Question about Yamaha FJ 1100 Motorcycles

1 Answer

Yamaha fj1200 3XW. ABS LIGHT FLASHING ABS WORKING ON REAR OK,WILL IT BE THE SENSOR.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,509 Answers

Most of the time ABS problems are with sensers but which one? The master cylinder has a fluid level that sticks low evewn if theres enought fluid so makw sure it flates up in the fluild if the light stays on them check the wires and the plugs that plug in the wheel speed sensers as the sensers seldom fail but the wires abd plugs get into troble. Follow the wires from the sensers to the ABS controller and reconnect them and inspect all the covering and wires for troble. Most two wire sensers will have some continuity with an OHM meter but it will be high. If you meter has wave form then put in on one wire to ground with everything connected and turn the wheel and you should see pulse and its a yes or no answer. If the wires and the sensers check out and the levels senser can be proven to work you best let someone with access to the Yamaha dianostic equipment to look at it. Rember that an open brake line or an unbleed brake line will also make the light come on.. Unplug the ABS controller only with the key off and the battery unhooked as these parts are easlily damaged by spickes in power or a low or bad battery. Once all inspections are made and the battery connections cleaned and reconnecdted try again as you may have cleaned something up and it's making now and the system may work just fine

Posted on Sep 10, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1998 dodge Dakota Ok so I just got this truck and when I got it the abs light and brake light were on plus the speedo doesn't work sometimes I replaced the rear speed sense on the diff but the lights...


If the red brake light and the ABS light are both lit up on the dashboard, do NOT drive the vehicle. It indicates a major malfuntion with the brake system. The red light indicates low brake fluid or the parking brake engaged. The yellow ABS without the red light, indicates a problem the computer found and it disables the ABS system while still having conventional brakes. Since both are lit, it needs the brake system repaired. What you replaced on the rear diff was probably the rear ABS sensor. The vehicle speed sensor for the speedometer should be located on the rear of your transfer case if you have 4WD, or on the rear of the trans if you have 2WD.

Oct 11, 2012 | Cars & Trucks

1 Answer

Sometimes the abs light is flashing and the abs is not work some other times its ok..is it any bud electric touch ?(i have a yamaha fjr 1300 abs 2005)


Hi, Andreas for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Yamaha, despair not, for a mere zero $ you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
ABS Light blinking Technical Discussions
ABS Light Flashing
Yamaha FJR1300R Service Manual
OEM parts for Yamaha
Yamaha FJR1300R Owner Manual

May 19, 2012 | 2005 Yamaha FJR 1300

1 Answer

I have a 2005 Yamaha FJR1300a....recently the abs light started flashing...what does that mean?


ABS flashing means not working - The Back-up will trigger the ABS every time it blinks - Remove back-up and test.

Jun 29, 2011 | 2005 Yamaha FJR 1300

1 Answer

Speedo suddenly not working and two warning lights appeared on dashboard one being ABS light warning light.


If the ABS (and likely the traction control) light came on at the same time that the speedometer stopped working, you likely have a faulty wheel speed sensor at the right rear wheel. You can test this by swapping the two rear wheel speed sensors (ABS sensors). If the speedometer then works (but the ABS & Traction control lights stay on), replace the sensor that is now at the left rear (was at the right rear). If no change, you may have a fault in the ABS & Traction control - control unit.

Rear wheel speed sensor at www.bavauto.com

http://www.bavauto.com/shop.asp?HC1=0&Htarget=search.asp&HCY=2001&HCM=330i&SearchStr=rear%20abs%20sensor

Nov 22, 2009 | 2001 BMW 330

2 Answers

Flashing ABS light


i have a 58 plate fjr 1300
just put new tyre on rear.......NOW my ABS warning light is flashing.
can anyone help please
regards muttley

Oct 08, 2009 | 2005 Yamaha FJR 1300

2 Answers

1997 ford f-150 flashing abs light (flashes 15 times then stops solid and then flashes again 15 times) rear brakes shoes are at 50% no broken parts inside drum area. did notice that somtimes i would come...


Does your speedometer work ok? There is a sensor on top of your rear differential that provides a signal to both the abs and the computer(speedometer uses the signal from the computer) This sensor goes out pretty common.

Jun 08, 2009 | 1999 Ford F150 Regular Cab

1 Answer

ABS LIGHT COMES ON SPORATICALLY, BRAKES DONE, ABS OK


I had this problem.
When they test the ABS with the car not running the ABS was OK.
When the take the car for a drive still hook up to the tester, they find that one of the wheel sensor was bad.
I replaced it and every thing was OK.

Mar 14, 2009 | 1997 Dodge Caravan

1 Answer

2004 focus brake & ABS light on


Ok the reason I ask is that will help to pinpoint the concern. See ABS system when you first turn the ignition on will do a self test on itself,light turns on for a few seconds then turns off if everything proves out. Then when you start driving once you reach about 12 mph it will activate the pump and perform a 2nd self test.If everything is ok light stays off,if it see's a problem it turns on the light and disables the ABS.
Since yours comes on after you start driving then problem is most likely a wheel speed sensor concern. Since you just did a rear brake job and the problem started after this I would say it is one of the rear sensors.You need to look at the sensors and make sure the sensor and ring look ok and that you didn't get grease or dirt in the teeth of the sensor ring or maybe bent the end of one of the sensors and make the gap larger between sensor and ring.

Feb 20, 2009 | 2004 Ford Focus

2 Answers

Abs brake light always on


Sounds like this could be a front or rear wheel sensor. You need to check the trouble code by placing a wire short across the test connector located under the dash near the radio center console. This is a blue, two pin connector plugged into a holder. placing a short wire across the two termnals and turning the key on to the II On Position will start the ABS light flashing. Do nt start the engine, just turn the key switch on.

Count the number of flashes. The first group of flashes followed by the next group of flashes. For example, four (4) flashes followed by the next group of eight (8) flashes points to the left driver side rear wheel speed sensor. check the resistance (continuity) with a meter. It should read about 1240 ohms. A resistance of 0 -100 ohms is a bad sensor. Cost of a sensor is about $126 but it is not easy to install since the old one usually is hard to remove.

Bottom line is that the ABS system probably does not work properly because the light is on. The regular brakes are OK.

Oct 12, 2008 | 1996 Honda Odyssey

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

982 people viewed this question

Ask a Question

Usually answered in minutes!

Top Yamaha Experts

dhnguyen

Level 2 Expert

281 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1144 Answers

Tony

Level 3 Expert

2600 Answers

Are you a Yamaha Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...