SOURCE: ccm r30 rotax 604e year of reg 2002 the engine has
if you are realy lucky and the bike wasn't going to fast and who ever was riding it pulled in the clutch quickly.. then you might get away with just a top end
but no two ways about it the engine has to come apart.... to do it properly special tools and knowlede required you will need to find a shop
Good Luck
SOURCE: clutch problem on ccm r30
firstly check your cable adjuster to make sure the gremlins havent taken the slack out during your absence some gouls think this is a funny prank to play if this checks out ok have you given it a decent period of time for the oil to warm up & the clutch to operate properly oil becomes sticky after standing for a period of time creating a film between the friction & steel plates causing clutch slip usualy this can be rectified by simply changing the oil & filter
99 views
Usually answered in minutes!
×