How to adjust Mitsubishi 4g64 carburetor? - Galant Mitsubishi Cars & Trucks

Check here:
http://www.torkspec.com/torkspecme.aspx?KI=29-2.4L-143ci-S4

Hi you can down load a manual here
http://mitsubishi-motors.kiev.ua/Manuals/Engine/pwee9616/11A.pdf

images for 1998 Mitsubishi rvr 4g64 GDI engine removal

Search on "Mitsubishi chariot fault codes". Check the hit list then work your way through the likely ones.

One of the most common problems with the 4G64 is the coil and/or power-transistor in the distributor, under the rotor.

You usually won't get an ECU error code with this bug.

Assuming you have fuel pressure, and the the timing belt set up is correct, check if you have spark. For parts, look at rockauto.com

SD

check this pdf for 4G63, and 4G64 motors.......check section 11C-33

http://www.austarion.com/tech/4g63.pdf

I hope this helps

There is no "outside" adjustment.
This involves getting inside - to the Timing Belt and checking the Timing Marks and Belt.
Click on the following free direct Link. It has the Timing: Belt and Mark Diagrams for your 1997 Mitsubishi Galant 2.4L. Plus additional Instructional and Directional Diagrams.

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!
http://www.2carpros.com/car_repair_information/year/1997/make/mitsubishi/model/galant/1997_mitsubishi_galant_timing_belt_diagram_marks.htm

You may also Click on the following free direct Link for Diagrams on the access to the Timing Belt, in the removal of the Serpentine/Drive Belts.
http://www.2carpros.com/car_repair_information/year/1997/make/mitsubishi/model/galant/1997_mitsubishi_galant_drive_belt_routing_diagram.htm

you have a problem here ,ask a local mechanic to have a look

That car has the 4G64 engine in it. The manual below covers both the 4G63(DOHC) and 4G64(SOHC), but it should definitely help you get that timing set. Timing belt removal procedures start on page 33.

http://www.scribd.com/doc/4570538/Mitsubishi-4G63-4G64-Engine

Your car will have the 2.4L SOHC engine in it (AKA 4G64). This manual will show you how to replace the timing belt (and more). Timing belt procedures start on page 33.

http://www.scribd.com/doc/4570538/Mitsubishi-4G63-4G64-Engine

(P.S. this manual also includes the 4G63 engine, you can identify your engine by looking at the procedures for the Single OverHead Cam[or SOHC])