Question about Harley Davidson FLSTFI Fat Boy Motorcycles

2 Answers

Security system FOB inactive, battery good, no pin. Need to disarm. What can we try next?

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Renaissance:

    An user who is expert in 3 categories / brands.

  • Harley Davidson Master
  • 1,554 Answers

You'll need the PIN number.
If you don't know it, you'll have to change it to a 5 digit PIN number you select.

With the fob present, turn IGN switch:
IGNITION-OFF-IGNITION-OFF-IGNITION
Press LEFT turn signal switch 3 TIMES
Press RIGHT turn signal switch 1 TIME and release
Turn signals will flash 3 times. Current PIN will appear in odometer. The first digit will be flashing.

If changing PIN, enter first digit (a) of new PIN by pressing LEFT signal switch (a) time(s) i.e., for the number 1, press one time. for the number 5, press 5 times.

Press RIGHT signal switch 1 TIME and release.
the new digit (a) will replace the current in odometer window.

Enter second digit (b) with LEFT signal switch.

Repeat until PIN is set.

Once PIN is set (either new or old PIN), to disarm security system, DO NOT sit on seat, lift bike off kick stand, or anything else that will activate the security mode!

Turn IGN to IGNITION.

Quickly (within 2 seconds) hold BOTH turn signal switches until confirmation signal (KEY icon flashes at fast rate, in odometer window, a flashing "-" will be followed by 4 more dashes = "----")

Enter 1st digit (a) in PIN by pressing LEFT turn signal switch (a) times (i.e., 5 times for the number 5)
The 1st "-" will become the 1st digit (i.e., "5")

Press RIGHT switch signal 1 TIME.
The 1st digit is stored and the dash will flash.

Enter 2nd digit (b), and repeat sequence until done.

After the 5th digit is entered, the KEY icon stops blinking, and the system is disarmed.

The system will stay off until the IGN switch is turned off.

If at any time during disarming sequence an error is made, wait 2 minutes before trying again.

Posted on Dec 15, 2012

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 379 Answers

You CANNOT disarm the alarm without a PIN. One option is to buy a new key fob and set up the alarm using the new fob. Second, there is a chance the fob has fallen out of synchronization with the alarm by being accidentally pressed repeatedly in your pocket. You can try resetting it by HOLDING THE BUTTON DOWN FOR 15 SECONDS until the alarm responds with 2 turn signal flashes. After confirmation(flashes), you can resume normal alarm operation. Use your manual and set the alarm up WITH A PIN, so if your fob croaks again you can arm/disarm the alarm.Harley alarms are good, but notoriously hard to set up and troubleshoot!!!

Posted on Oct 10, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do you work 2006 street glide push button key fob


1 long push on the remote turns it on and 2 quick clicks turn it off.
Disarming function may require practice. The key fob button must be pressed twice within 1.5 seconds to send the disarm command. The action is very similar to double-clicking a computer mouse. Light quick taps work best; very hard or very slow taps are less likely to work. The key fob sends a RF signal to activate all remote TSSM functions. The left front turn signal switch wire serves as the vehicle's antenna. If the TSSM does not respond (no confirmation at arming/disarming system) or responds weakly (limited range, won't consistently arm/disarm or synchronize),

Verify key fob battery voltage is at least 2.9 volts. Replace the key fob battery every 2 years.


Interference from physical surroundings may affect RF transmission. Place the fob next to left hand grip and disarm with two clicks or move the motorcycle to a new location and try again.

Check for damage to antenna wire. Does left turn signal work?

After a battery disconnect, the TSSM will not enter the configuration mode on the first attempt. All attempts to assign a fob or enter the configuration mode will require at least two attempts.

The TSSM system uses batteries in the key fob and siren. These are the only parts requiring periodic maintenance.

Battery Replacement
Open the key fob case, place a thin blade between the 2 halves of the case, slowly twist the blade remove and replace battery positive + side down, use a Panasonic 2032 or equivalent, align the case and circuit board, snap the case halves together, while standing next to the motorcycle, press and hold the key fob button for 10 to15 seconds until the security system responds with two turn signal flashes/siren chirps.

May 04, 2014 | Harley Davidson Motorcycles

1 Answer

Security key on and bike wont start


First, open fob and make sure battery is making good contact and no corrosion on contacts.

Also, you might need a new fob battery.

Finally, if you know the security code, you can disable the security system.

DO NOT sit on seat, lift bike off kick stand, or anything else that will activate the security mode!

Turn IGN to IGNITION.

Quickly (within 2 seconds) hold BOTH turn signal switches until confirmation signal (KEY icon flashes at fast rate, in odometer window, a flashing "-" will be followed by 4 more dashes = "----")

Enter 1st digit (a) in PIN by pressing LEFT turn signal switch (a) times (i.e., 5 times for the number 5)
The 1st "-" will become the 1st digit (i.e., "5")

Press RIGHT switch signal 1 TIME.
The 1st digit is stored and the dash will flash.

Enter 2nd digit (b), and repeat sequence until done.

After the 5th digit is entered, the KEY icon stops blinking, and the system is disarmed.

The system will stay off until the IGN switch is turned off.

If at any time during disarming sequence an error is made, wait 2 minutes before trying again.

Mar 16, 2013 | 2008 Harley Davidson FLHX Street Glide

2 Answers

Which type of stator do i order for my 2003 fxdx


when it comes to electrics and harleys always buy the harley davidson oem stator right from your local dealership.

Feb 26, 2013 | 2003 Harley Davidson FXDX Dyna Super Glide...

1 Answer

Cannot disarm the security system on 2007 road king in order to change battery


Hi Anonymous, for more information about your question please visit the websites below. Good luck and have nice day.
Set Change Override Transport Harley Security Alarm PIN Code No Key Fob...

Nov 15, 2012 | Harley Davidson FLHRI Road King...

1 Answer

Security system on 2005 harley sportster


Hi Anonymous, for more information on your question please visit the websites below and good luck:
Set Change Override Transport Harley Security Alarm PIN Code No Key Fob...

Mar 20, 2012 | 2005 Harley Davidson XL 1200 C Sportster...

1 Answer

I've charged my battery, but my bike still won't start. Also, the security light is on, but I have my key fob in my pocket.


The usual reasons the fob doesn't disarm the security system is:
1) a damaged fob
2) discharged fob battery (Panasonic 2032 or equivalent)
3)electromagnetic interference
a. verify the fob in not in a metal enclosure or within 3" of any other electronic device.
b. place the fob on the seat, start motor and return fob to pocket.
c. move the bike at least 15' from the spot of interference.
With the Fob near the bike, try disabling the security system.

You'll need the PIN number.
If you don't know it, you'll have to change it to a 5 digit PIN number you select.

With the fob present, turn IGN switch:
IGNITION-OFF-IGNITION-OFF-IGNITION
Press LEFT turn signal switch 3 TIMES
Press RIGHT turn signal switch 1 TIME and release
Turn signals will flash 3 times. Current PIN will appear in odometer. The first digit will be flashing.

If changing PIN, enter first digit (a) of new PIN by pressing LEFT signal switch (a) time(s) i.e., for the number 1, press one time. for the number 5, press 5 times.

Press RIGHT signal switch 1 TIME and release.
the new digit (a) will replace the current in odometer window.

Enter second digit (b) with LEFT signal switch.

Repeat until PIN is set.

Once PIN is set (either new or old PIN), to disarm security system, DO NOT sit on seat, lift bike off kick stand, or anything else that will activate the security mode!

Turn IGN to IGNITION.

Quickly (within 2 seconds) hold BOTH turn signal switches until confirmation signal (KEY icon flashes at fast rate, in odometer window, a flashing "-" will be followed by 4 more dashes = "----")

Enter 1st digit (a) in PIN by pressing LEFT turn signal switch (a) times (i.e., 5 times for the number 5)
The 1st "-" will become the 1st digit (i.e., "5")

Press RIGHT switch signal 1 TIME.
The 1st digit is stored and the dash will flash.

Enter 2nd digit (b), and repeat sequence until done.

After the 5th digit is entered, the KEY icon stops blinking, and the system is disarmed.

The system will stay off until the IGN switch is turned off.

If at any time during disarming sequence an error is made, wait 2 minutes before trying again.

Feb 03, 2011 | 2008 Harley Davidson FLHRC Road King...

3 Answers

Lights on the bike flash and the bike will not start, can anyone help?


If you have a factory security system with the sensors located inside the key fobs you probably need to replace your fob battery.

Aug 08, 2010 | 2008 Harley Davidson FLHX Street Glide

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

1,688 people viewed this question

Ask a Question

Usually answered in minutes!

Top Harley Davidson Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

Gills Lango

Level 2 Expert

195 Answers

Mike

Level 3 Expert

4336 Answers

Are you a Harley Davidson Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...