Question about 2005 Suzuki RM-Z 450

1 Answer

Rmz 450 2008 flywheel problem

I had the same problem with my RMZ450 2008 + last week, I heard a strange noise from my motor and it didn't restart after stopping it on the side of the track, We opened the fly wheel case and saw that it was damaged. Because of the small metal parts everywhere, I decided to open the motor to clean it very well and I found a screw that is use to keep the crankshaft bearing in place in the case broken, 1/2 of the head of the screw was gone and I think that this metal parts cause flywheel damage. My bike has 33 hours and has been remounted last night, first test this weekend

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 867 Answers

Your bottom end is severly damaged and you need to have it rebuilt. sorry this is what happens when things get loose in there.

Posted on Jul 25, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Fork oil capacity for my 2013 RMZ 450

Hi, Anthony for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Yamaha, despair not, for a mere zero $ you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
2013 RMZ450 Suspension
Showa SFF Fork Rebuild Seal Replacement Part 1 Left Fork
Suzuki RM z450 Owner Service Manual
OEM parts for Suzuki

Jan 11, 2017 | 2010 Suzuki RMZ 450

1 Answer

Valve clearance for 2008 Rmz 450?

The valve clearance when cold is
intake 0.009 - 0.016 mm (0.004-0.0006) inch
exhaust 0.17- 0.24 mm (0.007-0.009) inch
This is for a 2009 model don't know if engines are same or if they changed following year.

Jun 01, 2015 | 2008 Suzuki RMZ450

1 Answer

Dose anyone no where the vin number is on a 05 to 08 rmz450 ?

not for sure,but look on the frame right side almost under the frame,about mid way of the engine.

Feb 17, 2014 | 2007 Suzuki RMZ 450

2 Answers

Vin number check on rmz 450

It should be engraved on the frame near the front forks.

Jan 21, 2013 | 2011 Suzuki RMZ450

1 Answer

How do I tighten the timing chain on my 450 RMZ 2006?

You can purchase a maintenance manual for your bike here - They charge 10.95 for the book. There should be a manual chain tension adjustment using allen wrenches, but you'd do well to get the book and do it the Suzuki says. Otherwise, you could wind up with a broken chain or jumped timing to reset.

Oct 21, 2010 | 2005 Suzuki RM-Z 450

2 Answers

Rmz 450 smoking

usual smoke is caused by oil overflow. you may want to drain this one out, check your O-rings and rubber seals, im 99% sure that is the culprit.


May 28, 2009 | 2005 Suzuki RM-Z 450

1 Answer

1994 Grand Prix Starter Problem

There are a couple of things that can cause this. First are you getting good quality starters? Are they really new or are they rebuilt? I would recomend a new AC Delco starter, and you can get them from some parts stores, not just a dealer. A starter relay can cause this too, replace it, it is inexpensive. The third possible cause would be the ignition switch, does it feel funny when you turn the key? The flywheel will nake a starter make unusual noise every time you crank the motor. As far as the keys, I have never heard of such, and I have been a GM mechanic for 20 years. Be sure you are getting a NEW starter. Good Luck

May 20, 2009 | 1994 Pontiac Grand Prix

1 Answer

Hi, what should be suzuki rmz 450(2005) valve clearance, Thanks

The valve clearance settings for the 2005 RMZ450 when the engine is cold are > Exhaust .006 to .009 > Intake .005 to .007, per the factory service manual.

Please rate this answer. Thanks!

Apr 08, 2009 | 2005 Suzuki RM-Z 450

1 Answer

Same problem as earlier individual, moisture in dryer

Your motor could be seizing. It'd make sense because it's making noise when trying too hard to turn when there's a heavy load in it. Or a load at all for that matter. I would say motor needs replaced...

Feb 24, 2009 | Whirlpool LEQ9858P Electric Dryer

Not finding what you are looking for?
2005 Suzuki RM-Z 450 Logo

583 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts


Level 3 Expert

76691 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

4536 Answers


Level 2 Expert

83 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides