Question about 2007 Harley Davidson FXDB Dyna Street Bob

1 Answer

Exploded view of swingarm bushings on it 06 street Bob

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    One Above All:

    The expert with highest point at the last day of the past 12 weeks.

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.


    An expert that got 20 achievements.

  • Harley Davidson Master
  • 47,210 Answers

Hi, Freddie for this scenario you will need your service/owners manual if you can not find the best tool you ever bought for your Harley, despair not, for a mere zero $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below and for more specific information or questions at no charge please feel free to contact me at Good luck and have a wonderful day.
The Stiffey Swingarm Stabilizer Bushings from Rivera Primo Available at...
Exploded view of swingarm bushings on it 06 street Bob Google Search FREE
Harley Davidson DYNA Models Workshop Service Repair Manual 2006 $8 very cheap
Instant Tech Relief To speak to me personally absolutely "FREE"

Posted on May 20, 2017


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

View 2010 street bob rear axle assy

You need a parts book schematic, service manual does not really show much. Right side insert axle through adjusters in swingarm then brake caliper support arm then short spacer then into bearing in wheel then there is a spacer in the hub between that bearing and the left bearing so then through those and out left side through long spacer into swingarm and adjuster and then out left side of swingarm, install washer, cone nut and then "E" clip.

May 20, 2014 | 2006 Harley Davidson FXDBI Street Bob

1 Answer

Exploded view/ 07 klr650 swingarm/ bearing part numbers

call the company you choose, they will help you (or not) directly.

Nov 30, 2012 | kawasaki Motorcycles

1 Answer

View of petcock and o rings

Hi Roxanne_mut, for more information about your question please visit the website below. Good luck and have nice day.
exploded view petcock harley Google Search

Jun 30, 2011 | 2007 Harley Davidson FXDB Dyna Street Bob

1 Answer

HD 06 dyna street bob

Hi Boypg, for more information about your question, please visit the websites below. Good luck and have nice day.

2006 Harley Davidson FXDBI Dyna Street Bob

Jan 15, 2011 | Harley Davidson FXDBI Street Bob...

1 Answer

How to tighten up drive belt?

There's usually and adjuster at the very end of each side of the swingarm. Make sure that you move each adjuster the same amount so that the rear wheel stays aligned within the swingarm.

Good Luck

Nov 09, 2010 | 2006 Harley Davidson FXDBI Street Bob

1 Answer

Swingarm bearing and seal assembly

If you just are looking for an exploded view. You can view, look only at Can't print or save, just look. Hope this helps.


Oct 27, 2009 | 2005 Harley Davidson FLHTC - FLHTCI...

2 Answers

Replacement of a stock fuel gauge on a '06 Harley Street Bob.

no need to remove tank, Remove terminal pins from connector under left side of tank then pull gauge and wires out. Install new gauge, replace terminal pins in their propper place in the connector,plug it in and varify the repair.

Mar 31, 2009 | 2006 Harley Davidson FXDBI Street Bob

1 Answer

Replacing Exaust

tight. use small amount of blue lock tight on threads.

Mar 29, 2009 | 2006 Harley Davidson FXDBI Street Bob

Not finding what you are looking for?
2007 Harley Davidson FXDB Dyna Street Bob Logo

Related Topics:

18 people viewed this question

Ask a Question

Usually answered in minutes!

Top Harley Davidson Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4731 Answers


Level 3 Expert

4348 Answers


Level 3 Expert

78267 Answers

Are you a Harley Davidson Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides