Pure SWAG on my part, but the only 2 things I can think of on the back cab wall are the power slider motor ( if a rear power slider is installed ) or the VSM ( Vehicle Security Module, called a Body Security module on 04-05 MY ).
should not be clicking, maybe an issue with maybe the ground to the VSM ?
You would need to remove the seat back if it is a SuperCrew or SuperCab, to get to the VSM to check the ground, and if any of the pins are discolored in the connectors ( remove and check ):
These are the pictures from when I installed the heated seats in my SuperCrew
Where the screw driver goes into release the clip.
Close up of what you are shooting for when the seat is installed, the screw driver needs to go through that openeing to trigger the clip.
The trigger you need to press to release the seat back. Best once you get 1 side released, stick something under it so it does not click back into place, I used a 2x4 in a sock to slide between the seat back and bottom.
No I don't. I believe the battery is located under the seat but no matter where I looked in that area, I could not find the secret to removing the seat, and please be aware that the seat is a two seater. The small cover at the back has been removed. I don't want to start pulling and pushing and possibly break some plastic tabs that may be holding it in place. In the end, I may have to go by the dealership and ask them.
do u have an owners manual??
×