Question about 2005 Bajaj Pulsar 150

2 Answers

The engine stops automatically while riding......

I have made it check from the mech. but he says there is no problem .the fuses are clean everything is alright....

Posted by on


2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Hey me too got the same problem. Got it fixed by changing a small coil. Don;t remember the name though. It is a small coil with a pair of wires and socket. Take it to a good service centre and they may be able to replace that

Posted on Oct 08, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 232 Answers

Actually this is common problem with the old bajaj machine. If you want to to be fixed you need to change the engine oil before going for a long ride. Use castrol power engine oil. Check the clutch plate setting. If it need any change replace it with new one. All these ll make your engine cool and avoid stopage. Hope this helps. Please rate this!!

Posted on Aug 16, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

4 Answers

With the key on, engine running the is no power to any of the accessories windows, or blinkers. when i jump the battery, everything works, I remove the the jumper and everything stops working and the

You have the voltage and proof that the Alternator is charging with the correct volts but what you have not got is amperage you need to get the battery tested and I believe by your own description you know that your battery is US.

Jan 05, 2015 | 2009 Ford Focus

2 Answers

Cutter stopped while mowing

Check your fuse, use a ohm meter to check fuse or a new one.

Apr 17, 2014 | Mtd Garden

1 Answer

No brake lights on 99 chevy cavlier

So you changed the brake switch under the brake pedal. It's a simple momentary switch. Did you check it for power to the connector before you changed it? You checked the fuses under the dash and under the hood of the car? It's pretty straight forward as far as the brake wiring is concerned. Did you remove the bulbs and make sure your sockets are clean and free of corrosion? Did you hold the brake down with a brick or something and go to the tail lights and use a meter on them for power? Did you look under the brake pedal and actually see the switch actuating back and forth as you pushed the brake pedal? Oh and don't check the fuses visually, use a volt meter. Sometimes they look good but aren't.

Nov 09, 2013 | Bikers Choice Mech Stop Light Switch Hd Xl...

3 Answers

My geo metro egine have a ticking sound

If you have adjusted your valves and the ticking persists then try changing your exhaust manifold gasket. A leaking exhaust manifold gasket will often make a loud ticking sound.

Sep 19, 2011 | 1997 Geo Metro

1 Answer


does your check engine light come on then go off? it could be a fuel injector canistor has some carbon build up. a volvo mech can clean it in about 20 minutes.

Aug 07, 2010 | 2000 Volvo S80

2 Answers

My 2006 Chevy Avalanche's check engine light came on last weekend. We checked the fuses, the air filter and the gas cap. The light went out. Then my truck slowly exhilerated in drive. It's automatic. It...

All these code's are to your transmission, your mech needs to do more then pull code's, he needs to look at date on sensor to transmission before opening.

P0740 - Torque converter clutch solenoid circuit

P0758 - Shift solenoid (B) electrical

P0785 - Shift timing solenoid

P0761 - Shift solenoid (C) performance or stuck off

I would try Trans - X first pores right in to trans.

Jan 15, 2010 | 2006 Chevrolet Avalanche

1 Answer

2003 matrix my dash lights went out and the heat stop working , car would start but wont **** into gear helpp please

when you say Heat stopped working you mean the blower stopped working or it started blowing just cold air. 2 very different situations. based on everything else I assume you mean you basically lost power to your dashboard. You need to check the fuses under the hood and for shorts. If all is good you will need to take it to a mech to have it checked as the only other thing that is common to all these problems is the ECM.

Dec 12, 2009 | 2003 Toyota Matrix

1 Answer

Saab 900 Automatic (not starting)

Your Neutral Safety Switch is bad.

Apr 08, 2009 | 1996 Saab 900

Not finding what you are looking for?
2005 Bajaj Pulsar 150 Logo

183 people viewed this question

Ask a Question

Usually answered in minutes!

Top Bajaj Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

4974 Answers


Level 1 Expert

8 Answers

Are you a Bajaj Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides