Question about 1995 Yamaha FZR 600

2 Answers

I got a 93 fzr 600 and when u go to turn on the high beam headlights they cut off. i changed the left side switches and still doesnt work. what do i do know?

Posted by on

  • warrior350_0 Aug 11, 2009

    yea i changed both bulbs and the left handle bar swtiches

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

Again check ur ignitor unit and there is also a regulator under the seat close to the reservoir cant remember exactly. this all ties in to electrical. voltage regulator i believe it was. good luck

Posted on Aug 31, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 89 Answers

I take it you checked the bulbs. Leaves you with relay or wiring problem.

Posted on Aug 03, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Driver side low and high beam on but dim. Passenger side low beam normal but high beam on and dim


I would check for the groundwire continuity

Driver side - dim low beams and no hi beam - Subaru Outback ...

www.subaruoutback.org > ... > General > Electrical & Electronics
Oct 11, 2014 - Hi everyone, My drivers side headlights are dim on low, (car has separate bulbs ... When the headlight switch is turned ON, but for low beams, ...

Driver-side Low beam Not Working (electrical issue not bulb ...

www.hummer4x4offroad.com/.../showthread.php?...Driver-side-Low-be...

Mar 12, 2015 - 10 posts - ‎4 authors
The high beam continues to work on both sides...I pulled the Driverside headlamp fuse and then both left and right beams lit up but very dim.

High beams ok, but not low beam - one side only - TDIClub Forums

forums.tdiclub.com > ... > VW MKIV-A4 TDIs (VE and PD)
Jan 23, 2014 - My driver's side lights are working fine - high and low beams. ... But it definitely looks like the big lamp on the driver's side gets brighter when ..... Drivers side headlight is very dim on low beam and goes out when on high beam ...

Dim driver's side headlight (low & high beam) - GrandAmGT.com Forum

www.grandamgt.com > ... > Technical Q&A

Dec 11, 2002 - 6 posts - ‎4 authors

Jan 04, 2016 | Cars & Trucks

2 Answers

Why doesnt headlight work on low beam left side?


Bulb may be no good as in headlight bulbs one filament can go leaving only either low beam or high beam operational on one headlight so change the bulb first on that side other than that could be power related

Apr 17, 2015 | 1999 Volkswagen Beetle

1 Answer

Why are my headlights cutting out when i turn my high beams on?


The problem will be due to a malfunctioning headlight dimmer switch and a dimmer switch connector. Also check the high beam connector.

Jul 14, 2013 | Ford Futura Cars & Trucks

1 Answer

Headlights stopped working


Hi, Justin_elm if your headlight is not working, keeps burning out or is dim the first thing you need to check is the headlight bulb for damaged filaments then check your light circuit fuse, that being said the usual suspects are:
1. Faulty ground or power supply wire to headlight bulb socket.
2. Worn, chaffed, or broken wires in the light circuit.
3. Corroded, broken, or loose pins/sockets in wire connectors.
4. Faulty hi/lo beam switch.
5. Faulty ignition switch.
6. Fuse is good but no continuity on both sides.
7. Faulty wiring between battery positive and headlight bulb socket.
8. Weak charging alternator/generator.
9. Faulty voltage regulator/rectifier, overcharging.
For more information about your issue and valuable "FREE" downloads that you will need please visit the websites below. Good luck and have nice a day.
Headlights not working The FZR Forum
View topic 1995 FZR 600r Headlights stopped working please help
https://www.tradebit.com/filedetail.php/269137237-yamaha-fzr600-1989-1999-factory-service-repair-manual
OEM parts for Yamaha
http://www.fzrarchives.com/fzr600/600_manual/1999fzr600r.pdf

Jan 09, 2013 | 1993 Yamaha FZR 600

1 Answer

2007 gsxr headlight went out...all other lights work,


Low beam switch may be bad. use a meter to check for power to lowbeam side of lamp. cleaning with electrical contact spray may help.

May 05, 2010 | 2007 Suzuki GSX-R 600

1 Answer

93 Camry Headlight Switch


From the symptoms you describe it sounds as though your headlamp switch is dirty, broken or out of adjustment. I would disassemble it and find out what is going on.

Oct 23, 2009 | 1993 Toyota Camry V6

1 Answer

My 1992 Corolla DX headlights won't come on! I have changed the fuses and the bulbs. The relay clicks when turning the switch and the wiring seems to be in good condition but I am no electrician. The...


Power flows from the battery to the main fuse. Then it flows to the control coil and contact side of the headlight relay. When you turn on the headlights, the headlight switch provides ground to the control coil in the headlight relay and that operates the contacts. The contacts allow power to flow to the right and left hand headlight fuses. Power flows to the headlights. The headlight switch is what provides ground to the high and low beams on the headlights.

To diagnose, remove the headlight relay. Using a voltmeter, check for battery voltage on terminals 3 & 4 in the socket with the key in the RUN position. Then turn on the low beams. Test for good ground on terminal 1 in the socket. If you're not getting ground, then you've got a problem with either a bad headlight combo switch or a bad ground. If you get good ground on terminal 1, reinstall the relay, turn on the low beams and test for power in the headlight sockets. If you get battery voltage, that confirms you've got good fuses and wiring up to that point. Next, check for good low beam ground on the red/green wire in the bulb socket. If you're not getting good ground, it's either a bad combo switch or bad ground from the combo switch. Then turn on the high beams and check for good ground on the red/yellow wire in the bulb sockets.

It wouldn't hurt to clean the ID ground on the left side of the instrument panel, but based on everything you've said so far, this sounds like a bad combo switch

Jul 26, 2017 | 1992 Toyota Corolla

1 Answer

Only one headlight is on.... Is that right?????


That is correct,The one light is a daytime driving light to make it easier for traffic to see you coming.It also works as the low beam a night,The high selection turn both on.

May 07, 2009 | 1989 Yamaha FZR 600

2 Answers

Horn and Highbeams not working


Hi!
Have you taken a look at the switch? I'm a Harley Guy, the Horn and High beam switch are located on the same bank so a clean with a bit 'O' WD might do the trick?? did for me.
Good Luck!
Paul 'W'
Onyer~EDson(:0) {#><U.K.

Jan 16, 2009 | 1995 Yamaha FZR 600

Not finding what you are looking for?
1995 Yamaha FZR 600 Logo

160 people viewed this question

Ask a Question

Usually answered in minutes!

Top Yamaha Experts

dhnguyen

Level 2 Expert

281 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1144 Answers

Tony

Level 3 Expert

2600 Answers

Are you a Yamaha Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...