Question about Gilera Runner VX 125 Motorcycles

3 Answers

Hi i have a piaggio x9 125 my brake lights have stopped working i have checked the fuses the brake switches the bulbs and even the wires that connect to the lights thm selfs it seems like thetres no power going to the purple and black wire going in to the brake lights them selfs i tested them with a tester and its like there dead what could it be please help im out of ideas

Posted by on

3 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Hi im got the same problem have you found the problem

Posted on May 07, 2010

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

My Piaggio x9 125cc won't start. It was running fine before but when i pulled up outside my home and tried to start it again it won't.
The oil light stays on but i have checked the oil and it is fine.
Also when i try to start it the rev counter spins around???
Have you any ideas what could be causing the problem....I need help fast!!!
Cheers
Steve

Posted on Nov 30, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 69 Answers

Probably a bad earth somewhere, clean rust and **** off all connections.

Posted on Sep 04, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

No brake light


unplug the lcd light someone step on the brake pedal with a tester bulb, test if current gets to the light.

Aug 08, 2015 | Cars & Trucks

2 Answers

How to trouble shoot no brakelights?


Well first you go to the fuse box and find stop light see if it has blown if not go to the rear and remove the globe holder plug assy which has either double or single light bulb if double get test light and touch either wire and get someone to turn on the ign switch [on but not start] and also put foot on the brake pedal ,if the test light dont light test the other wire base ,if no light comes on then go to the stop light switch mostly on the brakeline connection box under the bonnet or it could have a brake switch in the cab above the brake pedal and that will have either a broken wire or switch unserviceable .

Jul 11, 2014 | 1986 Dodge D150

3 Answers

Brake lights not working


1. Check fuse
2. Installed trailer plug lately, if so check wiring
3. Check switch above pedal arm

May 27, 2014 | 2004 GMC Envoy

4 Answers

Why my stop lamp dont turn on when i stop


While if it was working before then there is little problems which you have to check steep by steep !
1. go check your car light bulbs & light grips on back of your car .
If Bulbs look good then.
2. check fuse in fuse box which is on driver side & on fuse box cover its written on stop lamp & you can check other fuse as well just to confirm if there is another shorting.
If all fuse are good then check .
3.Check brake pedal upper side there is one switch which have two wire out check there wire or grip if its have losing then it wont work.
if its look proper attached then .
4.This switch have threads which can be adjustable before taking any step to adjust just check when you are pressing a brake pedal there is a plastic needle working inside its come out or not ,If its come out then your brake light switch gone wrong or if its not coming then plastic needle is jammed inside & your car brake light not working.
Just to confirm if your brake switch is in good condition or in bad condition .
Okay this is final steep you have to check or confirm it switch problem .....
5. There is two wire on back of brake pedal switch or in a grip coming out , So if its in grip or just on clips, then take a wire piece & bypass or joint both wire which is coming from wire loom sid to brake pedal & check your brake lamps if its blink or on than 100% you car brake pedal switch is not working or inside its short , So replace your car brake pedal switch or if still not blink or On then there is some issue in your car wiring & you better check you car to you auto electrician......
Hopefully you will save your amount not to visit you auto electrician.
best of luck....

May 15, 2014 | 1994 Nissan Sentra 4-Door

1 Answer

I have no stop light on a 1979 flh


Hi Peter, always check fuses and bulbs first for broken filaments. Then check the connection at the rear fender wiring harness, inspect for corroded, broken or loose pins. Use a dab of dielectric grease and repair as necessary. Check your brake relay if you have one , check your brake light switches for continuity, some models rear turn signals were single filament bulbs only, no running light. If all else fails get out your test light and start tracking the power wire from the harness connection. For a free wiring diagram please visit the website below and good luck:

May 19, 2012 | Harley Davidson Motorcycles

2 Answers

Hi, i have a 206HDI 51 plate and for some reason my brake lights (O/S N/S and tailgate)have stopped working. i've changed fuses but still no joy, bulbs also seem to be ok. All the other light are working...


Check the brake switch, located on the break pedal. Connect the 2 wires together and if the break lights work, a new switch is required.(if only 1 wire connect to frame/chassis)

Jul 26, 2009 | 1991 Peugeot 405

1 Answer

All brake lights suddenly stopped working changed bulbs park light fuse and cant find any blown fuses what else can it be


brake switch on the pedal bad.bad relay. do you have a second fuse box if so check it. look at the wiring see if it is frayed or chafed check the connections.check all the fuses not just the ones labeled brakes.switch the relay with one that you know is good like turn signal and see if the turn signal works then check brakes.use a 12 volt test light check the brake switch and probe the wires. hope this helped if not write back and i'll give you more ideas.

Apr 24, 2009 | 1996 Buick Park Avenue

3 Answers

The brake lights are not working


could be the wiring connection. i'm sure the three lights came from the same line from the brake switch. so if the third light is coming on, then the connection where they separated should be tyraced. or the ground of the side lights could be missing,. check the ground wire of the side lights for proper grounding.

tnx 4 using fixya,

drcool

Nov 04, 2008 | 1999 Dodge Caravan

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

646 people viewed this question

Ask a Question

Usually answered in minutes!

Top Gilera Experts

Gino Cussen
Gino Cussen

Level 2 Expert

216 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

yadayada
yadayada

Level 3 Expert

75051 Answers

Are you a Gilera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...