Question about 2004 Honda VTX 1300

1 Answer

Removing baffles in my1300 vtx c honda ?

Removing baffles in my1300 vtx c honda ? how hard is it ? any problems with it ?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 87 Answers

It is not hard to do but it would be best to get the drag pipes. there are a host of problems to think of though. you will need to rejet the carbs to accomodate the free up in back pressure. you will need the tourque slipins for the pipes. they will fit right into the pipes where they connect at the heads. the 1300 is going to be super loud without the baffels. like getting stopped by the law loud. it would be best to get a tuned drag setup from a dealer as to get the sound you are looking for as well as keep it below jonnie laws radar.

Posted on Aug 04, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Vtx spark


My 1965 XLCH didn't either!
Check the electrics first.

Jun 01, 2017 | Motorcycles

1 Answer

How many baffles r in vtx 1800r exhaust?


Usually a baffle is made from one piece of material.

Mar 21, 2011 | Honda VTX 1800 R Motorcycles

1 Answer

How do I remove the emissions from a 2005 Honda vtx 1800


Go here: http://tech.bareasschoppers.com/engine/vtx-1800-desmog/
All the info you need.

Aug 20, 2010 | 2005 Honda VTX 1800

1 Answer

How do you remove the seat from 2002 honta 1800


Should be a bolt at the rear of the seat ...

Apr 17, 2010 | 2004 Honda VTX 1800

1 Answer

Honda vtx change battery. How?


Remove the seat for access to the battery compartment. For more information look here: http://hrca.honda.com/

Mar 30, 2010 | 2004 Honda VTX 1800

1 Answer

Can baffes be replaced without replacing omplete exchaust pipes .1 993 vtx shadow.the baffles had been drilled out .I WOULD like the sound to be quite.


new pipes needed,,,its a stupid thing to do to rip out the baffles it only makes the bike run very week and it then go's a lot slower??? see stupid hu?

Mar 28, 2010 | 1993 Honda VT 600 C Shadow

3 Answers

My Honda VTX 1300 backfires when I close the throttle or when I shift down. What should I do. It sounds like a gun shot


Your bike is running lean (too much air and not enough fuel). What, if any, modifications have you done to the bike? If you changed the exhaust out for louder pipes, you need to adjust the f/a (fuel/air) mixture in the carburetor to compensate for more air going through the bike. Let me know here if you have made any type of mods to the bike.

Nov 18, 2009 | 2004 Honda VTX 1300

1 Answer

2004 honda vtx 1300 c stalls out after down


ever drain your carbs ? should be done seasonally . fuel filter problem, sounds like it is running out of gas.

Oct 10, 2009 | 2004 Honda VTX 1300 Retro

1 Answer

Removing the rear wheel of a Honda VTX 1300s


ok first you got to find the link that takes the chain apart after you do that loosen the bolts that hold the tire on if you cant do that you can use a breaker bar or put a pipe or on the end of you rachet that will give you more leverage. then sloed the tire forword so you can undo the chain and slide tire off

Jun 04, 2009 | 2004 Honda VTX 1300

1 Answer

2006 Honda vtx 1300 back fireing after i change the excuast pipe no baffles


Since you removed all of the back pressure,You will need to have the carb and timing adjusted to match the new exhaust flow

May 13, 2009 | 2005 Honda VTX 1300 R

Not finding what you are looking for?
2004 Honda VTX 1300 Logo

981 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

yadayada
yadayada

Level 3 Expert

74945 Answers

Gino Cussen
Gino Cussen

Level 2 Expert

216 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...