Question about 1978 Honda GL 1000 (K3)

1 Answer

I need to hookup headlight and turn/running lights for Honda GL1000 1978. My blue and yellow turn signal wires go very low voltage when activated. Why? Where can I find a good color wiring diag.?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 149 Answers

Are you getting battery voltageto the light?? if you are check the ground circuit.. ground wire to poss battery terminal get back if you have any questions

Posted on Aug 30, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Headlight went out on low beam on a 2000 honda shadow


Hi, Anonymous if your headlight is not working, only one beam works, keeps burning out, blinking, dim or surges from bright to dim to bright the first thing you need to check is the headlight bulb for damaged filaments then check your light circuit fuse, then check your head light bulb socket ground wire for a clean tight connection, that being said the usual suspects are:
1. Faulty ground or power supply wire to headlight bulb socket.
2. Worn down solder contacts or loose fit of the bulb base in the socket due to vibration.
3. Worn, chafed, or broken wires in the light circuit.
4. Corroded, broken, or loose pins/sockets in wire connectors.
5. Faulty hi/lo beam switch.
6. Faulty ignition switch.
7. Fuse is good but no continuity on both sides.
8. Faulty headlight relay.
9. Faulty wiring between battery positive and headlight bulb socket.
10. Weak charging alternator/generator/lighting coil.
11. Faulty voltage regulator/rectifier ground or overcharging.
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
low beams don work but high beams do Honda Tech Honda Forum Discussion
2005 honda shadow headlight repair
Honda 1998 VT750C Service Manual
http://www.partsfish.com/page/oem-parts-for-honda
Honda VT750C Owner Manual

Jan 11, 2013 | 2000 Honda VT 750 C2 Shadow

1 Answer

1985 Honda VT 500 C Shadow wiring diagram


Hi, Brian for this scenario you will need your service, parts fiche, and owners manual if you can't find the best tool you ever bought for your Honda, despair not, for a mere zero $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day. 1985 Honda VT 500 Shadow wiring diagram Google Search
Honda Motorcycle Wiring Diagrams
http://www.cycleterminal.com/Service-Manuals/Honda-VT500C-Shadow-Service-Manual-English.pdf
http://www.partsfish.com/page/oem-parts-for-honda
http://mybikemanuals.com/honda/honda-vt-owners-manuals

Jan 24, 2012 | 1985 Honda VT 500 C Shadow

1 Answer

Where are the fuses for blinkers


Under the dash just left of the steering wheel. fixurupr_7.jpg
Cavity Fuse Color Description F1 -- -- Spare F2 -- -- Spare F3 10 Amp Red Headlight high beam left F4 15 Amp Lt. Blue Flasher, hazard switch (see Junction Block diagram above for location of turn signal Flasher relay - Mopar p/n 4686094) (Repair tip: WJ flasher repair)
F5 25 Amp Natural Radio amplifier F6 15 Amp Lt. Blue Park lamps F7 10 Amp Red Interior lights F8 15 Amp Lt. Blue Overhead console, rear wiper, IP lights, rear flipper glass solenoid, power locks F9 20 Amp Yellow Power outlets F10 20 Amp Yellow Adjustable pedals (2002-2004 only) F11 10 Amp Red Rear window defrost indicator F12 10 Amp Red Auto shutdown relay / "Fuel" F13 -- -- Spare F14 10 Amp Red Headlight low, left F15 10 Amp Red Headlight low, right F16 10 Amp Red Headlight high, right F17 10 Amp Red Instrument cluster, diagnostic connector F18 30 Amp ? Trailer tow F19 10 Amp Red Anti-lock brakes F20 10 Amp Red Ignition Run / Heated seats / A/C Heater control / Flasher - Left and Right turn signal switch sense F21 10 Amp Red Ignition Run / Start - PDC (Power Distribution Center) F22 10 Amp Red Ignition Run / Start F23 15 Amp Lt. Blue Brake switch F24 15 Amp Lt. Blue Foglamps F25 20 Amp Yellow Accessory delay relay (sunroof) F26 15 Amp Lt. Blue Cigar F27 15 Amp Lt. Blue Rear fog (export) F28 10 Amp Red Body Control Module, Acc/Run F29 10 Amp Red Rear wiper switch. Washer motors F30 15 Amp Lt. Blue Radio F31 10 Amp Red Ignition Start F32 10 Amp Red Ignition Run / Start - Airbag F33 10 Amp Red Ignition Run / Only - Airbag C1 20 Amp Yellow Wiper (Circuit Breaker) C2 20 Amp Yellow Seats (Circuit Breaker) C3 -- -- Spare
fixurupr_6.jpg
I hope this helps :)

May 16, 2011 | 2004 Jeep Grand Cherokee

1 Answer

How to hookup tailight wires for an 05 harley davidson sportster xl 1200 c 5 wire hookup


Orange/white = 12 VDC
Blue = 12 VDC for tail light
Red/yellow = Power from brake light switch (to stop light)
Black = Ground(s)
Purple = Left Turn Signal
Brown = Right Turn Signal

Jun 22, 2010 | 2005 Harley Davidson XL 1200 C Sportster...

1 Answer

Low Beam Drivers Side doesn't work ... low voltage,


Power for the headlights on the Left side (High and low beam.) comes from the same fuse... The ORANGE wire and the ORANGE/BLACK are the same, they connect in the harness. If you only lack the 12v to make the light work connect them at the headlight assembly.

If your low beam also lacks ground the Left low beam ground is shared with the right low beam ground... Run a wire from left low beam DARK BLUE to right low beam DARK BLUE/WHITE.

If its not working now then your cursed, seek a witch doctor.

May 23, 2010 | 2004 Buick Regal

1 Answer

Wire loose


The blue wire is the wire to supply voltage to your "running" lamp filament in the buld. Take your bulb out and look at the back side of it. It should have two round connectors on it. One is for the turn signal and one is for the running light. The "running light" should be on when you start the bike. When you turn the turn signal on on that side, the turn signsl filament should light up along with the running light filament.

With the bike running and headlight on, all four turn signals should lit as "running lights". Earlier models did not have the "running lights' on them. Now, when you turn the turn signals on either side the bulbs should blink much brighter. If you press and hold both the right and left turn signal switches, you're four way flasher signal should come on. If you still can't figure it out, Drop me a line at wd4ity@bellsouth.net and I will scan a wiring diagram in for you and send it to you. Good Luck Steve

Apr 25, 2010 | 2000 Harley Davidson XL Sportster 883

1 Answer

I need a copy of the fuse box underneath the dashboard of a 2004 jeep grand cherokee lorado limited edition


Here You are...


Grand Cherokee fuses
1999-2004

Junction Block

Cavity Fuse Color Description
F1 -- -- Spare
F2 -- -- Spare
F3 10 Amp Red Headlight high beam left
F4 15 Amp Lt. Blue Flasher, hazard switch (see Junction Block diagram above for location of turn signal Flasher relay - Mopar p/n 4686094)

(Repair tip: WJ flasher repair)
F5 25 Amp Natural Radio amplifier
F6 15 Amp Lt. Blue Park lamps
F7 10 Amp Red Interior lights
F8 15 Amp Lt. Blue Overhead console, rear wiper, IP lights, rear flipper glass solenoid, power locks
F9 20 Amp Yellow Power outlets
F10 20 Amp Yellow Adjustable pedals (2002-2004 only)
F11 10 Amp Red Rear window defrost indicator
F12 10 Amp Red Auto shutdown relay / "Fuel"
F13 -- -- Spare
F14 10 Amp Red Headlight low, left
F15 10 Amp Red Headlight low, right
F16 10 Amp Red Headlight high, right
F17 10 Amp Red Instrument cluster, diagnostic connector
F18 30 Amp ? Trailer tow
F19 10 Amp Red Anti-lock brakes
F20 10 Amp Red Ignition Run / Heated seats / A/C Heater control / Flasher - Left and Right turn signal switch sense
F21 10 Amp Red Ignition Run / Start - PDC (Power Distribution Center)
F22 10 Amp Red Ignition Run / Start
F23 15 Amp Lt. Blue Brake switch
F24 15 Amp Lt. Blue Foglamps
F25 20 Amp Yellow Accessory delay relay (sunroof)
F26 15 Amp Lt. Blue Cigar
F27 15 Amp Lt. Blue Rear fog (export)
F28 10 Amp Red Body Control Module, Acc/Run
F29 10 Amp Red Rear wiper switch. Washer motors
F30 15 Amp Lt. Blue Radio
F31 10 Amp Red Ignition Start
F32 10 Amp Red Ignition Run / Start - Airbag
F33 10 Amp Red Ignition Run / Only - Airbag
C1 20 Amp Yellow Wiper (Circuit Breaker)
C2 20 Amp Yellow Seats (Circuit Breaker)
C3 -- -- Spare

Mar 07, 2010 | Car Audio & Video

1 Answer

1996 honda accord, 6 cyl, EX Both low beam headlights went out last night. As far as I know, they were working. Went to Walmart and bought a 2 pack headlisghts and put only 1 in and the low beam (new bulb)...


Check the wire circuit for voltage and ground. The top wire is voltage, you can see the wire color, use a test lite, with lights on. The bottom black wire is ground for low beams, chassis ground. You can use test light to check ground, With test light touching voltage, touch ground wire terminal, if the light comes on, at least, the ground is good enough to lite the test light.
headlamps-q31w4wolaoqrlfayhzuvwer5-2-0.jpg

Apr 26, 2017 | 1996 Honda Accord

1 Answer

Have hand control wireing problem ,,,, need to know what color wire does what ,,,, got the left hand control to wire up on a older bike,,,,, hooking up trun sigals and head light control,,,,what color...


This information applies to the vast majority of Honda motorcycles. Colors for the right handlebar switch are: Grey sends power to the turn signal switch. Light Blue goes from the turn signal switch, to the right turn signals. Orange goes to the left turn signals. Light Green goes to the horn button.
The left handlebar switch: Yellow With Red stripe goes to the starter button. Black wires take power to the headlight switch and the kill switch. White goes to the headlight low beam, Blue to the high beam. Brown / White goes to the tail light, running and instrument lighting. Black / White comes from the kill switch and delivers power to the ignition coils.
I hope this helps.

Nov 06, 2009 | 1982 Honda VF 750 S

1 Answer

Trailer Lighting Kit


Do u have a 4,5,6,or 7 way (wire) system? If it's 4 way it allows basic hookup for 3 lighting functions:
GREEN is right turn signal and stop light, YELLOW is left turn signal and stop light, BROWN is license, and side marker lights, WHITE is ground.

5way is same as above, but adds a BLUE wire for brake signal or aux. power. Its used on pop up campers, utility and boat trailers.

6way (rectangle plug) green=right turn signal, yellow=left turn signal, brown=taillight, white=ground, red and blue can be used for brake control or auxilary. Used on small motorcycle trailers, snowmobile trailers, utility trailers.

6way Round Plug, same as above, but blue is electric brakes, and black (sometimes red,) 12v; note:sometimes red/black need to be reversed w/ blue to suit the trailer.

7way adds an additional pin at plug in for 12volt power or back up lights. Whoa! hope that answers your question w/out confusing u. Let me know if u need more info.

Oct 27, 2008 | 1997 Mitsubishi Montero Sport

Not finding what you are looking for?
1978 Honda GL 1000 (K3) Logo

Related Topics:

173 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

yadayada
yadayada

Level 3 Expert

75807 Answers

Mike

Level 3 Expert

4336 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...