Question about 1992 kawasaki ZZR 400

1 Answer

1992 Kawasaki ZZR 400 how to test the ignition coils

I need electrical information to test coils etc on 1992 zzr 400 but need to download the information. can you suggest a download site etc @

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    One Above All:

    The expert with highest point at the last day of the past 12 weeks.

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

  • kawasaki Master
  • 51,988 Answers

Hi, Orry you can download everything you need from here for this scenario you will need your service manual that has all fastener torque specs and a wiring diagram on the back pages, parts fiche, and owners manual if you can't find the best tool you ever bought for your Kawasaki, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
How to test Ignition Coils on Motorcycles multi meter
Testing your motorcycle coil
Kawasaki ZXR400 Service Manual Supplement
OEM Parts for Kawasaki
http://mybikemanuals.com/kawasaki

Posted on Nov 01, 2018

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: what battery model do i need for zzr 400 1995?

Hi luke my parts book say it uses a ctx9bs

Posted on Jan 15, 2009

tellme2
  • 137 Answers

SOURCE: Kawasaki Zzr 400 Manual

ello m8,, i havent tried these guyz yet,, but they do downloadable manuals,as well as sell yuh one, but try em,, its www.repairmanual.com nice 1 ,,hope it helps,,

Posted on Feb 27, 2009

  • 25 Answers

SOURCE: i need an maintainence manual for a zzr 400

there is not a manual for the zzr 400 so use the zzr 600 everything is the same except from the carbs and the head

Posted on Aug 19, 2010

Testimonial: "thanks"

laughton5983
  • 2192 Answers

SOURCE: Will kawasaki Zzr 600 carburetor will fit in Zzr 400 engine? In my country Zzr 600 parts are easily available but not of Zzr 400. Please help!!

Not without a lot of work
try eBay international and import from an available country

Posted on Apr 11, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1994 Kawasaki ZZR 400 igniter test


Hi, Emad for this scenario you will need your service manual that has all fastener torque specs and a wiring diagram on the back pages, parts fiche, and owners manual if you can't find the best tool you ever bought for your Kawasaki, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
How to test motorcycle CDI box ignition coil
How to test motorcycle pickup coils
Kawasaki ZXR400 Service Manual Supplement
OEM Parts for Kawasaki
http://mybikemanuals.com/kawasaki

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e



Nov 29, 2013 | 1994 kawasaki ZZR 400

1 Answer

1991 Kawasaki ZZR 400 cam timing marks


Hi, Cc for this scenario you will need your service manual that has all fastener torque specs and a wiring diagram on the back pages, parts fiche, and owners manual if you can't find the best tool you ever bought for your Kawasaki, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
1991 Kawasaki ZZR 400 cam timing marks Google Search
https://www.zzr-international.co.uk/viewtopic.php?f=17&t=3299
Kawasaki ZXR400 Service Manual Supplement
OEM Parts for Kawasaki
http://mybikemanuals.com/kawasaki

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Oct 17, 2013 | 1991 kawasaki ZZR 400

1 Answer

1997 Kawasaki ZZR 400 will not start backfires


Hi, Anonymous and the usual suspects are:
1. Severely discharged or a damaged battery should have 12.5 volts or more and be able to pass a proper "LOAD" test if necessary, you may have a preliminary reading of 12.5 volts or more but little or zero amperage the battery is faulty and must be replaced, AGM batteries fail in this scenario more so than lead-acid batteries.
2. Check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
3. Faulty main circuit breaker and or connections.
4. Faulty ignition coil and or connections.
5. Faulty spark plug, oil or gas fouled, wrong heat range or service type, wrong gap, loose in the cylinder head, broken electrode or insulator.
6. Faulty spark plug cables, leaking or broken, internal damage check for spark leakage in the dark.
7. Faulty ignition module, switch, CKP, MAP, CMP, sensor and or any connector in the ignition circuit could have corroded, loose, or broken pins/sockets
8. Burnt exhaust valve or air leak in the exhaust system.
9. Improper valve clearance (too tight).
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Won Start Just Turns Over And Backfires Fixed
http://www.kawasakimotorcycle.org/forum/kawasaki-streetbikes-sportbikes/31762-need-help-bike-wont-cranks-backfires.html Kawasaki zzr 400 manual pdf
OEM Parts for Kawasaki
http://mybikemanuals.com/kawasaki

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Sep 25, 2013 | 1997 kawasaki ZZR 400

1 Answer

1996 Kawasaki ZZR 400 wiring diagram


Hi, Garth for this scenario you will need your service, parts fiche, and owners manual if you can't find the best tool you ever bought for your Kawasaki, despair not, for a mere zero $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need for viewing and printing please click on the blue links below. Good luck and have a wonderful day.
1996 Kawasaki ZZR 400 wiring diagram Google Search
Kawasaki Motorcycle Wiring Diagrams
Kawasaki ZXR400 Service Manual Supplement
OEM Parts for Kawasaki
http://mybikemanuals.com/kawasaki

Feb 02, 2013 | 1997 kawasaki ZZR 400

1 Answer

2002 Kawasaki ZZR 400 valve clearance


Hi, Neels for this scenario you will need your service, parts fiche, and owners manual if you can't find the best tool you ever bought for your Kawasaki, despair not, for a mere zero $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need for viewing and printing please click on the blue links below. Good luck and have a wonderful day.
Help Valve clearance specifications KawiForums Kawasaki Motorcycle Forums
ZZR International View topic zzr400 valve clearance which spec
Reading Book Zzr 400 Manual
OEM Parts for Kawasaki
http://mybikemanuals.com/kawasaki

Nov 17, 2012 | 2002 kawasaki ZZR 400

1 Answer

1997 Kawasaki ZZR 400 no spark


Hi, Anonymous and the usual suspects are:
1. Fouled spark plugs.
2. Severely discharged or a damaged battery should have 12.5 volts or more and be able to pass a proper "LOAD" test if necessary, you may have a preliminary reading of 12.5 volts or more but little or zero amperage the battery is faulty and must be replaced, AGM batteries fail in this scenario more so than lead-acid batteries.
3. Check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
4. Loose connection at the ignition coil or plug between ignition sensor and module.
5. Spark plug cables in bad condition, shorting/leaking, spark plug cable connections loose check for spark leakage in the dark.
6. Faulty ignition coil or electronic control module.
7. Faulty pulse coil.
8. Faulty CKP, CMP, or BAS sensor.
9. Faulty ignition switch.
10. Tilt sensor needs a reset.
11. Security alarm failing to disarm needs reset
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://www.kiwibiker.co.nz/forums/showthread.php/58452-ZZR-400-No-spark-!!!!!
How to diagnose no spark situation on motorcycle
Kawasaki ZXR400 Service Manual Supplement
OEM Parts for Kawasaki
http://mybikemanuals.com/kawasaki

Nov 16, 2012 | 1997 kawasaki ZZR 400

1 Answer

1993 Kawasaki ZZR 400 valve clearance specs


Hi, Delboy for this scenario you will need your service, parts fiche, and owners manual if you can't find the best tool you ever bought for your Kawasaki, despair not, for a mere zero $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need for viewing and printing please click on the blue links below. Good luck and have a wonderful day.
ZZR International View topic zzr400 valve clearance which spec
Valve clearance adjustment using shims on motorcycle Part 1
Kawasaki ZXR400 Service Manual Supplement
OEM Parts for Kawasaki
http://mybikemanuals.com/kawasaki

Oct 04, 2012 | 1993 kawasaki ZZR 400

1 Answer

1997 Kawasaki ZZR 400 will not start


Hi, Alan and the usual suspects are:
1. Fuel tank empty.
2. The fuel tank has old dead gas.
3. Fuel tank bottom contaminated with ethanol sludge, dirt, water, rust, etc.
4. Fuel supply valve/petcock turned off.
5. Fouled spark plugs.
6. Engine flooded as a result of overuse of the choke.
7. Vacuum hose to the fuel supply valve/petcock disconnected, broken, cracked, or pinched.
8. Fuel valve/petcock or filter clogged.
9. Fuel line to carburetor or throttle body pinched, kinked or blocked.
10. Carburetor float stuck.
11. Fuel injectors clogged.
12. Fuel injectors stuck open.
13. Quick disconnect check ball stuck.
14. Compression below 75 PSI.
15. A stuck-bent-burnt valve.
16. Improper valve clearance (too tight)
17. Severely discharged or a damaged battery should have 12.5 volts or more and be able to pass a proper "LOAD" test if necessary, you may have a cursory reading of 12.5 volts or more but little or zero amperage the battery is faulty and must be replaced, AGM batteries fail in this scenario more so than lead-acid batteries.
18. Check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
19. Loose or corroded wire connection at the coil or plug between ignition sensor and ECM module.
20. Spark plug cables in bad condition and shorting check for spark leakage in the dark, cable connections are loose or connected to the wrong cylinders.
21. Ignition timing incorrect due to a faulty ignition coil, ignition module or MAP, CMP, CKP, O2, TPS, ETP, IAC sensors.
22. Faulty neutral, clutch, kickstand safety switch.
23. Faulty fuel pump or fuse or relay.
24. Faulty or corroded run/stop switch.
25. Tilt sensor needs a reset.
26. Security system not disarming alarm needs a reset.
27. Check for engine trouble codes.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Won Start Just Turns Over And Backfires Fixed
3 Things to Look for When Your Motorcycle Won Start The Allstate Blog
http://www.bazarnumerotrois.com/zzr-400-manual.pdf
OEM Parts for Kawasaki
http://mybikemanuals.com/kawasaki

Sep 01, 2012 | 1997 kawasaki ZZR 400

1 Answer

1998 Kawasaki ZZR 250 CDI test


Hi, Gasgit for this scenario you will need your service manual that has all fastener torque specs and a wiring diagram on the back pages, parts fiche, and owners manual if you can't find the best tool you ever bought for your Kawasaki, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
HELP No spark Ninja 250
How to test motorcycle CDI box ignition coil
how to test and repair motorcycle CDI electronic ignition module coil...
Kawasaki ZZ R250 Service Manual Page 2
OEM Parts for Kawasaki
Kawasaki Ninja Owners Manuals

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e



Sep 13, 2010 | 1998 kawasaki ZZR 250

1 Answer

1991 Kawasaki ZZR 400 cam timing


Hi, Allensteelwo for this scenario you will need your service manual that has all fastener torque specs and a wiring diagram on the back pages, parts fiche, and owners manual if you can't find the best tool you ever bought for your Kawasaki, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
1991 Kawasaki ZZR 400 cam timing Google Search
INSTALLING ZXR400 CAMCHAIN ONTO CRANK
Kawasaki ZXR400 Service Manual Supplement
OEM Parts for Kawasaki
http://mybikemanuals.com/kawasaki

Jun 11, 2009 | 1991 kawasaki ZZR 400

Not finding what you are looking for?
1992 kawasaki ZZR 400 Logo

Related Topics:

366 people viewed this question

Ask a Question

Usually answered in minutes!

Top kawasaki Experts

Arnie Burke
Arnie Burke

Level 3 Expert

5592 Answers

Marvin
Marvin

Level 3 Expert

83772 Answers

vtrktrmn

Level 2 Expert

201 Answers

Are you a kawasaki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...