Question about 1987 Suzuki GSX 750 ES

1 Answer

Wiring diagram 1987 Suzuki GSX 750 ES

Where is the Rev Counter (Tachometer) was supposed to go if I trace it from the clocks? There's a sender unit on RHS of the crank, another on top of gearbox under carbs. Not sure which is for Oil Pressure light & Oil Temp I could just link it up to ignition coil Light - can anyone kindly point me in the right direction? 1) Where to locate Tachometer Sender Unit? 2) Oil Pressure sender unit location? 3) Oil Temp sender unit location? Thanking all kindly in anticipation @

Posted by on

  • Doug Collyer
    Doug Collyer Jul 12, 2019

    *this question pertaining to '87 Suzuki Gsx750efe/es

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    One Above All:

    The expert with highest point at the last day of the past 12 weeks.

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

  • Suzuki Master
  • 57,416 Answers

Hi, Doug for this scenario you will need your service manual, parts fiche, and owners manual if you can't find the best tool you ever bought for your Suzuki, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://www.google.com/search?q=Wiring+diagram+1987+Suzuki+GSX+750+ES&tbm=isch&source=univ&sa=X&ved=2ahUKEwiVwKqZha_jAhWBVs0KHXRNDTsQsAR6BAgGEAE&biw=1440&bih=757
Suzuki Motorcycle Wiring Diagrams
Suzuki GSX R750 Service Manual
https://www.partsfish.com/page/oem-parts-for-suzuki
http://mybikemanuals.com/suzuki

Posted on Jul 12, 2019

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
  • 29 Answers

SOURCE: oil pressure sender

It is located on the side of the oil pan, enclosed is a little more info on testing and installation.

TESTING
See Figure 1

  1. Unplug sensor connector and insert a jumper wire between terminals 1 and 2.
  2. Start the vehicle.
  3. If the light is on, check the harness and dashboard light.
  4. If the light is off, replace the sensor and recheck the light operation.
0900c1528008c49c.jpgFig. 1: Connect a jumper wire between terminals 1 and 2REMOVAL & INSTALLATION
See Figures 2, 3 and 4
  1. Raise and safely support the vehicle.
  2. Unplug the connector from the sensor.
  3. Unfasten the sensor mounting bolts and remove the sensor from the oil pan.
To install:
  1. Install the sensor into the oil pan.
  2. Tighten the sensor mounting bolts.
  3. Plug in the sensor connector.
  4. Lower the vehicle.
0900c1528008c49d.jpgFig. 2: The oil pressure sensor is mounted to the side of the oil pan-850 model shown 0900c1528008c49e.jpgFig. 3: Unplug the connector from the oil pressure sensor 0900c1528008c49f.jpgFig. 4: Unfasten the retaining bolts and remove the sensor

Posted on Oct 01, 2008

TLRogue
  • 99 Answers

SOURCE: How to replace the water temp sender in a 2003 Audi Allroad

make sure engine is COLD. put little grease around new sensor and keep it close at hand. Remove the plug on the sensor, then slide the retaining that holds sensor in, out. pull sensor our of housing and quickly replace with new. replace clip and plug. top up coolant if necessary. easy as that..

TL

Posted on Jan 23, 2009

  • 1 Answer

SOURCE: 1990 isuzu pickup temp sender location

It is on the underside of the intake manifold near the front directly below where the water hose and thermostat connect on the top
Jack Boersema

Posted on Mar 02, 2009

  • 1 Answer

SOURCE: Location of oil pressure sending unit on 2003 GMC 4.3L

2 the right of dist. cap

Posted on Apr 07, 2009

  • 323 Answers

SOURCE: Oil sender not working, Location

The oil sender is at the back of the engine beside the distributor.

Posted on Apr 28, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Any one know 4by4 Mitsubishi triton no codes cranks need help urgent


the tachometer ( rev counter) get its impulses from the ignition system or in the case of a diesel from the crankshaft position sensor
if it runs with introduced fuel ( dangerous for a diesel) but then dies, that indicates insufficient fuel pressure to the injectors
could be a diesel pressure pump ( test to 25,000 psi) not producing sufficient pressure to work injectors
problem fuel supply to pump, tank venting, filters , air in system etc

Oct 05, 2016 | Mitsubishi Cars & Trucks

1 Answer

Rev counter stuck and no display on clock


Hi, Anonymous for this situation I would call my local dealer or reputable shop's service/parts department and inquire about any possible quick fix, answers, or parts inquiry. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
Yamaha Tach bouncing the problem and the the fix
Tachometer Needle Doesn Move
2008 2009 Yamaha YZF R6 Service Manual R6 Moto Data Project
OEM parts for Yamaha
http://mybikemanuals.com/yamaha/yamaha-yz-owners-manuals

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e


Mar 10, 2013 | 2008 Yamaha YZF-R6

1 Answer

2003 Kawasaki ZZR 600 the rev counter is not working


Hi, Gail_turn757 and the usual suspects are:
1. Instrument wiring harness connector corroded.
2. Faulty power or ground wire at the tachometer.
3. Broken, loose or corroded tachometer wire at the coil.
4. Short between the ignition coil and the tachometer.
5. Broken tachometer cable.
6. Faulty tachometer.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
http://kawasakiworld.com/zx-12r/25727-tachometer-not-working.html
ZZR 600E3 Rev counter and Speedo Issue
Kawasaki 2000 2002 ZX600J and 2005 2008 ZZR600 Service Repair Factory... $17
OEM Parts for Kawasaki
Kawasaki Ninja Owners Manuals

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Apr 24, 2012 | 2003 kawasaki ZZR 600

1 Answer

2002 Kawasaki ER-5 tachometer not working


Hi, Mike and the usual suspects are:
1. Instrument wiring harness connector corroded.
2. Faulty power or ground wire at the tachometer.
3. Broken, loose or corroded tachometer wire at the coil.
4. Short between the ignition coil and the tachometer.
5. Broken tachometer cable.
6. Faulty tachometer.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Kawasaki ER5 rev counter
https://www.kiwibiker.co.nz/forums/showthread.php/159427-ER5-rev-counter-not-working
KAWASAKI ER 5 Service Manual
OEM Parts for Kawasaki
http://mybikemanuals.com/kawasaki

Feb 24, 2012 | 2002 kawasaki ER-5

1 Answer

My 1998 Polo Classic 1.6 classic's speedometer and rev counter sometimes don't work. What could it be?


Known issue with this era. Google it. Involves removing the cluster and desiring and resoldering the connections at the trace Trace connections for the speedometer and tachometer.

Sep 12, 2011 | Volkswagen Polo Cars & Trucks

1 Answer

2000 Kawasaki ER-5 tachometer not working


Hi, Anonymous and the usual suspects are:
1. Instrument wiring harness connector corroded.
2. Faulty power or ground wire at the tachometer.
3. Broken, loose or corroded tachometer wire at the coil.
4. Short between the ignition coil and the tachometer.
5. Broken tachometer cable.
6. Faulty tachometer.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Kawasaki ER5 rev counter
https://www.kiwibiker.co.nz/forums/showthread.php/159427-ER5-rev-counter-not-working
KAWASAKI ER 5 Service Manual
OEM Parts for Kawasaki
http://mybikemanuals.com/kawasaki

Mar 20, 2011 | 2000 kawasaki ER-5

1 Answer

1998 Kawasaki ER-5 tachometer not working


Hi, Bitofalad and the usual suspects are:
1. Instrument wiring harness connector corroded.
2. Faulty power or ground wire at the tachometer.
3. Broken, loose or corroded tachometer wire at the coil.
4. Short between the ignition coil and the tachometer.
5. Broken tachometer cable.
6. Faulty tachometer.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Kawasaki ER5 rev counter
https://www.kiwibiker.co.nz/forums/showthread.php/159427-ER5-rev-counter-not-working
KAWASAKI ER 5 Service Manual
OEM Parts for Kawasaki
http://mybikemanuals.com/kawasaki/kawasaki-uncategorized-owners-manuals

Jan 15, 2011 | 1998 kawasaki ER-5

1 Answer

Rev counter activates when ignition is turned on ,but wont work when engine running


This is usually caused by a broken sender wire. Check the cable for tight bends from the sender unit up to the rev counter, you will probably have to purchase a new sender unit.
Hope this helps.

Oct 22, 2010 | 2004 Honda CB 1300

1 Answer

My spedo and rev counter are not working!need to fix


if either pointer or ( needle ) is damaged a new clock will be needed, allso check condition of both drive cables that go to your clocks remove with plyers or fingers if poss, then trace back to engine and front wheel, allso disconnect ,turn inner cable with your fingers the other end will turn if good. the end of the cable should be square ,and not rounded off ,allso oil cable from the top if stiff.

Feb 14, 2010 | 1981 Yamaha XS 400

1 Answer

Hi my yzf 750 has an intermitant rev counter keeps flicking to 7-8000 revs then back down..is it meter or sender what do you think ? thanks Rich oxford


the tachometer is electronically controlled through the CDI unit and when it flicks like that, that part of the cdi is going bad i recommend to find a used one cause a new one gets really expensive

Jul 13, 2009 | Yamaha RX-V663 Receiver

Not finding what you are looking for?
1987 Suzuki GSX 750 ES Logo

Related Topics:

17 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

Marvin
Marvin

Level 3 Expert

85108 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

5914 Answers

richard libby

Level 2 Expert

208 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...