How do I fix the kick start on my kx60 dirt bike.

Yes, you will need to split the casing in order to replace the kick start shaft. The exact details of the process vary depending on the model of your dirt bike, but it will likely involve draining the engine oil, removing the side cover and clutch, and then removing the kick start shaft. Once the shaft is out, you can replace it with the new one and reassemble the engine.

7 Things To Do When Your Dirt Bike Won't Start - All

www.instructables.com/.../7-Things-To-Do-When-Your-Dirt...

InstructablesSometimes when your dirt bike does not get used, it won't start.Here are some ways to start a "mad motor."

What To Do When Your Bike Won't Start - Dr. Dirt - Dirt Rider ...

www.dirtrider.com/features/protips/141_0803_dr_dirt_bike_wont_start

Apr 6, 2009 - Tech How-To****There are few things more frustrating to a rider ready to ride than a motorcycle that won't start. But a silent machine need not ...

So, Your Dirt Bike Won't Start? - Cannibal Cycle

Float in the carburettor could be stuck

serial numbers ,look them up

This is not easily done, and may cost more than the bike is worth if it was possible, better to fix the kick start, sell it , and buy a bike that has E start

Can't kick start in neutral?

remove the cover that houses the kick starter and look for a failed return spring or some other reason that keeps the kick start dog engaged.

hi friend,
Step 1
Move switch to ON positionLocate your dirt bikes OFF/ON, RUN/OFF, or START Switch. Use your finger to move the switch to the RUN, ON, or START position.

Step 2 Turn fuel switch ONLook on the side of your dirt bike near the engine and locate the "FUEL ON/OFF" switch. Use your finger to move the lever to the "ON" position. Your dirt bike will not start if the fuel is turned off. This off switch helps prevent fuel leaks when your dirt bike is stored.

Step 3 Turn choke ONIf your dirt bike engine isn’t warm, you will need to turn the choke on to start the bike. Locate the choke lever near the engine on the side of your dirt bike, probably not far from the "FUEL ON/OFF" switch. Use your finger to move the choke lever to the on position. Once your dirt bike has started and the engine has warmed up, you will need to move the choke lever to the "off" position.

Step 4 Foot on kick start pegBend your knee and place your foot on the kick start peg while leaning your weight on your other foot. Stand slightly and push the kick starter all the way down with as much force as you can.

Step 5 Push all the way downIf the bike doesn't start after the first attempt to kick start it, try again. Remember to push the peg as far down as it will go with as much of your weight as possible.

jQuery('.article ol .image').each(function(i,e){ var $this = jQuery(this); $this.find('img').error(function(){ jQuery(this).remove(); $this.remove(); }); }); Tips & Warnings

• If your dirt bike has a four-stroke compression engine and won't start, release the compression valve and try starting it again.
• Sometimes, the engine remains in a compressed position and cannot turnover until the pressure is released.
• If your dirt bike is equipped with an electric-starter, but won't start, you can follow these steps and kick start it.
• Remember: always wear safety equipment when operating a dirt bike or ATV.
• You should at least wear a helmet, boots that cover your ankles, and a chest protector to avoid serious injury.
• Always supervise children when operating motor vehicles.

hope this helps u
please rate me.......................
thank u for using fixya
regards
sivaranjini

Hi!

Well, first of all, YES it will start without any oil at all, but in a few minits it will be damaged badly inside the engine. The oils has nothing to do if it starts or not.
Now to that crack youve got under the bike, well its damn expenisve to buy a new casing, BUT you dont need to buy one:) the crack can be WELD:) thats something you cant do yourself. Take the bike to someone good at welding and he will fix it for you in notime:) and its cheap to do it. DO NOT drive the bike before you fill it up with new oil, dont even start it up again without any oil in it, that can be very expensive to do that if you are unlucky.

Good luck
Nic

i used to own a yz426f and it had the exact problem... a fresh plug will fix your problem. change the plug and the bike will run great. also don't start the bike and shut it off , my bike would be fine if i started it and rode for a while getting to the proper heat range help save the plug. if my bike didn't start in one or two kicks it was usually the plug.



hope this helps