- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Put the batteries in the door chime. To transfer an MP3 to the door chime, connect it to a computer with a USB cable. Open the folder to view files and drag the new (short, <= 20 seconds long) tune into the folder. Eject the door chime (like any USB hard drive) and remove the USB cable from the door chime.
Next press the Tune button to cycle through the tunes on the door chime for the front door chime. Stop when the desired tune is played. That will be played any time the front chime is pressed. If you add the jumper to pin 8, the door chime will ding as that is the rear rear door sound. For the front door, make sure that the switches (1-7) on the push button match those for the door chime.
If one of the channels on your Allen & Heath XONE:42 mixer is not functioning properly, it is likely due to a problem with the channel's internal components or electronics. To repair a blown left channel, you will need to disassemble the mixer and locate the source of the problem.
Here are the general steps you can follow to troubleshoot and repair a blown channel on your Allen & Heath XONE:42 mixer:
Disconnect the mixer from any power sources and remove any cables or accessories that are connected to it.
Carefully disassemble the mixer, following the instructions in the user manual or a service manual if available.
Once you have access to the internal components of the mixer, carefully inspect the left channel for any visible damage or problems.
If you find any damaged or faulty components, you will need to replace them. You may be able to find replacement parts online or through a specialist DJ equipment retailer.
If you are not comfortable with disassembling and repairing the mixer yourself, you may want to consider taking it to a professional repair service. A technician will be able to diagnose the problem and repair the mixer for you.
Keep in mind that repairing electronic equipment can be complex and requires specialized knowledge and tools. If you are not familiar with electronics repair, it is recommended to seek the assistance of a professional.
i have a question about heath zenith motion sensor light.
i put up two new Heath Zenith Motion Sensor Light Control the i buy from home depot tie into switch leg. When i put in on test it work fine stay on for a few second them off, but when i set up on automatic Time-1min.\ Dual Brite-off \ Lamp Mode-Normal light go off and them come back on for the rest of the nigh long and go off morning time. Any body have this problem?
Hello my name is Heath it will be my pleasure to assit you. If you go to the honeywell website you will be able to find the exact manual for the model of thermostat that you have.
×