Question about 1990 Yamaha TZR 250

1 Answer

Were tryin to take apart the rear end of our 1990 yamaha atv and its not wanting to come off and we have taken all the bolts out and everything that could hold it back

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 3,567 Answers

Looking at a parts diagram may reveal why it is not wanting to come apart. My guess is gasket sealer not wanting to release. Go to the site below where you can see a parts diagram for your specific ATV. You will select the actual brand, year, model, etc., once you go to the site. Part numbers and prices are also shown. You can order parts from this site. In the event no price is shown on a particular part and/or the notation "Not Available" is in the description, the part is not in stock. www.babbittsonline.com/pages/parts/viewbybrandand/parts.aspx

Posted on Sep 06, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I can't find my answer for what dirt. Ike swing arm will fit on my atv to make it a 3 wheeler


there is no product like that available . 3 wheelers were made ******* several years back

Apr 28, 2016 | Yamaha 2004 YFZ450 Base

1 Answer

Will a yamaha yfm 80 carb work on a yfm 100 ATV


if it bolts straight on it probably will
because the carby may be smaller than is required for the bigger motor
then consideration has to be given to top end power and main jet size

Oct 22, 2015 | Yamaha Motorcycles

1 Answer

How do you remove swing arm on a 99 yamaha big bear 350


Easy - take off tires, then caps over axle/castle nuts if you have them.
- take cotter pins and axle nuts off both ends of axle. Right side - remove brake drum, then remove two brake shoes, simple Springs connect them, you can pull apart intact, remove any collars, washers off the axle behind brakes, then there might be 4 bolts and a plate - the other side you can see the bearing. Now - this is important - for. The side with the brakes, take a socket bigger than the threads but size of axle lip - and you place that deep socket (side with brakes!) over the threads (threads will be inside deep socket) lip of socket touches lip of axle about 2-3 inches down - hit that w a hammer and the axle will go out to the left if facing rear of four wheeler. Next - remove brake lines and breather hose for rear end.
There are bolts that attach the rear end to the swing arm (to the right) take them out and maybe the bottom guard for rear end. Then where the rear end attaches to drive shaft tube portion of swing arm there are four bolts - when all that is done you'll be able to remove rear end. Undo top bolt or you might get away w/bottom for shock - next two pivot shaft nuts - big socket like, Allen head in middle - remove nut from pivot shaft (left and right side where swing arm pivots) then takeallAllen head and unscrew two thick bolts that the pivot shaft nuts tighten to our - there's a collar and bearing in there where the bike's swing arms pivot at. I've done it a dozen times - if you have any problems or that wasn't too clear, message me, I'll dig up some tech sheets from a service manual I got on a bike that year - close to same model - same mechanics, Yamaha was pretty universal. I got a 98 & 99 Yamaha 2wd and a 96 Yamaha 3504wd. All pretty easy to work on. I have a swing arm I might get rid of from Florida and a decent rate if yours is done for and you gotta replace. I sell and buy off eBay to keep most of my toys on the trail.Good luck

Nov 20, 2014 | Motorcycles

1 Answer

Trying to take apart Front wheel cyclinder on 1995 Yamaha Big bear ATV, so it can be rebuilt


If it is like a car and you want the pistons out. Dump out brake fluid and put some type penetrating oil inside for a short time. Use compressed air to blow pistons out. Stay away from the ends of the cylinder so you don't get hit.

Mar 27, 2014 | 1995 Yamaha YFM350 Big Bear 4x4 ATV...

1 Answer

How do i change rear breaks pads on kawsaki gpz1100 1995


bolt slides out when pin is removed but if it wasn't copper greased last time then they often seize.

Oct 22, 2012 | 1995 kawasaki GPZ 1100

1 Answer

I have a 2005 yamaha blaster and it cranks but it knocks really bad and when you press the gas it shuts off. We have cleaned the carborator and jets, taken the motor apart and everything. Inside the m


Hi Jennifer_384, for this situation I would call my local dealer or reputable shop's service/parts department and inquire about any possible quick fix or parts inquiry. If necessary transport your vehicle to the dealer or shop and have a professional technician take it for a test drive, if it is in running condition, and give you a written estimate of repairs and answer any specific questions you may have about your issue. Good luck and have a nice day. 2005 Yamaha ATV Service Repair Workshop Manuals

Jan 24, 2012 | Motorcycles

1 Answer

Helping a friend,where is the starter?Don't want to take off something that doesn't need to be taken off. 2001 polaris scrambler 400 4x4


<br /> <br /> sadly enough there is alot to do to get to the bolts easily<br /> <br /> <ol> <li>take off pullstart not the front few bolts that hold the cord but the ones on the case behind those.<br /></li> <li>you will now see 2 bolts under the flywheel to the bottom those are the front starter bolts.<br /></li> <li>Take off clutch cover and clutches (may be able to get away with just the front clutch) and you will see the rear starter bolts.</li></ol>

Mar 12, 2010 | Polaris ATV

2 Answers

Having trouble getting the bottom end apart


there may still be something that needs to be removed from the sides. check again. if all clear, close and pull open quickly several times to pop it off

Jul 22, 2009 | 2003 Suzuki RM 125

1 Answer

Greese fitting in the rear of a warrior atv


replace carrier bearings they are sealed bearings no need for a grease zirk would not keep bearings lubed.check swingarm bearing play. if worn, best to replace while repairing carrier,to save on labor repitition.turn wheels around & check for interference w/ brake caliper.wheel spacers are commercially available for this model. check ebay.

Feb 11, 2009 | 2003 Yamaha YZ 450 F

Not finding what you are looking for?
1990 Yamaha TZR 250 Logo

Related Topics:

181 people viewed this question

Ask a Question

Usually answered in minutes!

Top Yamaha Experts

dhnguyen

Level 2 Expert

281 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1144 Answers

Tony

Level 3 Expert

2600 Answers

Are you a Yamaha Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...