No I'm sorry I misread I didn't look at the TOPIC TO THE LEFT OF ME PLEASE DISREGUARD

So.... Get a wifi connection? Dreadfully sorry if i misread the situation but that seems to be the problem

If you are Facebook timeline, go to home page and click on photo on left side of page. You will be redirected to the page for add photos or video. And hence you can upload your video with the same by browsing your video file to upload.

I'm sorry but I believe you have this posted in the wrong product category? Please re-post the question in the proper category if this is the case, otherwise you have my apologies. This is the car and truck problem category

I hope you didn't crank this over, if you did you may have damaged the pistons or bent the connecting rods

http://us.aoc.com will take you to the companies official website. On opening this website, on the bottom left hand side of the screen you would click on ABOUT AOC. Here they explain their company, of the left hand side you may click on the other headings for more information.

If you feel that I have misread your question, please comment below and I will be happy to assist you!
Thanking you
damnor01

You most likely have a bad water temperature sensor. Replace the water temperature sensor that is probably near the discharge side of the filter pump. That should take care of the problem.

If you have an HP Officejet 9130...look on page 18 of this User's Guide for the locotion of scanner lock switch. It's labeled #7 in the diagram.
http://bizsupport2.austin.hp.com/bc/docs/support/SupportManual/c00092872/c00092872.pdf
If this is not your model, please disreguard.

i would wire the coils of each sub in series which would yield an 8 ohm resistive load per sub - and then wire the subs in parallel to the amp which would bring the resistance back to 4 ohms for a bridged load which will give you max power handling from the subs and draw the full power of the amp at the same time

Please disreguard Help posting! rayo49