Question about kawasaki Motorcycles

1 Answer

What is the Kawaski ZN1100 valve adjustment specs pls?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • kawasaki Master
  • 39,997 Answers

Hi, Candi for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Yamaha, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
Kawasaki KZ 1100 B1 1981 valve clearance
Shims The kit or individual
Kawasaki KZ1100 Service Manual same engine as ZN
OEM Parts for Kawasaki
kawasaki ltd 1100 zn1100 b2 genuine original owner manual $45

Posted on May 16, 2017

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is yhe valve clearance of 1998 kawaski mule kaf620a


Hi Papasgranny, I am sorry you can't find the first and best tool you ever bought for your Kawasaki but despair not for a mere $10 you can download another one. For more information about your issue, please visit the websites below. Good luck and have a nice day.
https://www.tradebit.com/filesharing.php/search/0/1998+kawaski+mule+kaf620a

Nov 01, 2015 | Motorcycles

1 Answer

Need valve lash specs for 1980 suzuki dr400


Suzuki DR400S - Motorcycle Specs

www.motorcyclespecs.co.za/model/suzu/suzuki_dr400s%2080.ht
1980. Engine. Air cooled, four stroke, single cylinder, SOHC, 2 valves per cylinder ....Valve adjustment can be done without a feeler gauge and the CDI has ..

Dr400 valve adjustment 1 - YouTube

? 2:08
www.youtube.com/watch?v=BH-KFrpwo3w
Nov 19, 2010 - Uploaded by obtrailriders
Dr400 valve adjustment 1. ... Suzuki DRZ 400 Valves clearance check \ sprawdzanie luzu zaworowego PART 2 ...

Nov 01, 2015 | Suzuki Cars & Trucks

2 Answers

How you adjust the drive belt on a jdgator 626


John Deere AMT 626 and Kawaski 175 - YouTube

? 4:49
www.youtube.com/watch?v=M2ZcIAMySpI
Jun 28, 2012 - Uploaded by pupbiking Just had a AMT given to me so will work on restoring it lucky it runs after some work ... John Deere AMT 626 and Kawaski 175 ... I tightened up the belt and the chain, Wondering what your chain looks like at the tensioner? ... check out my next video on the amt i got it all done now i did adjust the tensioner so ..

Aug 21, 2015 | Cars & Trucks

1 Answer

What are the valve lash specs for 2007 Honda Accord V6?


There is a specific procedure for setting valve clearance . I highly recommend getting a repair manual for the correct specs & procedure. The engine must be at TDC with the #1 cylinder on the compression stroke , that will allow you to adjust ONLY certain valves , then you have to turn the engine one turn to TDC again only now #1 will be on the exhaust stroke & the rest of the valves can be adjusted . it's important that you know the difference between the two !

Jan 08, 2015 | Honda Cars & Trucks

1 Answer

I have a 91 kawaski ninja 600r. The bike well run fine intill you reach about 6 grand then it falls on its face.I have cleaned the carbs all out. Adjusted tbhe floats to specs and adjusted the air fuel...


if you have modified the intake or exhaust you may need bigger main jets. you could also try raising the needles a notch. move clips down on the needles

Jul 11, 2017 | 1991 kawasaki ZZR 600

1 Answer

What is the valve adjustment spec?


The C90T has Hydrulic valve adjusters and should not need the valves adjusted on it. There is no listed spec only to replace the lifters or adjusters.

Oct 31, 2010 | 2005 Suzuki Boulevard C90T

1 Answer

Hi,im looking for valve clearance specs for the kawaski 23hp fh680v-8s10 motor ??


The adjustment is .003 - .005. You must hold the rocker arm by lifting up on the valve depressing side and pressing down on the push-rod side while making the adjustment. Any other means of adjustment and it will be incorrect.

Below is quoted from the service manual without pictures
(FixYa Note TORQUE on lock screws is 61 inch pounds)

Valve Clearance Inspection
NOTE
?? Valve clearance must be checked when the engine is cold (at room
temperature).
• Remove the rocker cover (see Cylinder Head Removal).
• Place the piston at top dead center (TDC) of the compression stroke
turning the crankshaft clockwise facing the flywheel.
No.1 Cylinder:
?? The left projection [A] on the flywheel is faced with the right leg [B]
on the #1 ignition coil [C] as shown.
?? Check the intake and exhaust valves are closed completely, if not turn
the flywheel one turn (360??) clockwise and face the left projection with
the right leg again.
No.2 Cylinder:
?? The left projection [A] on the flywheel is faced with the right leg [B]
on the #2 ignition coil [C] as shown. Follow No.1 Cylinder alignment.
• Then check the valve clearance.
?? Using a thickness gauge [A], measure the valve clearance between
the rocker arm [B] and the valve stem end.
If the valve clearance is incorrect, adjust it.
Valve Clearance (when cold)
Intake, Exhaust 0.075 0.125 mm (0.003 0.005 in.)

Thanks for using FixYa.

Kelly

May 18, 2010 | Garden

2 Answers

Need help with valve adjustment specs


Exhaust power valve adjustment for "stock setting" is: 1/2 turn out from closed.

Apr 08, 2010 | 2004 Suzuki RM-Z 250

1 Answer

Valve lash


  • INTAKE VALVES: 0.003-0.005 in. (0.08-0.12mm)
  • EXHAUST VALVES: 0.006-0.008 in. (0.16-0.20mm)

  • PLEASE NOTE:
  • THESE SPECS ARE FOR A 4 CYLINDER, THE V6 HAS HYDRAULIC VALVE FOLLOWERS DOES NOT REQUIRE ADJUSTMENT
  • ALL ADJUSTMENTS ARE ON A COLD ENGINE

Aug 11, 2008 | 1992 Honda Accord

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

16 people viewed this question

Ask a Question

Usually answered in minutes!

Top kawasaki Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

yadayada
yadayada

Level 3 Expert

75077 Answers

Gino Cussen
Gino Cussen

Level 2 Expert

216 Answers

Are you a kawasaki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...