Question about 2004 Honda CMX 250 Rebel

1 Answer

Hi there, 2005 honda rebel 900 mi.still new.how do i fix it? to get it to go into neutral from 1st?linkage is 1/8"free play.there is very little pull on the cluch lever to engage or to disengage.also looking at the drive spocket there is a full tooth of slop back & forth when it`s in gear.& motor off, it`s a;so there with it running.this is a little diff. from when i was mech.n m/c`s in the 60`s-70`s. i hoipe you can tell me how to fix this problem. thanks,, gail,,in wi. crash@wctc.net

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

Remember neutral is a 1/2 notch toward second gear. Not all the way down or a hard pull up toward second gear ....it is a light half notch between first and second. With the engine running it will almost always walk the shifter past neutral because of centrifical force from the engine.

Posted on Jul 27, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

HONDA CRF 80 HARD TO FIND NEUTRAL


Hi, Anonymous, a proper clutch adjustment starts by squirting some silicone spray or Brake Kleen into the top of the rubber boot on the clutch cable and sliding it back exposing the cable adjuster. Loosen the jam nut and turn the adjusting screw all the way in. Loosen the jam nut on the clutch pack adjusting screw until light resistance is felt against the clutch rod then back the adjusting screw out 3/4 of a turn and tighten the jam nut. Go back to the clutch cable adjuster and back it out until there is 1/8" free play between the clutch lever and the bracket perch. This is correctly accomplished by pulling the clutch cable end outward with your right hand and pulling the clutch lever in with your left hand and modest pressure on both hands to eyeball the free play. Tighten cable adjuster jam nut and slide rubber boot back to its original position.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Hard to find Neutral
Why is my bike so hard to get into neutral
CRF80F CRF100F service manual repair 2004 2013 CRF80 CRF100 Download... $15
http://www.partsfish.com/page/oem-parts-for-honda
HONDA CRF80F Owner Manual

Dec 01, 2013 | 2005 Honda CRF 80 F

1 Answer

2001 Honda rebel wont go into neutral when engine is on


Hi, Victor for this scenario you will need your service, parts fiche, and owners manual if you can't find the best tool you ever bought for your Honda, despair not, for a mere zero $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
2001 rebel 250 hard to get into neutral
Can find Neutral on Honda Rebel
Honda rebel 250 Service Manual
http://www.partsfish.com/page/oem-parts-for-honda
http://mybikemanuals.com/honda

Nov 24, 2013 | 2001 Honda CMX 250 Rebel

1 Answer

2005 Honda CMX 250 Rebel head bolt torque


Hi, Anonymous for this scenario you will need your service, parts fiche, and owners manual if you can't find the best tool you ever bought for your Honda, despair not, for a mere zero $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Torque specs for cylinder and head
Honda CMX 250 Rebel Tell me about them
Honda rebel 250 Service Manual
http://www.partsfish.com/page/oem-parts-for-honda
Honda CMX250C REBEL 2007 Owner Manual

Sep 23, 2013 | 2005 Honda CMX 250 Rebel

1 Answer

2005 Honda CMX 250 Rebel fuse box location


Hi, Taibui123456 for this scenario you will need your service, parts fiche, and owners manual if you can't find the best tool you ever bought for your Honda, despair not, for a mere zero $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
2005 Honda CMX 250 Rebel fuse box location Google Search
Electrical access fuses and spare fuses 250
Honda rebel 250 Service Manual
https://www.partsfish.com/page/oem-parts-for-honda
Honda CMX250C REBEL 2007 Owner Manual

Mar 19, 2013 | 2005 Honda CMX 250 Rebel

1 Answer

Honda CBF250 - When clutch pulled fully, switching Neutral to 1st Gear bike bounces forward


I think could two things. 1. A sticky clutch from being used for awhile. Are you starting it in gear with the clutch in or in neutral then engaging first. 2. You might need a slight adjustment on your clutch. Particully if there doesn't feel like much tension on the clutch lever.

Dec 03, 2012 | Cars & Trucks

1 Answer

Clutch lever won't engage on 2005 honda rebel


Hi, Anonymous and the usual suspects are:
1. Clutch cable adjusted too tight.
2. Pressure plate center screw adjusted too tight
3. A broken clutch rod.
4. Slave cylinder piston stuck.
5. Clutch plate missing from the clutch pack.
6. Clutch plates have worn past minimum specifications.
7. Clutch plates crystallized due to incompatible oil.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
How to adjust motorcycle clutch cable
Clutch won engage can shift into gear
Honda rebel 250 Service Manual
https://www.partsfish.com/page/oem-parts-for-honda
http://mybikemanuals.com/honda

Sep 07, 2012 | 2005 Honda CMX 250 Rebel

1 Answer

What is torque spec on a 2005 Honda CMX 250 Rebel triple tree clamp @


Hi, Anonymous for this scenario you will need your service manual, parts fiche, and owners manual if you can't find the best tool you ever bought for your Honda, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Rebel CMX 250 Torque Specifications
Torque Specs for axle bolts
Honda rebel 250 Service Manual
https://www.partsfish.com/page/oem-parts-for-honda
Honda CMX250C REBEL 2007 Owner Manual

Aug 19, 2012 | 2005 Honda CMX 250 Rebel

1 Answer

1972 Honda CB 100 hard to find neutral


Hi, Matt, a proper clutch adjustment starts by squirting some silicone spray or Brake Kleen into the top of the rubber boot on the clutch cable and sliding it back exposing the cable adjuster. Loosen the jam nut and turn the adjusting screw all the way in. Loosen the jam nut on the clutch pack adjusting screw until light resistance is felt against the clutch rod then back the adjusting screw out 3/4 of a turn and tighten the jam nut. Go back to the clutch cable adjuster and back it out until there is 1/8" free play between the clutch lever and the bracket perch. This is correctly accomplished by pulling the clutch cable end outward with your right hand and pulling the clutch lever in with your left hand and modest pressure on both hands to eyeball the free play. Tighten cable adjuster jam nut and slide rubber boot back to its original position.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Shift into neutral
Help plz cb350 can get neutral when running
http://www.dotheton.com/downloads/Honda%20CB100%20CB125%20CL100%20SL100%20CD125%20SL125%20Workshop.pdf
https://www.partsfish.com/page/oem-parts-for-honda
1972 Honda CB100 Motorcycle Specs

Apr 29, 2012 | 1972 Honda CB 100

1 Answer

Hi there my benelli 900 tre won't go into neutral when bike is running?


hi, sounds like clutch drag, has the bike stood for any length of time, chain tension also plays an important part of easy gear selection, as well as the correct amount of free play at the lever

Jan 11, 2011 | 2005 Benelli Tornado Tre 900

2 Answers

1987 Honda rebel 250 shifting problems


make sure you have proper amount oil in your gear box, i would change it since is 1987, check the cable, over time it things tend to stretch, squeeze the clutch handle fully, check if it pulling the clutch arm fully, if its not lift fully it will be also hard to engage and disengage the gears. low oil, dirty oil gives the gear very little lubrication will also cause the problems.

Jul 16, 2009 | 2004 Honda CMX 250 Rebel

Not finding what you are looking for?
2004 Honda CMX 250 Rebel Logo

Related Topics:

266 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4898 Answers

yadayada
yadayada

Level 3 Expert

79851 Answers

bazzz7071
bazzz7071

Level 2 Expert

342 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...