Question about 2004 kawasaki KX 250 F

1 Answer

2004kx250f won't kick start, can push start. popping when decelerating, won't idle

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 15 Answers

Idle jet has probably got blocked, there are two jets, an idle and a main, when your bump starting it is most likely using the main jet and when you decreas the throttle it is coming onto the blocked idle jet. take the idle jet out of the carb and check it.
steve

Posted on Aug 01, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I have a 2000 CR 250, has always ran perfect and now will not start or fire. It has spark and is getting fuel to the carb(cleaned it spotless) air filter clean also. Fuel is fresh (use non-ethanol Supreme)...


Try starting it with a brief spray of ether into the intake. If it runs briefly it indicates a fuel/carb problem.

If it doesn't run the problem could be spark related, poor induction due to crank seals or other air leaks or perhaps oil is settling in the crankcase and corrupting the incoming charge.

Mar 12, 2017 | Honda CR 250 R Motorcycles

1 Answer

Deceleration popping on a fuel injected bike


Hi Anonymous, popping, coughing, spitting, or backfiring through the carburator or induction module can be caused by air getting sucked in combustion chamber do bad intake seals leaking. Leaking exhaust gaskets can also be suspect. Remove air cleaner and backing plate, while engine is idling spray WD-40 or Brake Kleen around intake manifold to head area, if RPM's increase you have an intake leak and seals need to be replaced, also spark plugs will be burning whiter than normal. Good luck

Jun 10, 2013 | 2005 Harley Davidson FLHTCUI Electra Glide...

1 Answer

My C50 Intruder Volusia backfires when decelerating.


If it has aftermarket free flowing pipes on it, it is due to the unburnt fuel popping in the header. You just didn't hear it before because the mufflers muffled it. Otherwise, I would reccomend you check for an exhaust leak

Jun 03, 2013 | Suzuki Motorcycles

1 Answer

Bike pops and won't start.runs good a month ago but won't start now


check out the jets or the needel valve you mite have some stuff on it

Feb 20, 2013 | Motorcycles

1 Answer

72cc pitbike kick start won't come back up after you kick it down ...?


mate whats happening is there is no recompression inside the engine pushing the gear to return id say you have done the gears in it and it would cost more to replace them than to replace the engine

Jan 28, 2013 | Pit Cycling

1 Answer

When I push the arrow up to make my heater kick on a 1+2 pops up above the temperature number and it won't kick on.


sounds like your touchscreen is messing up and your adjusting the T-factor.. try pushing the reset button on your thurmastat.

Feb 26, 2012 | Heating & Cooling

1 Answer

I have a 2005 tc 250 and it refuses to kick over. I put a battery in it and it started then died after 2 mins of idling. Battery died so I tried kicking it at tdc, will not start. Fuel is on, choke in or...


Have you checked for a spark? or done a compression test? You may need to adjust the idle screw or tick over screw slightly 1/4 turn at a time (remember where you started.)

Jan 27, 2012 | 2005 Husqvarna TC 250

2 Answers

Car quits at stopsigns without notice


It is choking out at idle..
It could be the fuel finlter.. Try replacing it..
And the air filter too..

Have a great day..

Sep 28, 2009 | 2005 Kia Sportage

1 Answer

No idle &bacfires on deceleration


hi mate on the carb you will find 2 screw 1 is for the idle and the over is for mixture the idle one will be the furthest out screw it in 1/4of a turns will the engine is running this will take the idle up on the engine and the backfiring is fuel in the exhaust not being burnt so on the over screw on the carb screw that in 1/4 of turns this will decrease the amount of fuel going into the engine if it still backfires screw it in 1/4 of turns again and see what difference it makes good luck

Jul 10, 2009 | 2004 kawasaki KX 250 F

Not finding what you are looking for?
2004 kawasaki KX 250 F Logo

Related Topics:

213 people viewed this question

Ask a Question

Usually answered in minutes!

Top kawasaki Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4535 Answers

yadayada
yadayada

Level 3 Expert

76630 Answers

bazzz7071
bazzz7071

Level 2 Expert

342 Answers

Are you a kawasaki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...