Question about 1995 Yamaha FZR 600

1 Answer

Hi, I have a 1991 FZR600 3he model. Its been prepped for the track but i want to put on the road. It needs indicators for the MOT. I have found the wiring plus connectors for the rear indicators and the front right hand side but cannot find the wiring/connector for the left hand front side. There is a block connector (male) with a green and black/chocolate wire going into it but also a blue and red wire. Could this be what im looking for and if so what do I do with the blue and red wire.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 29 Answers

You do not need indicators for MOT. If they are fitted they must work...so dont fit them.

Posted on Aug 12, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Electric train set stop and goes when it goes over certain parts of the tracks do I need to clean the tracks or the wheels and what do I use to correct this issue?


1: make sure all track connections are tight.
2: clean the track using a Green 3M scratch pad
or a track eraser.
3: clean your wheels, some people use smoke fluid
on a cloth, I use alcohol prep pads,. A track eraser
can also be used. there are commercial wire brush
cleaners that connect to your power source.

Nov 05, 2011 | Bachmann Thomas the Tank Engine Train and...

1 Answer

My car is Honda Civic 1995 model. When I drive it on an irregular road or even on straight road it's steering moves left and right. It did not have complete grip on the road. It seems like the where ever...


Hi, to me the problem sounds like the track rod ends need replacing these are what connects the steering to the hub now when you turn the wheel the track rod ends push the hubs in the way you want to turn but what happens ball joint on the track rod end get play in it is it allows the wheels to turn slightly on their own left and right now once these have been replaced you will have no problems.
if the ball joints where to break you would lose control of the car as the steering wheel would not turn the wheels as instructed and they would be free to turn any way they liked, this would cause damage to the front wings and the hub costing a fortune to put right, but as it stands the track rod ends cost very little to buy and dont cost much to get replaced.

how ever this isnt the kind of job you can do yourself as you would need to get the tracking set up to ensure the wheels are driving in a strait line as their is adjusters that need to be set up after the track rod ends are fitted.

once you have the track rod ends ( tie rods also known as) fitted you will have no further problems and you will then be in full control of your vehicle it will feel a lot more responsive to your control so this needs doing sooner rather than later.

Jul 13, 2010 | 1995 Honda Civic

1 Answer

I have a VW Touran it has a rattle on the rear when i go over bumpy roads, it sounds as though something is loose. Is it a normal vw noise or something to worry about?


we had a similar problem last year . When we took it for MOT it was found to have broken rear suspension spring. rattle noise stopped once it was replaced. This year MOT same problem with spring on other side of car!!!

Aug 29, 2009 | 2005 Volkswagen Touareg

1 Answer

Lights burn out


Try finding a stronger light. or add a resistor in the circut before the light that will help.

Apr 09, 2009 | 2004 KTM EXC 125

2 Answers

Rear suspension banging.


check to see if the struts mounts at the top are good and they are not leaking any oil and also check the wheel bearings

Mar 11, 2009 | 1991 Toyota Camry

1 Answer

Bikes been in storage for 4 years


Your oil pan where you normally drain the oil when changing it IS the crankcase. I would also drain any gas from the fuel tank(s) and put fresh gas in it, and you will probably need a new battery.

Mar 10, 2009 | Harley Davidson FLHR - FLHRCI Road king...

2 Answers

Need manual for Cuisinart Prep 11 Plus


You can get the manual here at this link.

http://www.cuisinart.com/manuals/index.php?item_id=53

Good Luck and Please Rate FixYa!

Dec 25, 2008 | Cuisinart Food Processors

1 Answer

Power window inop


The plastic strip in the window regulator track broke. It is replaceable by a qualified tech or if you are pretty handy. you can go to the dealer and get the strip. remove the door inner panel and expose the regulator and window by removing the clear plastic (put this back in when reassembling or you will hear alot of road noise and have trouble keeping heat in in the winter). if you can't get the part you can at least out the mindow up now and wedge something in it so you can get somewhere at least if it's raining out. When you get the parts from the dealer they can show you how it goes in as it is hard to explain but I will if you need me to. Good luck.
Please rate this response , and let me know if ya need more help!

Aug 31, 2008 | 1991 Chrysler New Yorker

1 Answer

My car is 1991 c class and it is about to roll over to 105,000 miles and it won't pass emission test. I think it needs a new muffler.


i have change the catalyc converter on my mercedes because has failed the MOT on 135.000 miles. The new one was 200 quid and my car passed the MOT :) Good luck!

Aug 11, 2008 | 1996 Mercedes-Benz C-Class

Not finding what you are looking for?
1995 Yamaha FZR 600 Logo

Related Topics:

139 people viewed this question

Ask a Question

Usually answered in minutes!

Top Yamaha Experts

dhnguyen

Level 2 Expert

281 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1144 Answers

Tony

Level 3 Expert

2600 Answers

Are you a Yamaha Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...