Question about 2000 Yamaha V-Max

1 Answer

Vmax vboost won't cycle when the key is turned on (it tries to)

When I turn on the key the vboost should cycle open then closed but sometimes it does and other times it doesn't ( just a grrrr noise as it tries)
any ideas? I checked the connections under the scoop and all appears to be tight.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 16 Answers

I had a similiar problem with my Vmax. It was the Vboost computer for mine. It is located under the Left side scoop and is a small black plastic box with a round electrical connector. They are very expensive new. I got my replacement on ebay for around 75.00 dollars. I hope this helps.

Posted on Sep 19, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Reset key fob


Unlock all doors, foot on brake, all doors closed. Cycle key quickly but carefully on-off appr 10 times until the car honks one time.

Do not turn the key far enough to start the car, just to the 'on' position so the dashboard lights up.

When the horn honks, open and close the driver's door, press any remote button and that's it.

Program another remote? Quickly open and close the driver's door again and push a button on the 2nd remote. That's it.

When you're done, remove the key and the horn should honk 3 times. You're all set.
Sometime it takes more than 10 on-offs to set program mode. Open/close the door, lock/unlock etc, wait 10 minutes, then try again

Jul 22, 2014 | Subaru Outback Cars & Trucks

1 Answer

Sometimes won't start when turning key


try disconnecting the battery cables.clean the connections with baking soda and water solution,(alittle thick solution)it should make the connections look new.if the battery is close to 3yrs old replace it.isure this helps you out

Mar 18, 2013 | Cars & Trucks

1 Answer

Whirlpool Duet gas dryer won't turn on


It seems that the button is defective. This is something that will require a technician to check out.

Jan 24, 2013 | Dryers

1 Answer

Having trouble with keyless remote control on 1993 lexus es300. Replace battery on remote- still not openning doors. Help Please!


Try reporgraming it

1. Start with key out of ignition, drivers door is open all others closed and
drivers door is unlocked.

2. Insert key into the ignition (Do NOT Turn) and Pull key out.
3. Perform these steps within 40 seconds.
A. Using the power lock switch on the drivers door, perform 5 lock/unlock cycles
starting with lock. Use an even pace and try to go about one cycle per second.
(1Cycle = 1 lock and 1 unlock).
B. Close, then open drivers door.

4. Perform these steps within 40 seconds.
A. Using the power lock switch on the drivers door, perform 5 lock/unlock cycles
starting with lock. Use an even pace and try to go about one cycle per second.
(1Cycle = 1 lock and 1 unlock).
B. Insert the key in the ignition cylinder.
C. Turn the ignition to ON (Do NOT Start) then back to OFF.
D. Remove the key from the ignition.

5. Press any button on remote for a minimum of 1 second.
System should now lock and unlock doors once.

6. Close and open drivers door.

7. Press any button on remote for a minimum of 1 second. System should now lock and
unlock doors. Once to confirm programming, twice to indicate programming failed.

8. Repeat steps 5, 6 and 7 for additional remotes.

Jan 02, 2013 | Cars & Trucks

2 Answers

Lost set of keys, alarm was on car locked. Found spare key only, it will open door, alarm goes off, but the key won't start engine. It will turn in ignition, but dead! It's a Chevy HHR 2006! HELP


Close the doors. Lock the doors using the buttons on the key fob. Use the fob to again unlock the doors. The key should then work the ignition. If this will not work, you will have to tow your vehicle to the dealer and buy a new key and/or fob and have it programmed to the vehicle.

May 13, 2012 | 2006 Chevrolet HHR

1 Answer

I just bought a used DP200 Delta drill press. The chuck seems to be locked up in the closed position. I want to try to open and insert a bit, but am afraid of breaking something.


If it's locked up that tight the only thing you can do is turn the key as hard as you can until it either breaks free and works or just plain breaks. If it breaks free, spray a bunch of WD40 or like lubricant up into it, cycle the chuck to full open and full closed a few times to let it soak in then blow it out. If it's working freely throughout the travel and not sticking it should be OK. If it broke while trying to open, sticks while cycling it or just plain won't open, replace it. You need part number 1310049 from Delta to replace it (shop the internet for one). The chuck is just pressed on to the tapered spindle so you have to extend the spindle all the way down and hit the top of chuck, sometimes hard depending on how long it's been on there.

Dec 24, 2011 | Delta Dp115 Dp200 Dp300 Drill Press Sleeve...

1 Answer

How reset the cash register TE 2200


Are you trying to reset the daily report?Try turning key to Z1 then press CASH button

Dec 13, 2011 | Computers & Internet

1 Answer

VBOOST NOT WORKING


Hi, Vmax1260 for this scenario you will need your service/owners manual if you can't find the best tool you ever bought for your Yamaha, despair not, for a mere zero $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
VBoost problems VMaxForum net
boost not working
Yamaha VMX12H Supplementary Service Manual
OEM parts for Yamaha
Yamaha VMAX VMX12W1 Owner Manual

May 24, 2010 | 2000 Yamaha V-Max

1 Answer

Yamaha vmax 2000 model, full power, runs fine but will not accelerate past 95mph even when on vboost. It is not restricted


Air or fuel. Your not getting enough of one or the other. Start with air by removing your air filter (temporarly) and see if that will tell you anything.

Sep 30, 2009 | 2000 Yamaha V-Max

1 Answer

Vmax vboost not working


Hi, Allwardr for this scenario you will need your service/owners manual if you can't find the best tool you ever bought for your Yamaha, despair not, for a mere zero $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
VBoost problems VMaxForum net
boost not working
Yamaha VMX12H Supplementary Service Manual
OEM parts for Yamaha
YAMAHA VMX12 Owner Manual

Jan 28, 2009 | Yamaha V-Max Motorcycles

Not finding what you are looking for?
2000 Yamaha V-Max Logo

Related Topics:

351 people viewed this question

Ask a Question

Usually answered in minutes!

Top Yamaha Experts

dhnguyen

Level 2 Expert

281 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1144 Answers

Tony

Level 3 Expert

2600 Answers

Are you a Yamaha Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...