Bike would not startwhen start button pushed. would have to move bike for bike to start. last night bike would not start and I lost all power(lights etc) replaces master fuse and then checked all others nothing.

Unplug the power coming from the wall wait 30 sec then plug it back in then try.
Terry

charging system needs to be checked. runs good till the battery looses power then the bike starts loosing spark and or fuel injection starts to fail

Check to see if Inertia switch tripped. It would be either in the trunk or behind the floor kick panels. It has a push button reset.

Relays can sometimes have bad contact points and kick out. The TPS sensor can have a bad connector.

Test your fuel pressure at the test port, test the fuel injector harness for signals.

At least you have a chance now to determine if it is a fuel or spark problem.

Does it do this in all setting on the dial, normal,heavy ,delicate?

remove the power chord, plug it back in and make sure it is properly inserted.

This may be your timer or your start switch may be bad. Hope this helps!

It's the motor.

I believe you have lost a leg of power.Check you breaker and then the wiring in the back of the dryer.

i can' turn on my sony tv . no lights are blinking. nothing. could something when it was moved.

Re-explain please.