Question about 1985 Honda XR 250 R

1 Answer

1983 Honda XR 350 - Reattaching the exhaust pipe w/ flanges.

1983 Honda XR 350 - I pulled the exhaust pipe off a twin exhaust xr 350 and cant remember which way the 4 half circle spacers go on the locking flanges. They seem to be too loose whichever way I turn them around.

Posted by on

  • stephen smith Feb 07, 2012

    on my 85 xr 350 the spacers go on the in side against the pipe but the bracket that holds the pipe the on only does up one way turn spin them around

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Mentor:

    An expert who has written 3 tips or uploaded 2 video tips.

  • Expert
  • 146 Answers

I cant quite figure out which spacers you are refering to. The only thing I can think to suggest is the exhaust schematic on bikebandit.com. If I knew for sure I could try to look at my bike but there's no telling what previous owners could have done. Sorry. I'd really like to help.

Posted on Feb 19, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1996 Honda XR 250 R fuel line routing


Hi, Anonymous for this scenario you will need your service, parts fiche, and owners manual if you can't find the best tool you ever bought for your Honda, despair not, for a mere zero $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need for viewing and printing please click on the blue links below. Good luck and have a wonderful day.
1996 Honda XR 250 fuel line routing Google Search
Honda XR250 XR250R carburettor fuel drain pipe
Honda XR250R Service Manual
http://www.partsfish.com/page/oem-parts-for-honda
Honda XR250R Owner Manual

Jun 07, 2014 | 1996 Honda XR 250 R

1 Answer

Will xr 250 pipes fit a xr 350


The 1985 XT250 has one exhaust port so its header is a single pipe.On the other hand the 1985 XT350 has two exhaust ports and double header pipe.I don't think you can fit either one.

Feb 05, 2012 | Motorcycles

1 Answer

I am trying to replace the fork seals on my 2001 Xr 200 honda and i cant get at the stupid seals. how do u seperate the 2 peice's of pipe/forks after the springs are out. the stupid manual says you pull...


I always change the seals without taking the sliders out of the bottom legs.
If you look at the bottom you will see a bolt that holds the two together

Feb 10, 2011 | 2001 Honda XR 250 R

1 Answer

What kind of horsepower increase will an FMF power core 4 exhaust give me and what kind of sound will it give me for an XR100R


FMF are great pipes, and a fantastic addition to any motorcycle. For the XR, you could expect a few more horse power, and you will notice a lot more tourqe around mid throttle. The sound will be awesome!

Jun 13, 2010 | 2002 Honda XR 200

2 Answers

Honda xr 125 to set tappet clearances and adjust timing chain 03 model thanks


timing chain should be auto adjust. set valve clearence to inlet 4 thou, exhaust 6 thou

May 18, 2010 | 1983 Honda XL 125 R

2 Answers

I have a 1984 honda xr 350 and i've changed the spark plug, pulled out the carbs and cleaned them, and changed the airfilter. I still can't get it to kickstart no matter how long i try. its getting gas and...


Those bikes can be a pain to start after they've sat awhile. What always worked for me was twist the throttle a bunch. I mean make sure its flooded. Then lay the bike over on its left side until the gas runs out the overflow. Stand it up and lay it down until it stops running out. Then I squeeze the decompression lever and cycle the motor. Now just barely pull on the decompression lever to open the valve just barely. Get it to top dead center and give her a good kick with a twist of the throttle. Becareful it could kick back.
This technique works for when the bike stalls when its hot. Most important part is if you think its flooded lay it over and start the process over. Remember your XR has two carbs and will flood QUICK. After some practice you'll be able to hear it in the exhaust pipe if she's flooded or if she trying to come around. Trust me. I have four of these bikes. Two 83's, one 84 and my beloved 85.

Jan 27, 2010 | 1985 Honda XR 250 R

1 Answer

I recently bought a honda trx 350 fm quad when i start it it only runs on the choke , then the exhuast pipe after a while heats up (glowing ) any ideas pete.


The pipe glows because of the extra fuel from the choke. (four strokes do this) Look closer into the carburator for a blocked passage, or junk in a jet. Clean it out thoroughly!!!

Nov 10, 2009 | 2002 Honda XR 650 R

1 Answer

Theres alot of smoke coming out the exhaust pipe


Sounds like the crank case engine oil level is too high. Ovefilled, Two or 4 stroke?

Jun 05, 2009 | 2002 Honda XR 200

Not finding what you are looking for?
1985 Honda XR 250 R Logo

Related Topics:

485 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

yadayada
yadayada

Level 3 Expert

75117 Answers

Gino Cussen
Gino Cussen

Level 2 Expert

216 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...