Baja warrior 200cc motor specs - Motorcycles

What are you talking about... valve clearance?
Start here.. .0025" - .003" on the intake and .0035" on the exhaust
Measured with the engine COLD and at TDC (compression stroke)

you have the linkage set wrong on it , possibly linkage in wrong whole.

Hi, Randall for more information about your question and valuable "FREE" downloads that you will need please visit the websites below. Good luck and have a nice day.
Baja MB 200 Operator Manual
Baja Mini Bike Parts Baja Heat Parts Baja Mini Baja Parts
Mini Bike Easy Governor Bypass 1080P
http://docsfiles.com/pdf_baja_bike_manual.html

It depends entirely on the engine's properties.

Your standard lawn mower engine of 200cc produces about 2.5 hp.

Some production high-performance cars produce one horsepower for every cubic inch of displacement, a 200cc engine is 12 cubic inches, so if your little 200cc motor is engineered as well as these cars, it could produce 12 horsepower.

The above pertains specifically to four stroke engines. If your 200cc motor is a two-stroke, you can easily double those numbers because a two-stroke hits every time the piston travels up.

You may also note that some 200cc motorcycles can produce as much as 50hp

see this link for free wiring diagrams for all chinese machines

http://www.kazumausaonline.com/more-chinese-parts-chinese-atv-wiring-diagrams-c-277_325.html

It could have bad rings in motor, causing it not to get the compression it needs to run good

you might find a service manual at the bluetraxx forums

pray.

its probably the same. check yamaha for a model number. usually something like YFM 350 and search for that service manual.

Hello, this picture is for the single over head cam engine...
And this picture is for the dual over head cam turbo engine...