The moped starts and run smoothly for 5-10 secs and then stops. I do not know where to find the mesh fuel screen they reference in the manual.
Inside the fuel tank when the gas is pulled out.
SOURCE: motor stops running after starting
You might also find that the fuel filter is in need of a cleaning. Sitting that long can lead to a bit of rust dust in the tank, specially if you have given it a push.
SOURCE: want to acquire a chrome mesh grill
Do a Google search for ; chrome mess grill for maserati gransport 4200, then you will see MANY sources for this grill.
SOURCE: random exhaust string-like mesh??
Your catalytic converters guts have broken apart and are exiting the pipes. It's like a honeycomb lattice structure. Replace catalytic converter.
SOURCE: exhaust issue
Most likely the heat shield has corroded off and is just sitting on top of the muffler or Catalytic converter. Regardless you can remove the shield and still run the the Xterra without any problems, the OEM muffler came with a heat shield as to the after market mufflers don't have one. The Catalytic converter also has a shield and you can remove it also as the Xterra has a heat shield on the floor board it self. Most exhaust shop if honest will tell you to just remove the rattling shield if there is no exhaust leaks or no Check engine light on that monitor's the Catalytic converter's performance.
A muffler shop if shady may advise you to replace the Catalytic converter and that can go for up to and beyond $400.00, so as long as there is no leaks or check engine light on. Go right ahead and remove the rattling shield.
Thank you for using Fixya
SOURCE: exhaust issue
My 2002 xterra just developed the same problem. I have 2 of those loose metal rings. One on each side of that mesh basket thing. Did you find anything out? I was thinking of just cutting them off.
73 views
Usually answered in minutes!
×