Question about 2006 Hyosung GT 650 R

1 Answer

2006 Hyosung GT 650 R starter spins but doesn't engage

Hi, there I have a Hyosung GT650R with starter problems. This is intermittent, sometimes it will start sometimes it won't, the starter spins but doesn't engage. You can rock the bike in gear and sometimes it works sometimes not. So basically you press the starter button and you hear a fast spinning noise but no cranking at all.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Hyosung Master
  • 39,932 Answers

Hi, Emma the starter clutch is a separate mechanical gear driven component that is activated by the starter motor, it engages the clutch pack gear or the flywheel gear to turn over the engine. It has an internal mechanism that allows the gear to turn in one "ONE DIRECTION" only and once the engine starts allows the gear to free spin with engine rotation. If the starter gear free spins in "BOTH DIRECTIONS" then the drive gear has failed, it might be serviceable on some models but usually needs to be replaced.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Starter spins but doesn turn the engine
Starting problems
HYOSUNG GT 650 Service Manual
HYOSUNG AQUILA 650 FI Service Manual
HYOSUNG GT650SR PARTS CATALOGUE Parts Catalog
HYOSUNG GT 650 Manual

Posted on Aug 12, 2017

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 7 Answers

SOURCE: won't post/boot

Check to see if you are getting any flashing num,scroll,or caps lock lights you can also if you want a definite answer go to (http://support.dell.com/support/topics/global.aspx/support/dsn/en/tree?c=us&l=en&s=gen&treeid=3D170450481B7790E040A68F5B2871BC), select the system type and go through the troubleshooting steps.

**Oh by the way if you turn on your system and then it turns back off after less then 3 seconds, according to dell troubleshooting we would be looking at replacing the motherboard.

Posted on May 14, 2009

SOURCE: When attempting to start the bike, it will only

You will have to check the starter motor , but have you tried to by pass the soleniod switch?, try to do so by connecting the two points at the solenoid, if the starter truns thn its the solenoid switch which is faulty ..if it doesnt still turn, thn you will have to remove the starter and overhaul it.
Hope this helps!

Posted on Aug 02, 2009

  • 21 Answers

SOURCE: My starter spins but doesnt engage

The problem is with ignition.Check it and check the spark-plug.

Posted on Aug 26, 2009

tbirdfan1
  • 3051 Answers

SOURCE: when i start the 95 tahoe, i hear a spinning

Hello there:
The spinning that you are hearing is the bendix spinning there is a
engagement spring that forces the bendix to engage on the flywheel
If this spring is weak or broke the bendix cant engage furthermore if the teeth on the bendix are broke or chipped or the teeth on the fly wheel are chipped or broke -this will not allow the bendix to engage or start to turn the motor ok so i would have these things checked out ok?
I hope that this is very helpful for you best regards
michael

Posted on Nov 18, 2009

  • 149 Answers

SOURCE: starter works but gears seem to free spin, wont crank engine

sounds like the sprag clutch has failed. If you can see the large gear that sits behind the rotor and its turning but the rotor isnt turning the sprag clutch has failed. Very costly. usualy you would have a missed start eg not engaging every now and then before this fails all together.

Posted on Jul 01, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to derestrict a 2007 Hyosung Comet GT650R


Hi, Patrick for more information about your question and valuable "FREE" downloads that you will need for viewing and printing please click on the blue links below. Good luck and have a wonderful day.
2 Wheels View topic GT650R Derestricting
How to derestrict an EFI Hyosung GT650 LAMS model
HYOSUNG GT 650 Service Manual
http://www.alpha-sports.com/hyosung_parts.htm
HYOSUNG GT650 Owner Manual

Aug 01, 2017 | 2007 Hyosung Comet GT650R

1 Answer

My hyosung gt650r carburetor is leaking gas from the both bottom tubes and I don't know why, please help me out finding the problem.


the floats are probly stuck--take bottom covers off and clean--carbs may need overhaul--if u cant getta repair manual--*** bikes are similar-library has many books sec629

Oct 12, 2011 | 2005 Hyosung GT 650 R

2 Answers

I have a 2008 MS3 250 that will not charge


The battery may be dead and won't receive a charge. If you haven't already, try changing the battery, but charge the new battery on a battery charger before you put it in. You don't want the charging system to have to start off trying to charge another partially charged battery.

Feb 22, 2011 | 2005 Hyosung GT 650 R

1 Answer

2009 Hyosung GT650R, brake light stays on. How does one fix this problem


There is a switch that is connected mechanically to the rear brake mechanism. If the return spring has broken or the switch is broken or misalligned, that can call your problem as can the front break switch, if fitted.
Hope that helps.

Nov 05, 2010 | 2005 Hyosung GT 650 R

1 Answer

My 2006 gt650r backfires as l back down through the gears


Replace the exhaust gaskets in the head and pipe connections. This should minimize the the popping. Air leaks into the exhaust and re-ignites the unburned gases.

Sep 19, 2010 | 2005 Hyosung GT 650 R

1 Answer

Dose anyone know how to tune the carbs for a hyosung gt650R not restricted. i want to know the number of turns to set my air fuel. plz help.


Hi and welcome to FixYa,

Assuming everything is stock with no aftermarket add-ons, no carb issues, have you tried 1 1/4 turn from full in?

Good luck and thank you for asking FixYa.

Dec 07, 2009 | 2005 Hyosung GT 650 R

2 Answers

Hi i have a hyosung gt650r only push starts.....


the battery is charging ok if not the bike wouldnt run-ur starter motor needs inspection-maybe the rotor or brushes r froze-1st chec wiring that gos to the starter-could be loose or bad-with a manual u can disasemble n test the motor-ni dong ma zai jian

Aug 17, 2009 | 2005 Hyosung GT 250

1 Answer

Power restrictor


Replace carb slides. Order the parts from hyo dealer. Remove carbs. Take out old slides and replace with new ones

Nov 10, 2008 | 2005 Hyosung GT 650 R

Not finding what you are looking for?
2006 Hyosung GT 650 R Logo

Related Topics:

17 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyosung Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

yadayada
yadayada

Level 3 Expert

74945 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a Hyosung Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...