Question about Harley Davidson FXR Super Glide Motorcycles

1 Answer

My 2000 FXR4 stops running when I am coming to a stop. The starter button doesn't always work. Have put a new relay switch in and also had the bendix rebuilt. What would cause it to quit running and the starter button not work?

Posted by on

  • morss Jul 28, 2009

    Yes, battery is good.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Cheetah:

    An expert who has answered 20 or more questions within one hour.

  • Expert
  • 188 Answers

Hi. Have you load tested your battery or swap a known good batery. Try that first.

Posted on Jul 28, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

For ranger new starter wont stop running


Starter Relay The starter motor solenoid relay switch (11450) consists of a pull-in coil, a contact disc, and two terminal contacts. Battery voltage is always present at the relay positive terminal. When the ignition switch (11572) is in the START position, the pull-in coil is activated and pulls the contact disc into contact with both terminal contacts. This allows battery current to pass through the starter motor solenoid relay switch to the starter solenoid (11390). The starter solenoid is deactivated when the ignition switch is in the RUN or OFF position.
Maybe something is hooked up wrong ! Or the starter relay is bad
May

Mar 11, 2015 | 1998 Ford Ranger

1 Answer

1998 honda civic that wont start


You should probably have your ignition switch changed. I replaced the main relay and the fuel pump, then ignition switch. Then had to have my transmission rebuilt.

Nov 25, 2012 | 1998 Honda Civic

1 Answer

Ommy st503sm stopped firing however put in a new battery but there is now no power to starter and neutral light doesn,t come on now even tho it,s not in gear all lights work


chec connects make sure theyr clean and tite-specialy batt--inspect for loose grounds--may need to test complete ignition-relays/switches/points

Aug 12, 2011 | 2008 Skyteam ST50

1 Answer

88F250 4x4 5.8L FI 5 speed. A friend has this & the starter went out. I replaced it & the solenoid. No big deal right? I returned it & the next day he called me & told me that the...


Its a solenoid...it engages the bendix and truck starts...bendix should retract because power to it gets shut off by ignition switch going to "run".

Only way bendix would stay engaged or get a signal to keep turning ???
Bad contacts in ignition switch...maybe ??
Start relay in under hood power distribution panel has hot or welded contacts ?

I've gotta think about this one...hope this gives some help...

Jul 30, 2011 | Ford F-250 Cars & Trucks

2 Answers

2000 hyundai elantra alarm goes off where is the


There is NO kill switch on the 2000 Elantra... HOWEVER, there is a thing called the Key Fob (keyless remote entry system). There is, however, a system in place called the 'starter kill' circuit and it is activated when the burglar alarm goes off.... it's called the burglar alarm relay and it is activated to prevent the engine starter system from being used. There are three ways to get the engine started in such a circumstance... 1. use the key fob to 'disarm' the system... 2. put the key in the ignition and turn it to the 'RUN" position and wait until the alarm stops (horn stops beeping and the parking lights stop flashing), then the engine will start.... 3. pull the starter relay from the UnderHood junction box and bypass the starter circuit (key in ignition and in the 'RUN' position), jumper the starter solenoid circuit to energize the solenoid to start cranking the engine -- it should start then.

Oct 03, 2009 | 2000 Hyundai Elantra

2 Answers

2000 waverunner starter wont stop


This is most often caused by a battery that does not have a full charge on it. The low amperage available from the battery causes the contacts inside the starter relay to weld themselves together and allow the electric starter motor to continue to run even after the starter button is pushed. Always start out with a fully charged battery and you will not have this problem.

Jul 25, 2009 | Yamaha 12V Air Pump

2 Answers

I have a problem


You need a new starter relay. It is located in the black box on the rear wall of the forward compartment. It is the one with the 2 red starter cables going to it and a brown and black wire coming off of it.

Jun 25, 2009 | Yamaha 12V Air Pump

1 Answer

05 katana new bat new starter new relay still won,t start when I push the srart button when i push the starter button head light goes dim.


check these things: is the engine run/stop switch pressed? is the bike in gear? is your safety switch always depressed?

Apr 05, 2009 | 2006 Suzuki GSX 750 F (Katana)

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

75 people viewed this question

Ask a Question

Usually answered in minutes!

Top Harley Davidson Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

Gills Lango

Level 2 Expert

195 Answers

Mike

Level 3 Expert

4336 Answers

Are you a Harley Davidson Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...