Question about Hyosung GV 125 Aquila Motorcycles

2 Answers

Battery not charging .ive changed the strator and the regulator.

Posted by on

  • 1 more comment 
  • alpapra Aug 02, 2009

    battery is new.when i charge battery for 24hrs.at 2 amp ,i have no problem. i can ride the scooter for about 2hrs before it dies out again ,so i charge the battery again...it a pain.

  • alpapra Aug 03, 2009

    i charge the battery with a charger and battery holds the charge and when i install the battery in the scooter the battery dies out in about 1 hour[riding it.]. if the battery was bad it wouldnt hold a charge from charger ,am i correct?? . i did check the wiring and it all looks good. i tried taking negative cable off when its running and the scooter does not turn off but i do losethe headlights.

  • Randy Hough
    Randy Hough May 11, 2010

    Have you tried another battery?

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,559 Answers

Try unhooking the battery while it is running,if it dies,then the charging system is defective,if it stays running,the connections on the battery or the battery itself is defective

Posted on Aug 03, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,392 Answers

Have you checked to see if there is more than 12.5 volts at the battery when running? If you have replaced everything in the charging system, and it is still not charging, I would suspect the battery.

Posted on Aug 02, 2009

  • Eldric Venne
    Eldric Venne Aug 02, 2009

    You still have something bad then.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What or how does the battery get its charge


Most bike have an alternator driven off the left-hand crankshaft shaft.
This turns with the engine, producing the AC charging power.
This power then runs through a voltage regulator, that both converts the the AC voltage into DC voltage, and regulates the amount of voltage flowing into the remaining electrical system.

Now, you did do the first step correctly.
DC volt meter to battery terminals to see if you get 13-14 volts DC with engine running.
Next, locate voltage regulator and unplug connector for wires coming FROM the regulator, and hook up the DC voltmeter.
With engine running, you should have 13-14 (or so) DC volts.

If not, locate and unplug wires coming from alternator to regulator, and hook up AC (note change from DC to AC) voltmeter.
With engine running, should have AC voltage (this could be 20-40 volts or more).

This will let you know where the problem is, and what needs to be replaced.

Apr 25, 2014 | 1993 kawasaki KLE 500

1 Answer

Stator regulator


Try use a multimeter, and you should be able to find out.

Oct 02, 2013 | 2010 Keeway Speed 125

1 Answer

The engine light an battery light is on on my 2006 dyna


The lights being on tell me the strator or what ever is used to charge the battery is bad. The grinding was most likely that part going out. I know they don't have alternators but am not familiar with what is actually used.

Nov 27, 2011 | 2006 Harley Davidson FXDI Dyna Super Glide

1 Answer

Ive been through 4 alternators on my truck it is a 1988 mitsubishi mighty max their not charging and they keep showing low output Ive checked every wire that I can see for a short and Ive found nothing I...


not sure about an external regulator, your local auto parts store could tell you that, but i think your problem is the alternator is not grounded good, find the ground wire and trace it to where it is grounded, take the ground end loose and get a piece of sandpaper and sand the metal where it is grounded , reattach securely

Jan 15, 2011 | 1988 Mitsubishi Mighty Max

1 Answer

Its a 1990 sportster and both the front and rear brake are not working i'm charging the battery and how hard is it to change the strator


To change the starter motor is easy. This describes the Hitachi Starter Motor removal and replacement. The Bendix type is similar but fatter.
Disconnect battery!
Remove the fat battery lead from the side if the motor and hold out of the way.
Remove the nut holding the chrome cover on the motor.
Undo the two threaded bolts that hold the motor on and remove the motor.
Re fitting is the reverse.

Remove the brake callipers as a unit and inspect for damage, corrosion and pad replacements.

Hope that helps.

Jan 13, 2011 | Harley Davidson XLH Sportster 883 Deluxe...

2 Answers

My 1987 dodge w 150 wont hold a charge ive changed the alernator battery as well as the voltage regulator. when i charge the battery it holds a charge for about 5 to 6 starts


Could be a short. Have you checked the voltage at the battery with the car running? Is it over 14 volts?

Please see my tip at http://www.fixya.com/cars/r5925550-dead_battery_troubleshooting . These are generic instructions. If you get stuck or need specific instructions for your car, please get back to me with model, year and engine info.

Oct 19, 2010 | 1987 Dodge W150

1 Answer

Got my mito last weak and it would not run after a few hours of cleaning carb/charging battery/clean plug fresh petrol it started fine the next i went to take it out it started fine but when i hit 3rd gear...


Spring for a new battery pal, your's is NOT doing it's job...if you put a volt meter on it you will see.....it's toast....Good Luck to you my friend....Tim

May 12, 2009 | 2000 Cagiva Mito 125 Evoluzione

1 Answer

F&P Smart Drive #703 trouble


possible outer casing out of alinment, try lining up while doing up the bolts. Regards Engineer

Jul 08, 2007 | Fisher and Paykel GWL11 Top Load Washer

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

1,019 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyosung Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a Hyosung Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...