Question about 2002 Honda NX4 Falcon

1 Answer

I've been ask to put some meat in the oven but dont know how to switch the oven on, I can turn the knob and smear the gas and i can locate the switch underneath as well but not sure how to? I have tried to turn the knob a bit and press the switch once but nothing is happening?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 104 Answers

Turn on the gas knob. Light a match and hold it above the burner at the back. Press the switch inside the oven at the front of the base and hold it in. The burner should light and after about five seconds you can release the bottom switch and the oven should stay alight.

Posted on Sep 06, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My becko gas cooker is new and when i turn the oven on the hob ignitors keep clicking what do i do pls


So when you are turning the oven on, It is the same process as your cooktop. you turn the knob to ignite( so its clicking) and once it catches fire you back off the knob to adjust your flame. the oven is the same. its just bthat all your igniters will want to light at the same time, but gas is only being fed to the location of whatever knob your turning. omnce oven is lit, turn back the knob to dedired temp setting. hope that amsers your question. good luck. Or, if no gas is getting to the location, make sure the valve for your gas is on.

Jun 20, 2015 | Kitchen Ranges

1 Answer

Char Broil Gas BBQ Knobs just spin, no propane coming out.


Just a wild guess but I think on a Char Broil you have to push in the knob and turn it to the setting.

Feb 24, 2013 | Grilling

1 Answer

I have a Viking vgic365-4G gas range. I recently replaced the spark module, the ignitors for the oven and the griddle, and the spark ignitors for the burners. The problem I am having is only one of the...


Hello,

their is one of two things causing that,

1) the switch that supplies power to the spark module when the burner is turned on is bad...its located on the shaft of the burner valve thier is one switch for each knob so counting the oven and the burners their is 5 (the oven is different from the surface burners) to check those switches what needs to be done is remove the knobs then the face panel so ya can get to the knobs.

No is where is gets a bit complcated if ya dont follow all procedures....the knob must turned on to check so gas will be flowing and ya must light the gas using a match or raw gas will eneter the kitchen...or if possible temporarly turn off gas supply to the unit.also POWER MUST BE DISCONNECTED and then with power off and the burner lit manually once turned on ya would need to check each switch to have continuity,if any of the switches does not have continuity when measured with a ohm meter that switch will be bad


2) the igniter is cracked so power is coming from spark module yet since its cracked power is jumping out before it gets the where it lights the burners.



GENE

Oct 02, 2011 | Viking VGIC365-4G Gas Range

2 Answers

Need to adjust oven temperature on a Croley gas range


you shouldnt need to adjust the burners for a temp problem.
the control has a built in calibration setting and it should be described in your owners manual.
if you dont have the manual, then try to set the oven temp to max, 550, and then hold the bake button in for 10 to 30 seconds. after that it should beep and show you a 2 digit number like 00. that is the calibration mode, then you can adjust it up or down +/- 35 degrees. try to make a small adjustment first like 10 degrees and see how it bakes.
if it takes too long to bake, then use + degrees, if it is burning things then lower -10 degrees.
hope that helps you.


Jan 03, 2010 | Crosley CE35100AA Electric Kitchen Range

2 Answers

Old (30 yrs?) tappan gas range.loose oven knob


remove top of range, locate shaft from knob that is loose, there should be a nut where shaft goes into valve, tighten nut in small steps

Sep 17, 2009 | Tappan TGF320 Gas Kitchen Range

1 Answer

Doesn't get as hot as it should


the range has two thermostats one for each oven located under the oven knobs. put a meat thermometer in the oven and adjust the thermostat screw with a small flat screwdriver untill the oven turns off at the correct knob temp.
registered on the thermometer.
then adjust the knob screw on the back of the knob to match that temp setting.
clockwise is hotter counterclockwise is cooler

Apr 21, 2009 | Ovens

1 Answer

Gas ove will not stay lighting


Hi there you need to change the ffd on your oven FFd stands for flame faliure device. its like an temperature controlled switch. it is located in the oven and this device is what lets the gas go through once it has reached a certain temp. It must only be done by a corgi qualified engineer and to be honest your loooking at about 100 pounds.

Oct 08, 2006 | Baumatic B604SS Stainless Steel Gas Single...

Not finding what you are looking for?
2002 Honda NX4 Falcon Logo

Related Topics:

75 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4536 Answers

yadayada
yadayada

Level 3 Expert

76846 Answers

bazzz7071
bazzz7071

Level 2 Expert

342 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...