Question about Harley Davidson VRSCD Night Rod Motorcycles

1 Answer

We have a 2006 night rod with 6,500 miles on it. The bike when new had a vance n hines fuel pack installed, wide tire kit and the label for fuel pack settings indicates it was done for d&d pipes. The current pipes were re-installed by a previous owner and appear stock. Our mechanic thinks it does not have any where near the power of other v-rods he has riden. I have removed the fuel pack until we can verify what pipes are on it per vance recommendations. As far as the power question any thoughts on checking compression or valve adjustments? Thx Todd

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 867 Answers

Im sure the valves and compression are good. as for changing pipes, the computer will adjust for it to a certain point. bringing everything back to stock will probably increase your power. if you want to keep the pipes and fuel pack, i would buy an after market ignition module as well

Posted on Jul 30, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2006 Dyna Wide Glide when it was new I had the dealer install Screaming Eagle exhaust and a stage 1 download, now I would like to install a Vance and Hines short shot exhaust, do I need to change...


Hi, Feny50 I would really love to help you with your bike question but due to the magnitude of yesterday's solar flare the batteries in my crystal ball are dead and my mental telepathy headset circuitry was melted which forces me to make an educated guess, I would install the new exhaust and take for a ride there is a possibility that it will run great if not then get another remap or readjust the fuel tuner you reference too or purchase a fuel tuner and adjust it yourself.
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below and for more specific information or questions at no charge please feel free to contact me at xlch@mail.com. Good luck and have a wonderful day.
POWRPRO BLACK Behind the Scenes Inside Cobra Cobra USA
Harley Davidson Dyna Glide Twin Cam 88 Service Manual
http://partsfinder.onlinemicrofiche.com/ronnies/showmodel.asp?make=hdmc
http://mybikemanuals.com/harley-davidson/2006-harley-davidson-owners-manuals
Instant Tech Relief To speak to me personally absolutely "FREE"

Jun 27, 2017 | 2006 Harley Davidson FXDWGI Dyna Wide...

1 Answer

2006 Honda Shadow aero 750 Problems starting


If the problem start after putting Vance & Hines Pipes, then try to sync the carbs, if not possible (meaning turning the sync screw all the way and cant sync them), reJet the carbs with 1up, slow and main Jet.

Apr 25, 2014 | 2005 Honda VT 750 Shadow Aero

1 Answer

I put a Vance and Hines exhaust on my xl1200x about 2k miles ago and did not install a fuelpak. What problems will this create and will I have to do a rebuild? What would I need to rebuild?


Adding an exhaust system should not adversly affect your motor just the performance, rebuild? nooo, if this system was made to run its best with the fuelpack add the fuel pack.

Oct 29, 2012 | Motorcycles

1 Answer

It has a vance & hines fuel pack, vance & hines big radius exhaust..k&n air, s/s cams..for 2 yrs..running great til..2 months ago..start bike in a couple of min..it turs off..the start it about...


Hi Litebeer_99, and the usual suspects are:
1. Severely discharged or damaged battery.
2. Loose, corroded or broken battery cable.
3. Alternator not charging or below normal rates.
4. Failed ignition coil, ignition/electronic module.
5. Failed CKP, CPS, CMP, MAP, TPS, or BAS sensor.
6. Faulty ignition switch.
7. Water or dirt in fuel system, carburetor or filter.
8. Fuel tank vent system plugged or gas cap not venting.
9. Fuel tank empty.
10. Fuel valve vacuum line broken or carburator vent line closed off.
11. Restricted, blocked or kinked fuel line.
12. Failed fuel pump, pressure regulator and or fuel injectors.
For a prime suspect please visit website below and good luck:
Big Twin Carb EFI DTC Intructions codes Harley Davidson Forums Harley...

Jun 27, 2011 | Harley Davidson FXDWG Dyna Wide Glide...

1 Answer

Low rpm loss of power with aftermarket vance and hines pipes


If you have carburetors you need to install a jet kit. If you have a fuel injected bike you need to add a Power Commander and program it for the changes you have made to the intake side of the engine. Make sure you installed all new exhaust gaskets or you will have lots of popping and back firing.

Jan 31, 2011 | 1996 Honda VT 1100 C2 Shadow Sabre

1 Answer

Hard to start when hot


It sounds like you fuel map is wrong. Motorcycle are extremely sensitive to any changes you make in the intake or exhaust system. Sounds like you need to take your bike and have it put on a dyno to figure out the new map for your fuel. I'm not familiar with the the Vance & Hines fuel pack. Sorry I couldn't be of more help, Good Luck, Steve

Apr 29, 2010 | 2000 Harley Davidson FLHTCUI Electra Glide...

1 Answer

2007 night train vance & hines pipes & fuel pack w/K&N air filter. Just discovered oil on top of rear cylinder


It probably isn't oil, it's more than likely fuel mixed with carbon due to running too rich. check your settings on the fuel pak.

Jun 09, 2009 | 2000 Harley Davidson FXSTB Night Train

3 Answers

Backfire and popping after installing vance & hines longshots


Let me know via baxr09@yahoo.com.au if you get a solution, Mine is doing similar but mine is holding back at half throttle to, Wont rev high at all just chokes under load

Apr 17, 2009 | 1999 Honda VT 1100 C3 Shadow Aero

1 Answer

Vance and Hines


Whenever I have a question about an aftermarket part - I contact the manufacturer, they are very helpful, but to answer your question, In general, if u get the correct part for your model bike, it should mount the same as the OEM part you;re replacing

Jan 25, 2009 | 2000 Harley Davidson FXDWG Dyna Wide Glide

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

159 people viewed this question

Ask a Question

Usually answered in minutes!

Top Harley Davidson Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4536 Answers

Mike

Level 3 Expert

4340 Answers

yadayada
yadayada

Level 3 Expert

76848 Answers

Are you a Harley Davidson Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...