Question about 1996 kawasaki ZX-6R Ninja

2 Answers

1996 zx6r I know this sounds ridiculouse but i can`t figure out how to take out my light bulb in the front and also i am looking for the rear fairings for my bike thanks

Posted by on


2 Answers

  • Level 1:

    An expert who has achieved level 1.


    An expert whose answer got voted for 2 times.

  • Contributor
  • 3 Answers

Actually u can reach in and just pull the 3 prong connector right off of the bulb.Then pull off the rubber cover with the tab that is at the top of the circular rubber cover. The bulb is held in by a small wire that hooks on both sides. Replace the bulb and reverse the steps.There is no need to remove any fairings to replace the bulb.

Posted on Mar 21, 2010

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert who has answered 20 questions.


    An expert that has over 10 points.


    An expert whose answer got voted for 2 times.

  • Expert
  • 93 Answers

You have to remove the front fairing in order to change a bulb, strenuous work i know ( I own one ;-) )

Posted on Sep 10, 2009

Testimonial: "thanks a lot!"

  • Michael Miller
    Michael Miller Oct 01, 2014

    You do not need to take off any fairings.



1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

1996 no tail lights

not much to go on here, but check the fuse. and the bulbs. does your dash lights illuminate or is it just the rear lights that are out? If none of the parking lights come on (front, rear,+dash) I would look at the headlight switch.

Jun 11, 2014 | 1996 Jeep Grand Cherokee

1 Answer

How to replace the light bulb in the Maytag french door bottom freezer

Hopefully you have figured this out. Its fairly simple to do. If your freezer if full you will need to empty enough that you can place your hand in and on the Plastic Light cover. Its in the center at the top of the freezer. This cover is removed by simply applying a little pressure to the right and left corner and pulling toward you and down. The light cover with very little pressure should mover and pull down. Once it begins to lower in the back just keep a hold of it and mover your hand toward the rear of the freezer and the front tabs will slide out.
After changing the light bulb, simply put the front two tabs of the front of the cover in first and snap back into place by pushing up. Takes about 3 minutes to change the light bulb. Good Luck!

Dec 24, 2012 | Maytag MFD2560HES Bottom Freezer French...

1 Answer

Have a short in my 1996 nissan sentra gxe my taillights stay on but when I hit the breaks the right break light goes completely . I mess with the wires and it starts to come on when i move it a little bit...

take outr the right brake light bulb and see if all the other lights start working. if so look at the bottom of the bulb and the socket it goes into and see if it looks the same as the left side. sound slike you have a bulb that has the 2 nips on the bottom out it melted. togher. or the bulb is just shortled

Jul 13, 2011 | 1996 Nissan Sentra

1 Answer

1996 e 350 winnebago rv left rear signal and brake no power to bulb and front bulbs flash very fast

fast flashing usually indicates a burned bulb-but if your bulb good and no power at the light- can mean a wire is broken -does your winne have a trailer light hook up- start there and work back toward tail light looking for the break in the wires= good luck

Jun 20, 2011 | Ford E-350 Cars & Trucks

1 Answer


another magic relay with fairy dust ,it does not have a relay for the side lights ,their is a fuse for each side of the side lights ,not front and rear so if both side lights on for the rear then its picking up a stray feed somewhere ,and if it is then this is a painstaking job to find and it might be quicker to rewire ,remember that both sides have seperate fuses so i would have expected it throw the front lights on as well so check the bulbs their as well

Jul 30, 2010 | 1996 Honda Accord

1 Answer

What brake pads etc and disks do i need for my bike. ZX6R Ninja (1996) (P).

These are the part numbers from Kawasaki

Front brake pads, you will need 2 sets 43082-1142

The front rotors have been canceled, I will give you the part number 41080-1398-5C

Rear brake pads 43082-1171

The rear rear is also canceled part number 41080-1389-FB

Apr 29, 2010 | 1996 kawasaki ZX-6R Ninja

3 Answers

My 1996 buick regal brake lights wont work when i press them only the small window light gos on and when i press my emergencie flashers will only work in front side i can still use my turning signals and...

if all the fuses are good check the wiring harness at the back check if there,s a power coming out on it, you can use a tester for the continuity of the power output, or you can also use a test bulb to check them all. if it not working then the problem is wiring harness locate the worn out wires... have a good day..

Apr 30, 2009 | 1996 Buick Regal Olympic Gold

2 Answers

Chevrolet cavalier

Use a test light or a volt meter and make sure that there is power going to the brake light... Then check your ground for the same

Feb 28, 2009 | 1996 Chevrolet Cavalier

Not finding what you are looking for?
1996 kawasaki ZX-6R Ninja Logo

Related Topics:

516 people viewed this question

Ask a Question

Usually answered in minutes!

Top kawasaki Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4536 Answers


Level 3 Expert

77169 Answers


Level 2 Expert

342 Answers

Are you a kawasaki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides