Question about 1997 Honda CBR 600 F(3)V

2 Answers

96 CBR 600F3 runs for approx 10Min then stalls out.

I have a 1996 Honda CBR 600F3. Bike ran fine for the past 3 months. I now have a problem. The problem is that the bike runs for about 10 minutes and then stalls shuts off. It almost seems as though I'm out of gas. I can try to resart, but only runs for approx 2min. I checked the on/off valve for the fuel it was to the on position. I have also checked fuel flow from gas tank. Fuel flow is good from gas tank. I checked fuel filter. Gas flows from fuel filter good also. Electrical seems to be normal 14.98VDC @ 2000 RPMs. No other major problems with the engine such as overheating, fuel leaks, or collant problems.

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 13 Answers

Check the vacuum pipe from the carbs to the fuel tap, if its gat a pin hole in as you demand more fuel the vacuum loss cuts downthe fuel flow and the bike will stop!

Posted on Jul 28, 2009

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Got a 2002 cbr 600 fuel not getting thought to injetters

Posted on Sep 20, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1996 cbr f3 bogging


When you strip a set of carbs you should balance them after refitting. The kit isn't expensive and comes with instructions. It could be something as simple as the throttle cables are set up wrong(if one is opening first then the engine may work okay in 1st but bog when under greater load ie 2nd)

May 04, 2013 | Honda Motorcycles

1 Answer

Put a new battery in my 96 cbr 600 last month its been fine .. yesterday did a few wheelies n the key came out finally wen i stoped the bike died n battery was dead ... could it b a stator or rectifier ?...


chare the battery back up and get a volt meter, the battery should read 12v or a little higher, when you start the bike the voltage should rise to around 14v, if it doesnt rise it is not charging and the reg or stator needs checking

Jun 01, 2011 | 1996 Honda CBR 600 F(3)T

1 Answer

I purchased a 96 CBR250RR fireblade i few months ago, it had been sitting in a shed for approx 12 month after being dropped and damaged cosmeticly. I have fixed up the exterior of the bike and had a full...


Hi, Amjasper and the usual suspects are:
1. Insufficient oil level or no oil in engine or tank.
2. Air in oil system that needs to be bled.
3. Blockage in the oil tank or line.
4. Oil pump failure.
5. Faulty oil pressure sending unit.
6. Grounded oil pressure light circuit.
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
mc22 oil light on
http://www.fireblades.org/forums/honda-cbr-600/98791-oil-light-can-anyone-help.html
1986 1999 Honda CBR250R CBR250RR Service Manual Moto Data Project
http://www.partsfish.com/page/oem-parts-for-honda
http://www.hondampe.com.au/docs/owning_a_honda/owners_manuals/motorcycles/CBR250R-RA%2032KYJE000.pdf

Mar 25, 2017 | 1996 Honda CBR 250 RR

3 Answers

I just bought a used 2002 honda cbr 954 rr. i cleaned the spark plugs about a month ago and it started up and ran fine. but now i cant get it to run no longer than a few seconds. any ideas what the problem...


Was the bike running fine before you cleaned them? If your bike won't stay running, you might need to adjust your idle. There is a black round dial on the left side next to the stator (big round circular housing) turn it so the fuel is increased.

Jan 11, 2010 | 2002 Honda CBR 954 RR Fireblade

2 Answers

Where is the fuel filter located on 1997 honda cbr 600


I have a 1996 CBR 600F3. Mine is directly under the gas tank. Where the gas tank meets the seat. If you remove the single top bolt for the gas tank and the lower bolt for the gas tank you can lift the tank a little. Then you will see the rubber gas fuel line. The filter will be in-line.

Jun 18, 2009 | 1997 Honda CBR 600 F(3)V

1 Answer

Honda cbr 400 rr starting problem


i could not find a schematic of a 96 cbr400rr, so guessing this bike is not from the USA. however, there should be a master fuse near the battery on the positive side mounted to the battery box somewhere. i would check this fuse first to see if its burned out.

also, is battery fully charged? might have to top charge the battery to get good juice if its old (>3 years) and been sitting for a bit.

good luck.

Jan 28, 2009 | 1996 Honda CBR 400 RR

1 Answer

97' cbr 600 rr f3 doesn't start


check to see if fuel switch is on...when was the last time carbs were checked?

Dec 24, 2008 | 1997 Honda CBR 600 F(3)V

1 Answer

How do I adjust the rear tire on a 97 honda cbr 600f3


40mm slack up and down middle of chain. not tight when sitting on bike. loosen axle ajust both sides evenly, retighten axle install new split pin

Dec 04, 2008 | 1997 Honda CBR 600 F(3)V

1 Answer

Fuel pump pressure


In my experiences over the years pressure testing the carbs and messing with the fuel pump, I have never actually tested the pump output. Knowing that the average pop off pressure of the float valve on the float is 10-13 psi, this being tested via hand held pressure gauge to ensure no leaks before installation on the bike. I assume that the fuel pressure coming from the pump should not exceed the pop off pressure or it could cause the carbs to leak though and the bike would run rich. Hope this helps out.

Nov 10, 2008 | 1997 Honda CBR 600 F(3)V

Not finding what you are looking for?
1997 Honda CBR 600 F(3)V Logo

331 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4521 Answers

yadayada
yadayada

Level 3 Expert

76164 Answers

Mike

Level 3 Expert

4340 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...