Question about 2000 Yamaha XVS 650 Dragstar Classic

1 Answer

Bike wont crank get fire to the coil non comeing out of eather coil

Posted by on

  • john_and_pen May 11, 2010

    one is starting system,the other is ignition so either it does not crank or does not fire?

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 89 Answers

Check the alternator and the rectifier, if any one is gone then the symptom is your problem.

Posted on Jul 25, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

START WHEN COLD WARMS UP WONT REFIRE NO SPARK


Not sure what year, make, model of bike, but basic testing should be done back to coil(s), if the bike fires when cold but once warmed up will not fire, could be a bad coil, or sometimes it could be a bad cam or crank sensor causing it not to start. If it's a newer bike say 2000 or newer, I'd take a look at the sensors first.

Mar 02, 2016 | Motorcycles

1 Answer

No fire from coil- replace crank sensor, fuel pump relay , new spark plugs


If you have fire going into coil and not coming out than replace coil pack. They can become weak and will cause firing to be muted. Coil should read about 13ohms with an electrical tester when disengaged from the cars power supply set on 20+ohms. Anything less needs replacement.

Sep 04, 2014 | 1994 Lincoln Town Car

1 Answer

No fire at all


Not sure I am following you.
The pickup coil in the distributor sends a signal to the ignition module which grounds the coil to cause it to spark.
Have you checked for the signal from the pickup coil, and is the coil getting voltage from the EEC relay ?

Aug 19, 2012 | Ford Cars & Trucks

1 Answer

Where can I find an ignition coil for a 2001 Buell Blast?


Check the ignition module behind the round plastic cover on the right side of the engine. Pull the cover off - the module has a small red led that flashes when the bike is cranked or runs. if it doesn't flash either the fuse for it is bad or the module is bad. I would check this first as it is a EASY test and takes 2 minutes to do. If you need parts - Harley Davidson still sells both the coil and the module.

May 15, 2012 | 2001 Buell Blast

2 Answers

96 bandit, wont start,will turn over but not fire up, have changed plugs, drained carbies, checked for spark, still not firing up, any ideas?


check fuel filter and shut off in float chamber , if you have spark and gas , still not firing check timing .

Mar 18, 2012 | 1996 Suzuki GSF 600 S Bandit

1 Answer

Bike cranks seems to have fuel but wont start...riding all day bike stalled then would not start


check your ignition control module. this controls the spark to the ignition coils wich fires the plugs.

Jul 19, 2010 | 2006 Suzuki GSX-R 1000

1 Answer

Hello i have a 01 gsxr 750 and it does not seem to fire on 1&2


You have two coils on the bike. I would start by checking the coil for the non working cylinders. Trace the spark plug wires back to the coil from cylinders 1 & 2.

Jun 16, 2009 | 1996 Suzuki GSX-R 750 T

2 Answers

I have a pit bike 125 its not starting wot so ever got good spark but still not start


If you have spark them it must be gas. eather no gas or to much gas. Put it on chock, be sure the shut off valve is in on position.Now crank it over a few times , if it wont fire. Check the plug , is it wet or dry .If its wet then it may be flooded and needs to dry out and air out the cylinder.Try starting when dry. If its dry try putting a 1/2 oz of gas into the spark plug hole. replace the plug and turn it over . This will get them to fire up. Good luck DFD

Apr 22, 2009 | RTO Pit Bikes

1 Answer

Accent 1.3 (1341cc) non starting when hot / stalling 1997


i would tend to think it was electrical possibly the coil they overheat sometimes and will kill the firing feel the coil and the resistor under the coil to see if they are more than just warm if they are that could be the problem

Mar 17, 2009 | Hyundai Motor 1998 Accent

Not finding what you are looking for?
2000 Yamaha XVS 650 Dragstar Classic Logo

Related Topics:

83 people viewed this question

Ask a Question

Usually answered in minutes!

Top Yamaha Experts

dhnguyen

Level 2 Expert

281 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1144 Answers

Tony

Level 3 Expert

2600 Answers

Are you a Yamaha Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...