Question about 2004 Suzuki GSX-R 750

1 Answer

Hi there I have got a Suzuki GSX-R600 2002 the ODO reading is not showing up with how many kilometers you have done and also on both trip meters, it has lines across where the numbers are suppose to be flashing all the time. Everything else is working fine clock, temp, speed are all showing as normal, just showing lines across the reading I did a service on the bike took of the front sproket cover and cleaned behind there now the reading has gone any ideas would be welcomed. Thankyou

Posted by on

  • DArrin Honeysett Jul 30, 2009

    Hi there I have done this could the switch itself be faulty I have unplugged the switch and plugged it back in still the same problem. Does this switch do both jobs as doing the speed and displaying the kilometers, I just need to know so I can go and purchase a new sensor. Thankyou for your information



1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert who has answered 20 questions.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 20 Answers

The speed sensor is probably tampered with.. remove your seat, lift your tank and look on the left side behind the motor. look for a black connector with 3 pins that should be tight.

Posted on Jul 30, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Maint. required light wont go off in 2008 toyota tacoma

It needs to be reset, here is how to do it:
turn the key on
set the odo/trip meter to read odopush and holsd the RESET switch
turn the key off while holding the switchturn the key back on
some lines will flash on the display
when the odometer reading comes back release the switch

if this doesn't work use the "trip A" setting instead of ODO
either one should work

Feb 24, 2013 | 2000 Toyota Tacoma PreRunner

1 Answer

Just purchased a 08 r1 and cant get the milage to show up

One button is the "select" with which you change from ODO to TRIP and back. And the other button is "reset" to reset your TRIP meter.

Feb 10, 2012 | Yamaha Motorcycles

1 Answer

How to reset kilometer reading of toyota prado 2006

Dear Press the ODO meter button and turn the car into on mode but be carefull don't start the car your kilometer will flshes and then it will be reseted

Apr 03, 2010 | 2006 Toyota Land Cruiser

3 Answers

I have a 2008 corolla. It has an auto light when the car needs an oil change. I need to know how to reset it.

Look in your owners manual and go to the part that explains the different symbols on your dash. Look for that service reminder and it should tell you what page to go to to learn more about that. Somewhere there should be some wording to the effect that "When you have your car serviced by a certified Toyota dealer they will reset it for you. In the event that someone other does your maintenance then this is the procedure to reset......."

Oct 04, 2009 | 1998 Toyota Corolla

2 Answers

Maintenance Lamp

Here's how you reset your maintenance light.

To reset the light,
Turn the ignition on
Make sure the odometer displays "ODO"
1.Turn the key off
2.Press and hold down the same button you use to get to "ODO"
3.Turn the key back to ON ( while still holding down the button)
4.Hold the button in until all the flashing lines on the odometer go away and the bunch of "000000" shows up and the maint reset light will turn off.
Your'e done.

If this doesn't work, you would have to try it on "trip A" instead of "ODO".

Oct 03, 2009 | 2006 Toyota Tundra

2 Answers

How do i change the clock settings on a suzuki gsx r1000 from miles to kilometres .brought the bike but there is no handbook with it.

Press SELECT until your odometer reading is displayed.

Press SELECT and hold then immediately press ADJUST and hold it as well.

Keep holding both and your miles should switch to kilometers.

If it does not and your timing is ok, try pushing ADJUST first, holding, and pressing SELECT second, holding both until it changes.

Sep 17, 2009 | 2002 Suzuki GSX-R 1000

1 Answer

How to change mph to kmph

ther is 1.6 kilometers to a 1 mile

Mar 25, 2009 | 2008 Suzuki GSX 1300 R Hayabusa

1 Answer

Maintenence light

I get many calls a week for this procedure...
This is really easy! Follow these directions:

Turn the key ON

Look at the odometer, and verify that it displays "ODO" and the total mileage traveled. If it is on "Trip A" or "Trip B", press the black stick next to the odometer to read "ODO", and the total miles traveled.

Turn the key OFF.

Press in, and HOLD the black trip meter reset button, hold it in.
DO not release it.

Turn the key ON; do not start the car.

Observe the Odometer display. The total mileage traveled will disappear, and you will see 5 dashes, then 4, then 3, then 2, then 1 dash, and finally, 5 zeros. Then, the total mileage traveled will redisplay.

Release the black trip meter reset stick.

This completes the reset procedure, and it will be back on in 5,000 miles, to remind you of you next oil change.

Hope this helps!

Nov 13, 2008 | 2004 Toyota Camry

2 Answers

Maint light came on at 59990 miles

I own a dealership, and you are NOT stuck taking it to a dealer.

This is how you do it:

1. Turn the key on
2. Verify that the ODO dislays your 59+K miles; NOT trip A or trip B; you MUST see "ODO" displayed
3. Turn the key OFF
4. Push in and HOLD the trip reset button. Do NOT release it until advised...
5. Turn the key to the "ON" position, do NOT start the car.
6. Obsrve the odometer. You will see 5 dashes, then 4, 3, 2, 1 dashes, and then 5 zeros
7. The mileage you started with will return.
8. Release the trip reset button.
9. Start the car verify that the light is out.

If thi does not work, and it should, please get back to me.

Nov 10, 2008 | 2005 Toyota Camry Solara

1 Answer

Resetting maintenance light for toyota yaris

Turn the key on.

Observe the odometer

Is it displaying ODO/total miles traveled? If not, depress the trip reset button until ODO is displayed

Key off

Press & hold the trip reset button, keep pressing it until advised to release it.

Key on

Observe the odometer display

you should see 5 dashes, then 4, then 3, then 2, then 1, and then 5 zeros, and then the mileage you started with.

Release the button.

You are done,

If you do NOT see 5 dashes, 4-3-2-1, set the trip meter to "trip 'A'"
and retry as instructed above. Some Toyotas use either method.

Sep 24, 2008 | Toyota Yaris Cars & Trucks

Not finding what you are looking for?
2004 Suzuki GSX-R 750 Logo

Related Topics:

164 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts


Level 3 Expert

76846 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

4536 Answers


Level 2 Expert

83 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides