Question about Yamaha Motorcycles

Open Question

1997 Yamaha power comes on when I hook my battery up

Ok I hook my battery up to my bike everything comes on why is that

Posted by on

  • Gregg Mahin
    Gregg Mahin Sep 10, 2017

    Hi Ericka Jackson, I want to help you with your question, but I need more information from you. Can you please tell me what model you have in the comment box?

×

Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
  • 7 Answers

SOURCE: 1997 yamaha yzf 600r electrical problems

a jump box is nothing more then a battery with leads on it so where are you connecting it verses the new battery you put in the bike. that doesn't make since unless you are connecting the box right to the starter motor then it be constently running the motor untill you unhooked it. check all your fuses and examine all wire harnesses for damage, burns, or any mellting.

Posted on Dec 17, 2008

Ad
  • 69 Answers

SOURCE: no power to ignition

check the main grounds on the bike, also check the main starter relay.

Posted on Mar 11, 2009

bobthebulldo
  • 67 Answers

SOURCE: Bike will click but not start

check all conections are good, make sure the battery is good with a multimeter as if it has been left in a uncharged state for ntoo long it is proberly knackered if all that is ok, tap the starter with something as it could be stuck.

Posted on Jun 15, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where do I look for electrical problem on Yamaha Motorcycle?


If they did that, then they may have also wrecked the alternator and anything electronic (gauge head and ignition control module?) in the bike. It shouldn't have damaged the starter motor or the lights, though. Check & see if the lights work - try the brake light, that's easy. Headlight, too. The neutral indicator light should be OK.

If the lights work but none of the electronic stuff works, then try to avoid that friend when you have a bike problem. You'll need to trace power to everything electronic - anything with a circuit board inside - and verify whether that particular circuit board works at all, replacing it if it doesn't.

The alternator itself (the windings) should be fine, but the voltage regulator (probably inside the alternator but possibly a separate module) will likely be wrecked.

Nearly all electronic devices are sensitive to battery polarity, and can be destroyed if that polarity is reversed.

Aug 02, 2014 | 2006 Yamaha V Star 1100 Custom

1 Answer

Fog light for yamaha szr


Yes a fog light can be fitted . Mounting the fog light needs careful consideration as in best spot and vibration free as well as clean and neat installation and any brackets getting used are not to ugly . The next thing is to splice into your bikes wiring to hook it up or to have a independent wiring system and switch running from your battery and this should include a fuse just incase . I would go with the independent system to start with as its much more easy to set up , this will include a positive and negative wire coming from your battery ( with a fuse attached to to positive wire ) that can run to the fog lamp + side ( power ) the other wire from the battery - negative side ( earth) can go to the on- off switch and then to the fog light so that you switch the fog light to on it completes the circuit giving power to the light without digging into your bikes wiring system which can be done later if you want ...

Nov 24, 2013 | 1997 Yamaha SZR 660

1 Answer

I have a 1999 Yamaha Roadstar 1600. I ride the bike for minutes or hours and the bike stops running. The bike has no electrical power and wont start leaving me stranded. If i wait a few hours the bike...


Check if the charging system works ok.
At idle with lights off, you should see 13.5-14.5V on battery's terminals and 0.5V less with high beams on, at idle speed as well as at 4000rpm.
Use a fresh good verified battery to take the readings.

Oct 15, 2012 | Yamaha Motorcycles

1 Answer

Yamaha wont start


Hi Denver, and the usual suspects are:
1. Ignition switch not in the "ON" position.
2. Engine run switch in the "OFF" position.
3. Discharged battery, loose, corroded or broken battery cables, especially the "NEGATIVE" cable at both ends (solenoid chatters).
4. Bank angle sensor tripped and ignition/light key switch not cycled to the "OFF" position and then back to the "ON" position.
5. Security alarm needs a reset.
6. Starter control circuit, relay, or solenoid faulty.
7. Electric starter shaft pinion gear is not engaging or over-running starter clutch slipping.
For more information about your issue, please visit the websites below. Good luck and have nice a day.
1997 Yamaha Motorcycle Service Repair Manuals

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Dec 20, 2011 | 1997 Yamaha YZF Thunder ace 1000 R

1 Answer

My Yamaha Virago runs great till the battery dies. I've replaced the battery a couple times, the bike just doesn't keep it charged. I've heard "replace the rectifier regulator" and did that 2 or 3 times....


Sounds like you need to monitor what's going on at the battery. Hook up a volt meter to see if it's charging. Check and clean all connections / plugs. Check connections at key switch. Look over all wiring for shorts or broken wire. Disconnect everything but motor wiring to narrow down the problem. Starter drains battery faster than it can recharge.........
A dead battery will mess up a charging system and a bad charging system will kill a battery.

Aug 11, 2010 | 1997 Yamaha XV 535 Virago DX

1 Answer

1997 Suzuki TL1000S - no electrical power at all.


check kill switch circuitry its located near the start button asembly.

Sep 30, 2009 | 2001 Suzuki TL 1000 R

1 Answer

Starter button wont work,battery ok,everything else was fine


Hi and welcome to FixYa,

Initially, try starting the bike with the clutch lever pulled in and/or the sidestand folded up. If it does start, then the interlocks (safety features) has to be checked.

If still a no go, determine if you hear a clicking sound. If yes, follow the big cable from the battery's + terminal. it would normally end up in the starter motor relay. Jumper the 2 big terminals while starting the bike. Expect a big spark hence jumper on the nuts, not on the threaded portion. if the starter motor spins, then it would be a defective syarter relay. If the motor stil fails to spin, then it would be a faulty starter motor; most likely the carbon brushes.

Good luck and thank you for using FixYa.

Jun 25, 2009 | 1997 Yamaha Xv 250 Virago S

1 Answer

Bike will click but not start


check all conections are good, make sure the battery is good with a multimeter as if it has been left in a uncharged state for ntoo long it is proberly knackered if all that is ok, tap the starter with something as it could be stuck.

Jun 13, 2009 | 1997 Yamaha XV 535 Virago DX

1 Answer

No power to ignition


check the main grounds on the bike, also check the main starter relay.

Mar 06, 2009 | 1997 Yamaha YZF 750 R

Not finding what you are looking for?

Open Questions:

Motorcycles Logo

Related Topics:

53 people viewed this question

Ask a Question

Usually answered in minutes!

Top Yamaha Experts

vince

Level 3 Expert

1234 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1176 Answers

D. E. Hev

Level 3 Expert

1187 Answers

Are you a Yamaha Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...