Question about 2001 Honda CBR 929 RR Fireblade

1 Answer

I have a 2000 CBR929RR and just recently the oil light started coming on for no particular reason! At start up it blinks on and off several times goes out and then comes on and stays on! I added about a half a quart of oil ( it was just a tad low when looking through the sight glass)! The oil light went out for a few minutes then came back on and stays on although it still blinks on and off at and shortly after startup! It's the only problem I have ever had with the bike! It currently has about 18,000 miles on it! I use Mobile 1 Synthetic oil. Any help would be greatly appreciated!

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert whose answer got voted for 500 times.

  • Master
  • 1,167 Answers

Hi buddy what is the oil level roughly at when running. on stand still it should be 1/2-3/4 full on sight glass if the oil appears to be ok you have a faulty sensor or is this light the low oil pressure light get back to me buddy

Posted on Sep 08, 2009

  • todd
    todd Oct 28, 2013

    i dont about your oil light, but i do know that you're not supposed to use synthetic oil, 10w40 conventional is recomended.



1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Recently bout three months my engine oil light

When an engine oil light comes on, this is the 911 call to you that your engine is having an emergency in that there is not enough oil to lubricate the moving parts of the motor that keep it operating. Those knocking noises that you heard were the dying breath of your once dependable Ford engine; which is now junk. Because you "didn't have the time to pick up oil", you will now have to find the time to either replace or completely rebuild the engine. The Expedition has a V-8 so expect to pay at least $3500 for a new motor.

Oct 06, 2014 | 2000 Ford Expedition

1 Answer

One xenon under counter light is flashing

That particular lamp may be failing.

Jan 25, 2014 | Kichler Lighting Home

2 Answers

How to reset oil warning light on a chevy trailblazer ls 2006

The way to reset the oil light on your Trailblazer is.You first turn the key on but do not start the vehicle.Press the gas pedal 3 times all the way to the floor within 5 seconds.The change oil light will flash several time then go out.The oil life has been reset.Remember don`t start the vehicle just key on engine off.Hope this helps.Good luck.

Dec 09, 2011 | 2006 Chevrolet Trailblazer

1 Answer

2000 flstc engine light comes on after start up

Has your battery gone dead recently? There are several things that can set an engine fault code and honestly due to that Id say take it to your local dealership and ask them to flash the codes for you, most of them will do this for free as it only takes a minute to walk out and hook up with the tool to do that. In some cases all it takes is for the motor to not start one time properly and you'll get a misfire code that simply means it was out of cycle when it fired the cylinder and as long as the bike is running fine, Im guessing that is what you had, however be sure get the codes flashed. Good luck

May 28, 2010 | 2000 Harley Davidson FXD Dyna Super Glide

2 Answers

Can't get the Change oil light off

Turn the key to the on position and press the gas peddle down to the floor 3 times within 5 seconds,then wait 10 seconds. Turn the key off then start the car,the light will be off :)

Aug 28, 2009 | 2000 Pontiac Grand Am GT

1 Answer

Blue coolant light flashing beetle 2000

i have a 2003 vw beetle turbo. The oil light blinks even after a recent oil change.

Apr 09, 2009 | 2003 Volkswagen Beetle TDI

2 Answers

Problem with Transmission?

the blinking light indicates that the engine has a ignition miss in one of the cylinders.

Apr 08, 2009 | 1997 Mercury Villager

1 Answer


in some newer cars, they have light that blink like this to tell you that you need an oil change. they are just set on a timer to go off every 3500-5500 miles or it could be a malfuctioning oil pressure sensor. either way its a eawsy fix. take the car to a oil change shop to have them verify which one.

Jan 02, 2009 | 2000 Volkswagen Beetle

Not finding what you are looking for?
2001 Honda CBR 929 RR Fireblade Logo

351 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4821 Answers


Level 3 Expert

79024 Answers


Level 2 Expert

342 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides