Question about 2005 Hyosung GT 250

1 Answer

2008 hyosung wont start

My 2008 hyosung gt250r wont start with the swicth i can only push start it now. all lights and horn work with no problem.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,030 Answers

I am assuming you mean with the starter button.

If thats the case check that you have power to the button, and if so powewr coming out of the button.

If all is good this far, check the starter solenoid and starter for operation.

try taking 12v directly to the starter and see what happens..if it turns then the problem is before the starter.

Posted on Sep 11, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi mate my Hyosung gt250r 2008, it starts fine then when I go to drop I in to gear it will just stall and, the other day it kept stalling no matter what gear, I cut the kickstand sencer still wont go


You need to connect the two wires coming from the loom to the sensor. If you actually 'cut' the cable it should be easy. Make sure you connect the wires coming from the loom, not the sensor.

May 12, 2015 | Hyosung Motorcycles

1 Answer

Hyosung gt250r commet service manual


order from dealer or online from hyosung

May 14, 2014 | 2008 Hyosung Comet GT250R

1 Answer

08 hyosung gt250r starting issue


Hi, Ron and the usual suspects are:
1. Ignition Switch not in the "ON" position.
2. Engine Run Switch in the "OFF" position.
3. Discharged battery, needs to be 12.5 volts or better and be able to pass a "LOAD" test if necessary.
4. Check the battery terminals for damage or corrosion check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
5. Tip over sensor needs a reset.
6. Faulty ignition switch.
7. Faulty starter button.
8. Faulty kickstand or clutch pull in switch/sensor.
9. Starter control circuit, relay, or solenoid faulty.
10. Main fuse or circuit breaker may be blown or faulty.
11. Check for engine trouble codes.
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
https://www.perthstreetbikes.com/forum/showthread.php?t=140128
Hyosung GT250R not starting
HYOSUNG COMET 125 Service Manual
http://www.alpha-sports.com/hyosung_parts.htm
http://www.hyosung.com.au/downloads/manuals/GT250.pdf

Mar 15, 2017 | 2008 Hyosung GT250R

1 Answer

2008 Hyosung GT250R will not turn over


Hi, Mcle_cool before testing any electrical component in the Starting System it is "IMPERATIVE" that you have a fully charged battery of 12.5 volts or more and be able to pass a proper "LOAD" test if necessary, you may have a preliminary reading of 12.5 volts or more but little or zero amperage, the battery is faulty and must be replaced. AGM type batteries fall into this scenario more so than lead acid batteries.
1. Ignition Switch not in the "ON" position.
2. Engine Run Switch in the "OFF" position.
3. Check the battery terminals for damage or corrosion check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter.
4. Bank angle sensor needs a reset or is faulty.
5. FOB battery low or dead.
6. Faulty ignition switch.
7. Faulty starter button.
8. Faulty kickstand or clutch pull in switch/sensor.
9. Security alarm needs a reset.
10. Starter relay, solenoid, starter have failed or circuit wiring faulty.
11. Starter armature or field coils have failed.
12. Main fuse or circuit breaker may be blown or faulty.
13. The electric starter is working but starter clutch has failed.
14. Check for engine trouble codes.
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
https://www.perthstreetbikes.com/forum/showthread.php?t=140128
Hyosung GT250R not starting
HYOSUNG COMET 125 Service Manual
https://www.pdf-archive.com/2015/08/16/manual-reparaci-n-gt250ri/manual-reparaci-n-gt250ri.pdf
https://www.alpha-sports.com/Parts/H_GT250R.htm
HYOSUNG GT 125 Manual

May 23, 2017 | 2008 Hyosung GT250R

1 Answer

I haven't started my bike in almost 1 year. The starter does not even turn engine. I replaced battery and lights work. No noise at all when I press starter.


i have a 2007 gt250r and had a similar problem, on the right side beside the battery between the fairing and the frame is the starter solenoid, you can test it with a test light by putting the clamp of the test light on one side then the light on the other side, hit the starter button if the light doesnt come on it is the solenoid, about $50 off ebay

Aug 10, 2011 | 2008 Hyosung GT250R

1 Answer

I have a leaking pet **** on my 2008 hyosung gt250r, how can i fix this leak?


Make shure its not the sending unit under the tank it easy to miss MOPAR KENNY

May 22, 2011 | 2008 Hyosung GT250R

1 Answer

My 2008 hyosung gt250r will not start but i can push it off and it works great and shifts fine and the lights go dim when the bike is not running and the brake light and head lights work but the blinkers...


short in wiring or switch causing battery discharge. charge battery to full charge . see if everything works right. ifturn lights
still dont work, un hook switch to turn signals . wait for the next
day and see if your battery has held charge . should read 12v
or 11.5v . if battery stays up switch maybe shorting out. check wiring for chaffing

Oct 21, 2010 | 2005 Hyosung GT 250

2 Answers

I have a carburated 2008 hyosung gt250r that cant start!!!!


I would say the clicking is not the battery but next to or above it is a starting relay which from your discription has gone out. You can locate it by following the large red wire comimg from the battery. The soleniod can be tested by jumpering from one side of the soleniod to the orthersid use a pair of needle nose pliers. If it turns over its diffinitly the culpert. Just change it out and ride on. They use a low amperage coil to close this larger load of the starter circuit.

Jul 15, 2010 | 2005 Hyosung GT 250

2 Answers

My 2008 hyosung gt250r doesnt start, all light and horn works. any solutions


does it crank over?....if so check spark...fuel...etc...try to narrow it down to a actual problem such as carbs clogged, or injector not working, other than wont start, not able to tell much from that.

Sep 11, 2009 | 2005 Hyosung GT 250

Not finding what you are looking for?
2005 Hyosung GT 250 Logo

Related Topics:

626 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyosung Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Are you a Hyosung Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...