Question about 1977 Honda Cb 400 F

1 Answer

I just bought a 77' honda 400 cc motor cycle, and when i press the back break it break but then doesn't release. the break cable moves but the break just stays there, is this a easy fix?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 76 Answers

Typically if the brakes have enough wear the range of motion to engage the shoes to the drum increases, this causes the cam to pass the high point. Remove the rear wheel and disassemble the brake hub. It should lift right out. Inspect and replace the shoes if needed, clean and lube the internal cam and reassemble. You can find the technical info for proper adjustment in a Clymer Motorcycle Repair Manual (Smart Purchase)

Posted on Jul 25, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Electrical manual on 1975 Honda CB400F


Hi, Ray for this scenario you will need your service/owners manual wiring diagram will be in the back of the service manual if you can't find the first and best tool you ever bought for your Honda, despair not, for a mere $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
Honda CB400T Shop Manual
http://www.partsfish.com/page/oem-parts-for-honda
Honda CB400 Owner Manual
Honda CB 400 F2 400 4 77 79

Aug 23, 2016 | Honda Motorcycles

1 Answer

How to put motor back together on2001 Honda 250 cc motor cycle


Hi,I would buy a haynes manuel it will help with toque settings and other stuff,
all the best.

Apr 17, 2015 | Honda Motorcycles

1 Answer

I cannot make my 2002 honda crv release out of park into any other gear


how high does RPM of engine go, and not move,
press right foot, look at tachometer.
then post that.
dont break your brakes.

Feb 03, 2014 | Honda CR-V Cars & Trucks

1 Answer

Key stuck in ignition of 1995 honda civic dx and stuck in acc mode


try moving the steering wheel lock to lock progressively harder, not trying to break it, and alot of the time that will help jiggle and release it.

Apr 19, 2013 | 1995 Honda Civic

1 Answer

I put a new speedo cable on my 77' Buick Lesabre but it still doesn't move what is the problem?


Are you saying the speedometer hand does not move ?
Is the cable turning inside the housing when the car is in motion ?

Jan 29, 2013 | Buick LeSabre Cars & Trucks

1 Answer

My 1998 Honda civic ex won't move but the motor


Have you just replaced the clutch? Taken out the transaxle, and put it back in? Are you sure transmission was in good condition before this? If so, review your procedure carefully to be sure you got it all back right.
Watch the slave cylinder while someone depresses clutch. You should see the little plunger move slightly out and move the clutch lever back. The lever moves the release bearing inside bell housing into contact with the pressure plate. If slave cylinder doesn't move at all, try bleeding again. The plunger has to move when clutch is engaged.
I'm not sure what you mean by "will shift but won't go into gear". You mean it's actually going into a gear position and car won't move? Or it won't go into any gear, period. As if you had no clutch?

Nov 06, 2011 | 1998 Honda Civic

1 Answer

Volume of fork oil needed per fork for a 1986 VF 400 nc 13


Well, when you take off the fork make sure you empty it first before anything else then make sure that the fork pressure spring is released before changing the seals. The fork oil amount should be no more than 200 cc or no less than 190 cc

Jun 24, 2010 | 1986 Honda VF 400 F

1 Answer

Cannot turn CC ON/OFF via remotes


Try this combination.

1) Start with the cable box turned on and TV on tuned to the cable box.

2) Press the POWER button for the cable box and then quickly press the MENU button.

3) This should bring up the user setting menu. Use the arrow keys on remote to go to Closed Caption and press right arrow button this should bring up the closed caption menu.

4) Press the OK button and this should either turn CC on or off.

5) Once Closed Caption is turned off press LEFT ARROW button to return to User Settings Menu.

6) Press the POWER button to turn the Cable box back on and the Closed Caption should be gone....


Good Luck.....

Jan 17, 2010 | Vizio VW32L 32 in. LCD HDTV

2 Answers

Simpson enduro 701 washing machine


After the water pumps out on each of the cycles the spin does not go or start and it gets stuck there.

Oct 28, 2008 | Washing Machines

Not finding what you are looking for?
1977 Honda Cb 400 F Logo

155 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

yadayada
yadayada

Level 3 Expert

75197 Answers

Gino Cussen
Gino Cussen

Level 2 Expert

216 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...