Question about 1993 Triumph Trident 900

1 Answer

Triumph trident 93 model side stand works as it should but warning stays on with stand up john

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Triumph Master
  • 40,840 Answers

Hi, John either the switch is faulty or the circuit is grounded to the light that being said the ignition circuit cut-off system comprising of the side stand switch, clutch switch and neutral switch has the following functions:
a. It prevents starting when the transmission is in gear and the side stand is up, but the clutch lever is not pulled.
b. It prevents starting when the transmission is in gear and the clutch lever is pulled, but the side stand is still down.
c. It cuts the running engine when the transmission is in gear and the side stand is moved down.
Periodically check the operation of the ignition circuit cut-off system according to the following tests.
With the engine turned off:
1. Move the side stand down.
2. Make sure that the engine stop switch is set to "RUN"
3. Turn the key to "ON".
4. Shift the transmission into the neutral position.
5. Push the start switch if the engine does not start the neutral switch may be faulty.
With the engine still running:
6. Move the side stand up.
7. Keep the clutch lever pulled.
8. Shift the transmission into gear.
9. Move the side stand down if the engine does not stall you may have a faulty side stand switch.
After the engine has stalled:
10. Move the side stand up.
11. Keep the clutch lever pulled.
12. Push the start switch if the engine does not start you may have a faulty clutch switch.
This check is most reliable if performed with a warmed-up engine.
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
Side stand bypass
Sidestand Clutch Safety switch issues
Triumph TROPHE Service Manual Page 2
http://www.triumphestore.com/
http://mybikemanuals.com/triumph/uncategorized-triumph-owners-manuals

Posted on May 09, 2017

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I remove an alternator from 1998 triumph trident 900


I don't mean to cop out, but I always recommend buying a service manual from say amazon for $15-30 bucks. It's the best money you'll ever spend, lays everything out nice and neat and will keep this awesome ride on the road for years to come.

Feb 10, 2015 | 1998 Triumph Trident 900

1 Answer

HOW MUCH FORK OIL GOES IN EACH FORK LEG FOR THE TRIUMPH TRIDENT 750 1998 MODEL?


My workshop book for the T300 family is dated 1995
Gives for Trident 750 and 900:-
up to VIN 4901
SAE 10 Level Standard = 94mm Level Max 94mm
from VIN 4902
SAE 10 Level Standard = 109mm Level Max 97mm

Hope that helps

Feb 09, 2015 | Triumph Trident 750 Motorcycles

1 Answer

Triumph trident 900


Check the coil for that cylinder, it may be just a loose connection. Make sure the retaining bolts are tight and that there is no corrosion on the mounting points.

Jun 26, 2013 | 1993 Triumph Trident 900

1 Answer

Loud valve rattle sound, guy i got bike from said this is normal on the 900cc sprint triumph is this true


Well my old trumpet sounded like a cuttlery draw being emptied into a tin bucket, lol... yes they DO indeed make a racket, however it shouldn't be TOO loud? As long as it sounds rhythmical and even and there are no "Tinny" (like hitting an empty tin) slapping sounds, then you should be all good.

It wouldn't hurt anything though, to give the Valves a good going over, and "set" them again. this will at least give you piece of mind, that nothing is indeed wrong. I have also found that using a synthetic oil that gets/stays? slightly thicker at running temperature, this too, helps quieten it down too. Also check the valve springs, rocker side play too, maybe it needs a shim? sometimes the springs weaken and cause a louder noise, just replace them if this is suspected. Remember though that the Triumph is a "Loose" motor and they do indeed make a racket, often until they heat up and tolerances tighten, and then it should all purrr.....


http://www.repairmanual.com/category/1996-triumph-trident-900/

repair manual above.

Apr 12, 2011 | 1996 Triumph Trident 900

1 Answer

How do i remove the ignition from my 93 triumph trident sprint 900 i cant remove it from the top clamp


ignition barrells are generaly bolt rivetted to the underside of the top yolk (the head of the bolt snapps off when torqued). To remove the barrell the heads of the two rivets need to be drilled out.

Feb 13, 2010 | 1993 Triumph Trident 900

1 Answer

How do you set fork oil level 93 sprint 900 air gap 110 mm is it with fork extended or compressed spring in or out


It is with the fork extended. You need to no how many CC's of oil to put in so call the local dealer and ask the mechanic.

Oct 18, 2009 | 1993 Triumph Trident 900

1 Answer

. triumph trident 900 trying to remove plastic cover on radiator


Remove the reflector whcih is held in with double sided tape - carefull prise off with a screwdriver.

Underneath are two fixing screws and then cover comes off.

Refit with fresh double sided tape

JR

Jul 15, 2009 | 1993 Triumph Trident 900

1 Answer

Pulley on alternator comes loose


souds to me as though the bolt is shot, and possibly the thread in the shaft. If this has happened again after correct attention you should be seriously looking to strip and rebuild, even Locktight wont heal "wobbly gear shafts".

Mar 24, 2009 | 1998 Triumph Trident 750

Not finding what you are looking for?
1993 Triumph Trident 900 Logo

Related Topics:

18 people viewed this question

Ask a Question

Usually answered in minutes!

Top Triumph Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a Triumph Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...