fails
why not ask it.
1: key on
2: diagnostic jumper in place (flashes 12s for ok)
3: crank engine,for 5sec, not 1 ,not 2.
3: release key not off.
4: see code 41, or 42, BINGO !@!!!!
short out? have to replace? i dont wanna do all that
×