I have a 2007 Suzuki Boulevard C90T I turns on the bike I press the clutch hit the starter button and nothing happens. I checked the battery and it's good. no clicking sound when I press Button.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
I had a similar problem with my 06. It was solved without replacing anything. I depressed the starter button, THEN slowly applied the clutch lever , which allowed the starter to engage at its "sweet spot". After a few times of this process being effective, the "sweet spot" was re-established, and problem was resolved. Hope this helps.
it is recommended to use Suzuki 10w40 in that bike dont use synthic until after 20000 miles as the clutch will slip and in my opion I wouldnt use syn at all in that bike.
Same problem here ... 2008 C90T ... dealer no help ... in 3rd or 4th, ignition off, force it to roll backwards until you hear the piston shift ... should start then. Told it's the rear piston stopping at or near top dead center, but also told adjust the decompression will "solve" the issue; anyway, a rolling forward-start in 4th will work, too, otherwise try rolling the bike backwards until you hear, and you will know when the piston moves and then it will start.
×