Question about 2015 Husqvarna FE 350

1 Answer

2015 Husqvarna FE 350 front sprocket torque spec

Husqvarna FE 350 front sprocket (13T) torque specification @

Posted by Anonymous on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    One Above All:

    The expert with highest point at the last day of the past 12 weeks.

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

  • Husqvarna Master
  • 51,921 Answers

Hi, Anonymous for this scenario you will need your service manual that has all fastener torque specs and a wiring diagram on the back pages, parts fiche, and owners manual if you can't find the best tool you ever bought for your Husqvarna, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Torque for front sprocket Changing Front Sprocket KTM 2016 EXC 350 https://drive.google.com/file/d/0B77xxVHfTnHjeG8wcldIVXFUOEE/view free service manual 2015 Husqvarna FE350 Parts OEM Diagram Husqvarna FE 350 EU Owner Manual

Posted on Oct 28, 2018

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: torque setting

The sprocket nut torque setting is 132Nm. If you are after the plastic cover torque settings, i dont think they have one. Hope this helps.

Posted on May 01, 2009

rwvanlue
  • 486 Answers

SOURCE: husqvarna chainsa;starts but chain sprocket doesnt

1) Chain brake is on. Pull the handle back towards the operator
2) Chain is too tight on bar
3) Debris caught inbetween bar and chain
4) Sprocket teeth are worn out

I’m happy to assist further over the phone at https://www.6ya.com/expert/rolandw_c013176d62ee17ae

Posted on Nov 26, 2009

Testimonial: "Chain brake was stuck on. Thanks very much!"

dontbother10
  • 2220 Answers

SOURCE: Hi, I'm looking for a Husqvarna 365 chainsaw sprocket cover

No response to CR.

Posted on Apr 09, 2010

heimlich
  • 1978 Answers

SOURCE: 1984 XR250R - I changed

The metal guide is there to protect the engine case if the chain breaks. Shaving 1/8th inch will not hurt any thing under most conditions. Leaving the piece in will still help protect the bike.

Posted on Aug 21, 2010

  • 2239 Answers

SOURCE: I need the to know, what is the torque spec. for

The official torque figure is 9-10nm. for the allen screws securing the cylinder.

Posted on Apr 24, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Head screws torque specs Husqvarna 359 chainsaw


The cylinder bolts are 5mm with a 4mm allen head, the torque should be 10nm.

Sep 16, 2017 | Husqvarna Garden

1 Answer

Rear sprocket torque specs for a 2015 Yamaha FJ-09


Hi, Bob for this scenario you will need your service, parts fiche, and owners manual if you can't find the best tool you ever bought for your Honda, despair not, for a mere zero $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Torque Values Fluid Types Quantities Frequently Used FJ 09 Forums

17 tooth Counter Sprocket

https://drive.google.com/drive/folders/0B4ahmA7Xc3XYflR2eGN4LVJHYjZrMlNXclZtWmZ1ZUpvZFc0MjMyZkI3WC14YUU5LUxLMlE
service manual
https://drive.google.com/drive/folders/0B4ahmA7Xc3XYflR2eGN4LVJHYjZrMlNXclZtWmZ1ZUpvZFc0MjMyZkI3WC14YUU5LUxLMlE
parts manual
https://drive.google.com/drive/folders/0B4ahmA7Xc3XYflR2eGN4LVJHYjZrMlNXclZtWmZ1ZUpvZFc0MjMyZkI3WC14YUU5LUxLMlE
owners manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Aug 09, 2017 | 2015 Yamaha FJ -09

1 Answer

I need to know the torque specs, for a Husqvarna 35 or 41 chainsaw


http://www.mediafire.com/download/vl6tkv4b69eyvvh

Here is the Illustrated parts list, I didn't know if you had it or not. I've rebuilt many saw and never have I needed to torque up and nuts or bolts.

Mar 28, 2016 | Husqvarna Garden

1 Answer

2005 Kawasaki ZX-10R front and rear sprocket torque specs


Hi, Anonymous for this scenario you will need your service manual that has all fastener torque specs and a wiring diagram on the back pages, parts fiche, and owners manual if you can't find the best tool you ever bought for your Kawasaki, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Sprocket Torque Specs
Sprocket Torque Specs Kawasaki Forums
http://volksdragon.net/dusk/04-05%20ZX10R%20Service%20Manual.pdf
OEM Parts for Kawasaki
http://mybikemanuals.com/kawasaki

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Apr 16, 2014 | 2005 kawasaki ZX-10R

1 Answer

What causes the Clutch drum gear that drive the chain to go bad ? my chain eats a groove all the way through it aftr about 12 hrs of cutting I have replaced it 3 times now.


The chain you should be using should be a .325 pitch and not a 3/8.

Never over tighten the chain, it will wear and stretch with time, which is why you should regularly check the chain tension. To get it right you should be able to lift 2 drive links clear of the bar. The chain will naturally wear groves into the spur sprocket, there is no conversion to a rim spricket for this model. Rim sprockets allow the chain to move along the sprocket easier and takes the wear away form the clutch drum.

Oct 11, 2012 | Husqvarna 350 18 Inch Gas Chainsaw 52CC...

1 Answer

2005 Kawasaki KLX 250 front sprocket nut torque specs


Hi, Anonymous for this scenario you will need your service manual that has all fastener torque specs and a wiring diagram on the back pages, parts fiche, and owners manual if you can't find the best tool you ever bought for your Kawasaki, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Sprocket Torque Specs Kawasaki Forums
Sprocket Torque Specs KawiForums Kawasaki Motorcycle Forums
Kawasaki KLX250 KLX250R Service Manual
OEM Parts for Kawasaki
Kawasaki KLX250R Owner Manual

Jul 14, 2012 | 2005 kawasaki KLX 250

1 Answer

2006 Kawasaki ZZR 600 front sprocket torque specs


Hi, H2o_rider for this scenario you will need your service manual that has all fastener torque specs and a wiring diagram on the back pages, parts fiche, and owners manual if you can't find the best tool you ever bought for your Kawasaki, despair not, for a mere $17 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Sprocket Torque Specs
Sprocket Torque Specs Kawasaki Forums
Kawasaki 2000 2002 ZX600J and 2005 2008 ZZR600 Service Repair Factory... $17
OEM Parts for Kawasaki
Kawasaki Ninja Owners Manuals

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

May 19, 2011 | 2006 kawasaki ZZR 600

1 Answer

I need the to know, what is the torque spec. for the top head of a 350 husqvarna saw


The official torque figure is 9-10nm. for the allen screws securing the cylinder.

Apr 24, 2011 | Husqvarna 350 18 Inch Gas Chainsaw 52CC...

1 Answer

What are the torque specifications for the front and back sprocket of a YZF R6 2001


Hi, Kypropes for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Yamaha, despair not, for a mere $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
http://www.r6messagenet.com/forums/r6-maintenance-technical/547-front-sprocket-nut-rear-sprocket-nuts-torque-specs.html
Sprocket torque specS Yamaha R1 Forum YZF R1 Forums
1999 2002 Yamaha YZF R6 Service Manual R6 Moto Data Project
OEM parts for Yamaha
http://mybikemanuals.com/yamaha/yamaha-yz-owners-manuals

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Dec 16, 2010 | 2001 Yamaha YZF-R6

1 Answer

I am rebuilding a 261 Husqvarna chainsaw.


Arrow towards muffler.Torque is no more than 60 INCH pounds

Jan 09, 2010 | Husqvarna "Chain Saw - 16" Bar, 3 Hp

Not finding what you are looking for?
2015 Husqvarna FE 350 Logo

Related Topics:

180 people viewed this question

Ask a Question

Usually answered in minutes!

Top Husqvarna Experts

Arnie Burke
Arnie Burke

Level 3 Expert

5500 Answers

Steve Banks

Level 2 Expert

232 Answers

Joshua Jennings

Level 2 Expert

62 Answers

Are you a Husqvarna Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...