Question about 1989 Yamaha FZR 1000

1 Answer

Bike have problem to start when it was in the rain or after the bike was washed

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 57 Answers

Hi,
this happens because the water enters in the engine jacket and the carburettor of the bike.

check the carburattor ,whether it is passing current or not.

if it is faulty replace it.and if it is ok then remove carburattor an kich your bike atleast 50 times with a piece of cloth in the place(hole) where carburattor is fixed,so that the cloth takes away all the water drops which comes out when you kick your bike.
Also check all the gaskets of the engine.

Do all these your problem will be over

cheers

Posted on Jul 30, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Piaggio X9 will not start after being in the rain


Hi, Bob moisture, condensation, rain, or bike washing can make the bike run sluggish, not able to rev, and misfire. Older bikes, engine configuration, and exposed electrical components are at the front of the line for acting up. During the diagnostic procedure spray Electrical Contact Cleaner on corroded wire connectors/pins/sockets etc. and apply a liberal amount of "DIELECTRIC" grease to the mating harness/wire connectors. WD40 works great for eliminating suspect areas in your quest to find the real offending gremlin.
For additional insurance you can spray a High Temp Clear Coat on the most vulnerable areas it will work like Scotch Guard does on fabric. Fabricate a rubber or plastic splash guard to deflect water coming off the front wheel getting to the front cylinder spark plugs. The design should be adequate for its purpose with the least amount of airflow restriction to cool the cylinders. The usual suspects are:
1. Air filter soaked with water.
2. Water in the fuel system gas tank and carburetors.
3. Wet ignition coil packs.
4. Spark plug boots wore out or loose allowing water to enter.
5. Spark plug cables old and cracked check for spark leakage in the dark.
6. Spark plug wells filled up and drain holes clogged.
7. Water in a wire harness that has exposed open ends and have a sharp bend or crimp allowing the liquid to form its own pool of potential threats to chaffed wiring.
8. Sensitive fuel tuners and downloaded ECM remaps may get confused with the abnormal cylinder temperature difference in a V-4 engine configuration.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Scoot wont start after rain
02 X9 500 rain damage drained battery wont start
Piaggio 633234 Workshop Manual
Piaggio X9 EVOLUTION 500 2004 Parts
PIAGGIO X9 Evolution 500 User Manual

Oct 29, 2017 | Piaggio Motorcycles

1 Answer

HONDA GL1500 wont start when it rains


Easy! moister is getting into your electrical system. Sounds like its starting at your switches and probably just need to pull the switches apart, clean the contact points and apply a little grease. Your best bet is to not let the bike get soaking wet, cover it and and only wash it by wetting a towel and not spraying it with a hose.

Jul 19, 2013 | Motorcycles

1 Answer

I have a honda EX5 (GN5 engine) which is single cylinder and single cam.. the problem is,it's suddenly start to sputter after a ride in a heavy rain.. the idle is a little slack on it,sometimes it...


Hi, Saisoku this happens to a lot of bikes and different brands it is usually caused by water getting into the fuel system and/or moisture getting to electronic components, wire connectors, wiring harness. This situation usually clears itself by letting the bike sit for a couple of days in the sun. For more information about your question please click on the blue links below. Good luck and have a wonderful day.
intermitent running rough in heavy rain
Bike runs poorly in after hard rain
bike won start after heavy rain
bike runs terrible after rain
Running Rough After the Rain

Apr 06, 2017 | Honda Motorcycles

1 Answer

2000 Honda CG 125 Cargo stops in the rain and wet conditions


Hi, Anonymous moisture, condensation, rain, or bike washing can make the bike run sluggish, not able to rev, and misfire. Older bikes, engine configuration, and exposed electrical components are at the front of the line for acting up. During the diagnostic procedure spray Electrical Contact Cleaner on corroded wire connectors/pins/sockets etc. and apply a liberal amount of "DIELECTRIC" grease to the mating harness/wire connectors. WD40 works great for eliminating suspect areas in your quest to find the real offending gremlin.
For additional insurance you can spray a High Temp Clear Coat on the most vulnerable areas it will work like Scotch Guard does on fabric. Fabricate a rubber or plastic splash guard to deflect water coming off the front wheel getting to the front cylinder spark plugs. The design should be adequate for its purpose with the least amount of airflow restriction to cool the cylinders. The usual suspects are:
1. Air filter soaked with water.
2. Water in the fuel system gas tank and carburetors.
3. Wet ignition coil packs.
4. Spark plug boots wore out or loose allowing water to enter.
5. Spark plug cables old and cracked check for spark leakage in the dark.
6. Spark plug wells filled up and drain holes clogged.
7. Water in a wire harness that has exposed open ends and have a sharp bend or crimp allowing the liquid to form its own pool of potential threats to chaffed wiring.
8. Sensitive fuel tuners and downloaded ECM remaps may get confused with the abnormal cylinder temperature difference in a V-4 engine configuration.
If your bike will not run right or even start after going through the checklist, despair not, letting it sit for a couple of days in a warm environment is like an eviction notice for the Gremlins and then your bike will be back to its old self.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Motorcycle dies in the rain motorcycles
bike won start after heavy rain
CG125 $15
https://www.partsfish.com/page/oem-parts-for-honda
http://mybikemanuals.com/honda

Jan 14, 2013 | 2000 Honda CG 125 Cargo

1 Answer

Kawasaki vulcan 1600 not charging after riding in rain


get a volt meter and check the three yellow wires coming out of stator / generator. All should read over 12.6volts, all should have same voltage. if not, chevk plug connections for burning or, if they are good, pull out stator for testing.
If stator is good, replace voltage regulator unit, usually under seat near battery.

Jul 27, 2017 | kawasaki VN 1500 Vulcan Classic...

1 Answer

2011 Honda CB Unicorn stalls while riding in the rain


Hi, Marindra_18 moisture, condensation, rain, or bike washing can make the bike run sluggish, not able to rev, and misfire. Older bikes, engine configuration, and exposed electrical components are at the front of the line for acting up. During the diagnostic procedure spray Electrical Contact Cleaner on corroded wire connectors/pins/sockets etc. and apply a liberal amount of "DIELECTRIC" grease to the mating harness/wire connectors. WD40 works great for eliminating suspect areas in your quest to find the real offending gremlin.
For additional insurance you can spray a High Temp Clear Coat on the most vulnerable areas it will work like Scotch Guard does on fabric. Fabricate a rubber or plastic splash guard to deflect water coming off the front wheel getting to the front cylinder spark plugs. The design should be adequate for its purpose with the least amount of airflow restriction to cool the cylinders. The usual suspects are:
1. Air filter soaked with water.
2. Water in the fuel system gas tank and carburetors.
3. Wet ignition coil packs.
4. Spark plug boots wore out or loose allowing water to enter.
5. Spark plug cables old and cracked check for spark leakage in the dark.
6. Spark plug wells filled up and drain holes clogged.
7. Water in a wire harness that has exposed open ends and have a sharp bend or crimp allowing the liquid to form its own pool of potential threats to chaffed wiring.
8. Sensitive fuel tuners and downloaded ECM remaps may get confused with the abnormal cylinder temperature difference in a V-4 engine configuration.
If your bike will not run right or even start after going through the checklist, despair not, letting it sit for a couple of days in a warm environment is like an eviction notice for the Gremlins and then your bike will be back to its old self.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Rain stalling my bike
Bike Stops in Heavy Rains
HONDA UNICORN CBF 150 BIKE WORKSHOP SERVICE REPAIR MANUAL Download Manuals... $15
https://www.partsfish.com/page/oem-parts-for-honda
Honda CB UNICORN DAZZLER 2010 Owner Manual

Jun 17, 2012 | 2011 Honda CB Unicorn

1 Answer

Bike have problem starting after washed or standing in rain


check plug wire for good connection and for cracks

Jul 30, 2009 | 1989 Yamaha FZR 1000

Not finding what you are looking for?
1989 Yamaha FZR 1000 Logo

Related Topics:

70 people viewed this question

Ask a Question

Usually answered in minutes!

Top Yamaha Experts

Tom

Level 2 Expert

314 Answers

dhnguyen

Level 2 Expert

281 Answers

vince

Level 3 Expert

1214 Answers

Are you a Yamaha Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...