My son has a 99 FXDWG. I need torque specs for everything on the motorcycle. We are leaving this weekend on a 3000-mile road trip. Thank you @
SOURCE: Engine Bolt Torques- 2005 Chevy Impala/3400 Engine
Head Bolts
Step one 37 ft lbs then tignten 120 degrees more
Rocker arms
Step one 11 ft lbs then tighten 90 degresss more
Upper intake
89 inch lbs
Lower intake
132 inch lbs
SOURCE: Torque Spec for '99 Chevy C1500 5.7L engine lower intake manifold
On 5.7L engines, install the bolts and torque in sequence as follows:
SOURCE: Need to the torque specs for a 1999 Dodge Durango
Head Torque sequence
Step 1: torque to 50 Ft/Lbs
Step 2: torque to 105 Ft/Lbs
recheck final torque in sequence.
Torque intake manifold:
Step 1: 12 inch/Lbs, (hand tight)
Step 2: 72 inch/Lbs, (6) Ft/Lbs
Step 3: 12 Ft/Lbs
torque intake plenum:
Step 1: 24 inch/lb (hand tight)
Step 2: 48 inch/lb (4) Ft/Lbs
Step 3: 84 inch/lb (7) Ft/Lbs
(To torque bolts, start in center using crisscross
pattern)
SOURCE: will a gas tank off a 5 harley dyna wide glide
It sure will!! You answered your own question. guess i get no points for this one.
SOURCE: need cylinder head gasket torque specs.
looks like there is special sequence to reassemble and tightening, a quick note replace any bolts that have two punch marks.tighten as follows: x x x x x 10 4 2 6 8 x x x x x 7 5 1 3 9 torque all down to 15 ft lbs torque to 30 ft lbs plus 90 degrees. Good luck!
839 views
Usually answered in minutes!
×