Question about 1994 Suzuki DR 350 S

1 Answer

1994 ltf3004wd king quad fuel pump connections,not sure what outlets are what,winds over wont start,not really getting fuel to carby,have good spark,compression average,did go before though.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 4 Answers

There are three connections to the fuel pump.
Fuel in/out at ends, the pipes should only reach to the correct ends. The IN pipe connects to the end toward front of the bike , OUT toward the back heading to carb.
A small connection on the back for the vacuum pipe from the carb.

This pump only spits the fuel along rather feabley, also check the gause on the fuel tap. When bleeding, remove the fuel pipe from the carb and blow into the tank in order to force the fuel through the pipes until all air is removed.

Posted on Jun 06, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 1995 Suzuki King Quad (LT-F4WDX). Wont accelerate when warmed up.


did you adjust the valves? check and make sure the fuel pump is putting out enough fuel, way past time to replace it. check your voltage too, the regulators in those are famous for dieing.

Dec 22, 2016 | ATVs

1 Answer

My 50cc quad bike wont start, the carby is clean and it has lots of spark but it wont start, can you help me.


Hi, Kevin and the usual suspects are:
1. Fuel tank empty.
2. Fuel supply valve/petcock turned off.
3. Fouled spark plugs.
4. Engine flooded as a result of overuse of the enricher.
5. Vacuum hose to the fuel supply valve/petcock disconnected, broken, cracked, or pinched.
6. Fuel valve/petcock or filter clogged.
7. Severely discharged or damaged battery, you need 12.5 volts or better and be able to pass a load test if necessary.
8. Check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
9. Loose or corroded wire connection at the coil, battery or plug between ignition sensor and module.
10.. Spark plug cables in bad condition and shorting, cable connections loose, or connected to the wrong cylinders.
11. Ignition timing incorrect due to a faulty ignition coil, ignition module or sensors (MAP, CMP, CKP, O2, TPS, ETP, IAC,or BAS).
12. Faulty neutral, clutch lever, or kickstand safety switch.
13. Faulty fuel pump or fuse or relay.
14. Tilt sensor needs a reset.
15. Security system not disarming alarm needs a reset.
For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
Repairing China ATVs Starting Problems
ATV Connection
Kasea 50cc won start engin turns but no firing at all Off Road Forums...
troubleshooting china 110cc quad that will not start part 1

Jun 01, 2016 | Motorcycles

1 Answer

Suzuki lt50 manual


have you tried starting with the air intake pipe/hose removed from the carb ? if still wont start i'd strip carb down and clean out the jets , not forgetting the idle jet at bottom of bowl , also check the diaphram pump is in working order , rubber diaphram still flexable not holed etckeep me posted if you wish

May 26, 2014 | Cars & Trucks

1 Answer

1994 Nissan v6 4x4 king cab fuel gauge wont work but fuel pump works. What can I do to fix this?


see if you might have a bad ground on the gas tank where wires hook up to the top of gas tank. I don't know if you can reach up and move the wires around from side to side could have a bad connection. might have to let the gas tank down. have you tried to check your fuses first. if you find one for the fuel gauge pull it out look at real good make sure it is not burnt across inside by looking at the fuse what I usually do if you have another good fuse same amp is try a different fuse just to be sure.i use to work on cars a lot but had surgery on my back so from work history of 30 plus years of knowledge I hope I can help others. I hope this works let me know if this helps. you also might try to wiggle the wires around on the back of fuel gauge. you may also have a bad gas gauge but try what I said to try first. god bless

Mar 30, 2012 | 1994 Nissan King Cab

2 Answers

Eninge wont start unless petrol is tipped down carby. carby is a rochester quadrajet with auto choke .


might have to put a carby kit through it, the jets might be blocked thats what it sounds like. when you poor it in the fuel and air gets in straight away but if the jets are blocked you wont get the fuel through. try carby cleaner, use the accelrator cable on the side of the carby to rev it right up while spraying in carby cleaner car will try die out then let off the accelerator. basically you have to clean your carby out

Jun 21, 2010 | 1983 Chevrolet Camaro

3 Answers

When i try to start my bike up it wont go, just wont fire, checked everything it has spark ect...some days it will go fine, but other days it wont, when i get it going it runs fine, if i turn it off and...


check the air filter if its clean take the carb apart and clean it with something like b-12 or i use wd-40 on my bike so it wont eat the rubber gaskets

Jun 09, 2010 | 1991 kawasaki ZXR 750

1 Answer

My car wont start, my dad says it may be the fuel pump, how do i tell?


Get under the rear end of car with a test light and fit the clip to the clean part of the chassis and test the wires to the pump (going into the pump)
1 should light up ..
THEN go to the fuel rail or carby if carby type and take off the feed pipe and get someone to turn on the key and the fuel should come out of the pipe ,,so then you know you have a problem in the pump if no fuel comes out or the carby or fuel rail if it does come out ...
Ron

Nov 22, 2009 | 1994 Ford Thunderbird

1 Answer

49cc mini pocket quad wont start


if it has a kill switch make sure it is on, check that you are getting spark at the plug and have the right fuel in the motor.
Remove the air filter from the carbi and squirt some 2 stroke fuel directly into the throat of the carbi and try to start it.
hope this helps

May 19, 2009 | RTO Mini Quads

Not finding what you are looking for?
1994 Suzuki DR 350 S Logo

426 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

4536 Answers

Richard
Richard

Level 2 Expert

83 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...