Question about 2002 Harley Davidson FXD Dyna Super Glide

1 Answer

2002 Low rider Starter seems to be making noise it never did before, It also seem to start the bike with a loud pop when first used. I have 45,000 miles and I did the 103 big bore kit 3-4 months ago. The last start produced a chinging sound like a metal on metal sound. gar  Gstein7617@aol.com

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 72 Answers

Did you get the high torqe starter installed when you put the big boar kit on.the factory starter doesnt like the big boar kits.if you did you may have broken teeth on starter or starter ring

Posted on Aug 06, 2009

  • homerhibbard Aug 06, 2009

    did you get the high torqe starter installed when you put the big boar kit on.the factory starter doesnt like the big boar kits.if you did you may have broken teeth on starter or starter ring

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

The bike won't start


Hi Thomas put the bike in a high gear and turn the back wheel to make sure the motor is turning over. If it is try booster cables. If that don't work follow the plus cable to the starter solonide and cross the two heavy cables with a screwdriver if the starter is still not working you will need a starter. Regards Jim...

May 12, 2015 | 2007 Suzuki Boulevard

1 Answer

Replaced battery bike started seveal tmes during a 2 week period and now it will not start. it will only make a clicking sound and it seem's to be coming from my starter. i purcheased another harley...


Yes, you need to check your charging system. First remove the battery and fully charge it (overnight) then refit, and start the bike. With the engine running at about twice the idle speed check the voltage at the battery. It should be approx 14 volts DC. If it is lower than 12.5 you should look first at the voltage regulator and rectifier. The symptoms you describe lead me to believe your charging system is the culprit. It may also be be your alternator, but check the regulator and rectifier first (cheaper)

Sep 14, 2013 | 2003 Harley Davidson FXDL Dyna Low Rider

1 Answer

1987 oldsmobile 98 makes noise when I try to start it


Sounds like your starter is starting to go, but is this is a new starter, it may need to be shimmed.

Jan 08, 2013 | Cars & Trucks

2 Answers

How do I hotwire my 78 shovel head?


Run a wire from the postive side of the battery to the top side of the coil. There should be two white wires on the top side of the coil and a black wire on the bottom. Once there, you can kick start the bike. If you want to use the electric starter, pop the rubber boot off starter solenoid and jump from the large top lug to the small lug in the middle to engage the starter.

Or, you can purchase an aftermarket switch and change out the switch. You need a 6-lug switch for you 78.

Apr 27, 2010 | 2002 Harley Davidson FXDL Dyna Low Rider

1 Answer

I have value train niose in the front head 2002 low rider is this normal


Depends. You will get some valve noise as the bike gets older, however, this noise is only noticable at Idle. If you are getting a loud enough noise at crouse speed to the point of being annoying then the chances are you have a lifter that is starting to collapse. This is upper end noise only. If you are getting a lower end noise and have at least 30,000 miles on the bike. Chances are the valve drive chain tensioners are going. This is a known problem with twin cam engines. I have two twin cams and had to replace the tensioners on both. My advice to you if this is the problem is to go to Gear Drive cams. I did it without any regrets. I have a quicker power response and was able to increase my rev. limit speed by almost 200 rpms. The down side according to some is a wining noise. I don't get any noise I can hear over my Python 3 pipes. In my opinion the benefits out weigh the noise. Without having the bike in front of me this is the best I can suggest.

Apr 25, 2010 | 2002 Harley Davidson FXDL Dyna Low Rider

1 Answer

Why does my dodge grand garavan make loud noise


could be a problem with your flywheel or if the starter was just replaced and you started hearing the noise then it could have to be shimmed out from the flywheel. Could be a starter issue.

Jan 28, 2010 | 2001 Dodge Grand Caravan

1 Answer

Intermittent, random, loud popping noises.


you have a problem with your amp. most likley the finals are passing dcv intermitently to the load.

May 28, 2008 | Audio Players & Recorders

Not finding what you are looking for?
2002 Harley Davidson FXD Dyna Super Glide Logo

173 people viewed this question

Ask a Question

Usually answered in minutes!

Top Harley Davidson Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

Gills Lango

Level 2 Expert

195 Answers

Mike

Level 3 Expert

4336 Answers

Are you a Harley Davidson Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...