Question about 2006 kawasaki Z 1000

1 Answer

2006 Kawasaki Z1000 fuel pump not working.

Hi,
2006 Kawasaki Z1000 fuel pump not working. How to check if it is the pump or pump relay?
Cheers, Rob

Posted by on

  • Anonymous Mar 12, 2014

    no spark no fuel pump prime
    I check fuel pump works, relays working.
    the only problem I notice is that there is 7 volts at the yelow/red wire from the fuel pump relay, with or without the relay conected.

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 778 Answers

With the ignition on, use a test light to see if power is getting to the pump. If there is power to the pump, then the relay is doing it's job and you may eliminate it as the problem and look at the pump for the solution. If no power to the pump, check to see if the relay is receiving power, if it is and not relaying it to the fuel pump, the relay would appear to be at fault. And so on.....

Posted on Sep 08, 2009

Testimonial: "Thanks mate. The assistance was just what I needed. Cheers, Rob"

  • Frank  Fernandez
    Frank Fernandez Sep 12, 2009

    You're very welcome Rob, and thanks for the excellent rating and testimonial!

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My kawasaki z1000 2003 does not want to rev starts and idels beautifully but when i get to about 4000rpm it doesnt pick up revs ... can anyone give me some advice on what i can look for.


Hi, Wessel and the usual suspects are:
1. Spark plugs in bad condition or partially fouled.
2. Spark plug cables in bad condition and leaking check for spark leakage in the dark.
3. Spark plug gap too close or too wide.
4. Faulty ignition coil, module, and or sensor.
5. Battery nearly discharged.
6. Check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
7. Intermittent short circuit due to damaged wire insulation.
8. Intake air leak.
9. Water, dirt, or rust in the fuel system, fuel pump and/or filter.
10. Old dead or bad fuel.
11. Faulty fuel pressure regulator
12. Pinholes in the in tank plastic convoluted tubing from the pressure regulator to the quick disconnect check valve.
13. Fuel tank vent system plugged.
14. Throttle body controls misadjusted.
15. Damaged throttle body or intake seals.
16. Loose, dirty, or corroded ignition module connector at crankcase.
17. Faulty MAP, CKP, O2, and/or CMP sensors.
18. Incorrect valve timing.
19. Weak or broken valve springs.
20. Damaged intake or exhaust valve.
21. Check for engine trouble codes.
22. Clogged air filter.
For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have nice a day.
03 Z1000 won rev beyond 5k rpm
https://zzrbikes.com/threads/60968-HELP!!-ZZR1200-wont-rev-over-3000-rpm
Kawasaki Z1000 Service Manual
OEM Parts for Kawasaki
Kawasaki Z1000 ABS Owner Manual

Oct 27, 2016 | 2003 kawasaki Z 1000

1 Answer

What colour is my Kawasaki z1000 j1


Hi, Mark for this situation I would call my local dealer or reputable shop's service/parts department and inquire about any possible quick fix, answers, or parts inquiry. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
Kawasaki Motorcycle Paint ColorRite
Thread KAWASAKI PAINT CODES REVEALED
Bike manufacturers paint code
Kawasaki Z1000 Service Manual
Kawasaki Z1000 ABS Owner Manual

Sep 05, 2016 | kawasaki Z 1000 Motorcycles

1 Answer

Kawasaki z1000 2010 won't start


Shorting the pump out will not help at all all that is doing is turning the pump on what you need to do is buy a replacment key from your dealer take the engine,vin number and receipt of purchase to your nearest dealer and thay will help you as with out the right sercrity key this bike will not start

Apr 07, 2014 | 2008 kawasaki Z 1000

1 Answer

2007 z1000 turn signals not working from switch but do flash with alarm


Hi, have you checked the fuse for the direction indicators, the alarm is a separate supply, other things may include a faulty switch or a flasher relay

Feb 21, 2011 | 2007 kawasaki Z 1000

1 Answer

2004 Kawasaki z1000 will not start


Hi, Artis23manni and the usual suspects are:
1. Fuel tank empty.
2. The fuel tank has old dead gas.
3. Fuel tank bottom contaminated with ethanol sludge, dirt, water, rust, etc.
4. Fuel supply valve/petcock turned off.
5. Fouled spark plugs.
6. Engine flooded as a result of overuse of the enrichner.
7. Vacuum hose to the fuel supply valve/petcock disconnected, broken, cracked, or pinched.
8. Fuel valve/petcock or filter clogged.
9. Fuel line to carburetor or throttle body pinched, kinked or blocked.
10. Carburetor float stuck.
11. Fuel injectors clogged.
12. Fuel injectors stuck open.
13. Severely discharged or a damaged battery should have 12.5 volts or more and be able to pass a proper "LOAD" test if necessary, you may have a cursory reading of 12.5 volts or more but little or zero amperage the battery is faulty and must be replaced, AGM batteries fail in this scenario more so than lead acid batteries.
14. Check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
15. Loose or corroded wire connection at the coil or plug between ignition sensor and ECM module.
16. Spark plug cables in bad condition and shorting check for spark leakage in the dark, cable connections loose, or connected to the wrong cylinders.
17. Ignition timing incorrect due to a faulty ignition coil, ignition module or MAP, CMP, CKP, O2, TPS, ETP, IAC sensors.
18. Faulty neutral, clutch lever, or kickstand safety switch.
19. Faulty fuel pump or fuse or relay.
20. A stuck bent or burnt valve.
21. Tilt sensor needs a reset.
22. Security system not disarming alarm needs a reset.
23. Check for engine trouble codes.
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
2005 z1000 won start
What to do When Your Motorcycle Won Start
Kawasaki Z1000 Service Manual
OEM Parts for Kawasaki
Kawasaki Z1000 ABS Owner Manual

May 17, 2017 | 2005 kawasaki Z 1000

1 Answer

Kawasaki z1000 wont start and the f1 light flashes


The flashing FI is telling you that the Fuel Injection computer has detected a problem in the system. Some problems are minor (dirty air filter) and the computer will still allow the bike to run. Some problems are major (plugged up injectors) and the computer will not allow the engine to start. You will need to have a dealer check the computer diagnostic reading to find out where the problem is.
Can I get a “very helpful” rating on this answer?

Aug 23, 2009 | 2005 kawasaki Z 1000

1 Answer

No power to fuel pump


there is a relay check that
Cheers rob

Aug 16, 2009 | 2000 Mitsubishi Eclipse

1 Answer

2000 elantra no power to fuel pump.


could be a bad earth or [ground]
the power wire ma be brocken or have a loose or dirty connection
you neeed to trace it along its lenght to determine the fault!
so start at the pump & work back
Cheers rob

Jul 03, 2009 | 2000 Hyundai Elantra

Not finding what you are looking for?
2006 kawasaki Z 1000 Logo

Related Topics:

723 people viewed this question

Ask a Question

Usually answered in minutes!

Top kawasaki Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4525 Answers

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a kawasaki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...